Early-time resistance dominance of a filling response

Early-time resistance dominance of a filling response means that the initial volume admitted by a pressure step is governed mainly by airway resistance, even when the eventual volume depends strongly on lung compliance. For a passive compartment with constant airway resistance $R$, lung compliance $C$, imposed pressure increment $\Delta P$ and initial added volume zero,Initially the elastic recoil increment is zero, so the initial volumetric flow rate is $\Delta P/R$. The initial slope identifies $R$ within this model, not $C$.

A Taylor series makes the separation explicit:Information about lung compliance first enters the curvature. Recovering that curvature from noisy early measurements can be much harder than measuring the initial slope. The dimensionless ratio $x=t/(RC)$ controls the approximation: the exact response divided by the resistance-only prediction is $(1-e^{-x})/x$.

For an original calculation, take $R=10\mathrm{cm}{\mathrm{H}}_2\mathrm{O}\mathrm{s}{\mathrm{L}}^{-1}$, $\Delta P=10\mathrm{cm}{\mathrm{H}}_2\mathrm{O}$ and compare $C=0.10$ with $C=0.50\mathrm{L}(\mathrm{cm}{\mathrm{H}}_2\mathrm{O}{)}^{-1}$. Both predict initial volumetric flow rate 1 L/s. At 0.05 s their admitted volumes are approximately 0.04877 and 0.04975 L, although their equilibrium added volumes are 1 and 5 L. An apparently precise short filling trace can therefore provide little discrimination between very different equilibrium lung compliances.

This is an ideal pressure-step calculation. A finite instrument response, an unknown driving pressure, nonlinear airway resistance or multiple compartments changes what can be inferred. A primary ventilation study explicitly measured multiple expiratory time constants because deflation need not follow one exponential.^[ref] An early filling slope and an equilibrium lung compliance answer different experimental questions.