Darcy velocity ($\mathbf{u}=ϵ({\mathbf{v}}_l-{\mathbf{v}}_s)$)

Darcy velocity, also called Darcy flux or specific discharge, is fluid volume flux relative to the solid framework per unit total cross-sectional area. For a uniform axial discharge $Q$ through bulk area $A$,The area includes both solid and voids. Hence Darcy velocity is a superficial flux with units $\mathrm{m}{\mathrm{s}}^{-1}$, even though no fluid travels through the solid part. For a nonuniform discharge, $Q={\int }_A\mathbf{q}\cdot \mathbf{n}dA$, with $\mathbf{n}$ the unit normal; $Q/A$ is the area average of the normal Darcy flux.

If porosity is $ϵ$, the pore-volume-averaged liquid velocity is ${\mathbf{v}}_l$, and the local solid framework velocity is ${\mathbf{v}}_s$, the convention used here is $\mathbf{u}=ϵ({\mathbf{v}}_l-{\mathbf{v}}_s)$. In a stationary, fully saturated framework with all pore volume participating, ${\mathbf{v}}_l=\mathbf{q}/ϵ$. The notation $\varphi =ϵ$ for porosity is equally common. Darcy flow through a homogeneous slab gives $q=2.0\times 10^{-5}\mathrm{m}{\mathrm{s}}^{-1}$ but pore velocity $v=8.0\times 10^{-5}\mathrm{m}{\mathrm{s}}^{-1}$ at $\varphi =0.25$. Keeping these quantities separate lets Darcy law predict filter discharge while pore velocity predicts ideal advective travel time.^[ref]

Pore velocity is the fluid velocity averaged over pore volume relative to the solid framework. For uniform porosity $\varphi$, full saturation and all pores participating, $\mathbf{v}=\mathbf{q}/\varphi$, with Darcy velocity $\mathbf{q}$ defined per bulk area. The identity follows from volume averaging: extending the relative fluid velocity by zero in the solid gives a bulk average equal to the pore fraction times the pore-volume average. It does not assert that every local passage has open area $\varphi A$ or identical speed.

In a uniform advective model, travel over length $L$ takes $L/v=\varphi L/q$. If some pore volume is inaccessible to transport, the corresponding estimate uses effective porosity ${\varphi }_e$ and $v=q/{\varphi }_e$. A connected but nearly stagnant passage can exchange solute slowly, so even this mean does not describe all arrival times. Flux-weighted residence time in a porous layer explains one precise averaging convention.^[ref]