 Solution

For a slender elastic beam undergoing small bending, assume plane cross-sections remain plane and normal to the neutral axis. Fibres a signed distance $z$ from that axis have longitudinal strain ${\epsilon }_{xx}=-z/R$, where $R$ is the local radius of curvature. Hooke's law gives stress ${\sigma }_{xx}=-Ez/R$, where $E$ is Young's modulus. Zero resultant axial force places the neutral axis through the section's centroid for a homogeneous beam.

The bending moment is the moment of this stress distribution. Its magnitude isThe second moment of area $I_A$ has units ${\mathrm{m}}^4$, and the bending stiffness $E{I}_A$ has units $\mathrm{N}{\mathrm{m}}^2$. A rectangular section of width $b$ and depth $h$ has $I_A=b{h}^3/12$, so placing more material far from the neutral axis strongly resists bending. This is the purpose of an I-section.

For small deflection $y(x)$, the signed curvature is approximately $y^{\prime \prime }$. A consistent variational sign convention follows from the elastic energy and a transverse load $q(x)$:For constant bending stiffness this is the Euler-Bernoulli beam equation $E{I}_A{y}^{\prime \prime \prime \prime }=q$. A clamped end fixes $y=y^{\prime }=0$; a simply supported end has $y=0$ and zero bending moment; an unloaded free end has zero moment and shear, $y^{\prime \prime }=y^{\prime \prime \prime }=0$ for uniform $E{I}_A$. Endpoint loads replace the corresponding zero-force boundary conditions.

For a cantilever of length $L$ carrying a tip force $F$, choose positive deflection along $F$. The internal bending gives $E{I}_A{y}^{\prime \prime }=F(L-x)$, with $y(0)=y^{\prime }(0)=0$. Two integrations giveThis approximation requires small slopes, elastic strains and a length large compared with section dimensions. Shear deformation, rotary inertia, plastic yielding and large rotations require extensions. Adding inertia gives flexural waves with ${\omega }^2=(E{I}_A/{\rho }_m{A}_s)k^4$ for a uniform beam, where ${\rho }_m{A}_s$ is mass per unit length.