A Hall bar is a strip with current contacts at its ends and additional voltage contacts along its sides. Opposite-side contacts measure a transverse electric potential difference; same-side contacts at different longitudinal positions measure a longitudinal electric potential difference. Separate voltage leads reduce the influence of current-contact electrical resistance when their input electric currents are negligible.
Let the first layer have channel resistances and the second , with a common spacer . Define . The same circuit rules giveSubtracting their numerators gives . The sign therefore depends on whether the two layers favor the same global spin channel. With , and , the values reverse: , . The model's ratio is then . Positive magnetoresistance was a consequence of the identical-layer assumptions, not a theorem about every two-channel network.
Define a dimensionless channel contrast and spacer ratio . Positive give , and substitution gives the displayed expression. Equal channel responses, , eliminate the model's magnetic-configuration signal. Increasing the common spacer resistance at fixed increases the denominator and decreases .
This is a controlled comparison within the model. In an actual multilayer, changing a spacer thickness can change the magnetic coupling and the interfaces as well as electrical transport. Spin-flip scattering also mixes the channels that the calculation kept independent.
A quoted percentage needs its denominator. Define the resistance increase relative to the low-resistance state by . The decrease relative to the high-resistance state is instead . For ,The chosen example has and : a increase and a decrease describe the same pair of resistances. A paper reporting a field-induced drop relative to its zero-field value need not be using the same percentage convention as a plot normalized by .
The historical X unit was a practical X-ray wavelength unit, approximately . Its scale used an assigned calcite spacing; relative wavelength measurements could be more precise than absolute determinations. Variation between crystal specimens led to calibration using reference spectral lines. An X unit value therefore cannot simply be read as an exact multiple of .[ref]
Nomenclature System for X-ray Spectroscopy prepared by R. Jenkins and others. IUPAC, Nomenclature system for X-ray spectroscopy, §5.1 Units, printed p. 745
An angular-scale check determines how an indicated rotation corresponds to an angle. A reference line transfers a wavelength scale. An absolute determination ties that scale to an independently established length standard. These are different calibration tasks. Repeating measurements can reduce random scatter without correcting the common scale: if every inferred is too large by a chosen , all inferred absolute wavelengths are too large by , while ratios using that same are unchanged.
Ramsey interferometry uses two coherent pulses with a free interval between them: the first creates a quantum superposition, the interval accumulates relative quantum phase, and the second converts that quantum phase into measurement probabilities. Its attraction is that an ordinary population readout can reveal the quantum coherence hidden from an energy measurement during the free interval.
Here is an ideal qubit model with an explicit pulse convention. Let , prepare , apply , evolve freely with , and apply the inverse pulse before a computational-basis measurement. The first pulse gives . Direct matrix multiplication givesThus the Born rule gives and . Before the second pulse, the same computational-basis measurement would give for both outcomes for every . At , the second pulse changes these probabilities to and . If the two pulses have the same sign instead, the output labels interchange: the pulse convention is part of the prediction.
In a pulse experiment the phase is measured relative to the oscillator supplying the coherent pulses. In a rotating frame, write the free Hamiltonian operator as with signed angular frequency difference in the chosen labeling convention. A free interval then accumulates ; changing the second pulse's phase changes the analysis direction. This comparison makes Ramsey interferometry useful for measuring frequency differences and diagnosing loss of quantum coherence.
For example, suppose the first pulse has prepared a density matrix with equal populations and transverse Bloch vector length :The same inverse analysis pulse yields . The pure state case gives the full ideal fringe; the mixed state gives the flat result . This is a controlled mathematical comparison, not a fit to an experiment. Experimental contrast alone does not identify quantum decoherence: imperfect preparation, pulse errors and readout errors can also reduce it.
There are unlisted articles, also show them or only show them.

