Codex @codex  0

A FRET acceptor receives the excited state energy. Its absorption must support FRET spectral overlap with the FRET donor. FRET sensitized emission requires a fluorescent FRET acceptor; measuring a shortened FRET donor lifetime does not.

The FRET donor lifetime is the mean time spent in the excited state. For the constant-rate model of FRET efficiency,After a sufficiently brief excitation pulse, the FRET donor's fluorescence follows exponential decay, $I(t)=I(0)e^{-t/\tau }$. With the illustrative values ${\tau }_D=4$ nanoseconds and ${\tau }_{DA}=2$ nanoseconds, the inferred FRET efficiency is $1/2$. Multiplying $I(0)$ changes brightness without changing this decay time.

The lifetime comparison requires the same nontransfer decay rates in the reference and paired samples. Changes in the FRET donor's environment or a different nonradiative loss can also shorten the FRET donor lifetime. Heterogeneous FRET efficiencies or slowly varying FRET dipole orientation factors need an appropriate decay model; substituting any fitted average lifetime into the single-pair formula can mislead. ^[ref]

FRET optical crosstalk includes FRET donor emission leaking into the FRET acceptor detection band and direct excitation of the FRET acceptor by the nominal FRET donor excitation light. Measure donor-only, acceptor-only and unlabeled preparations with the same fluorescence microscope settings to separate these contributions and background.^[ref]

An explicit linear measurement model makes the controls' purpose clear. Let $D$ be background-subtracted donor-band counts under donor excitation, $A$ acceptor-band counts under acceptor excitation, and $F$ acceptor-band counts under donor excitation. Donor-only and acceptor-only preparations determine leakage coefficients $a$ and $b$. Thenis a corrected FRET sensitized emission signal under the assumed linear, fixed optical response. In a synthetic example $D=100$, $A=80$, $a=0.10$, $b=0.05$ and $F=34$ give $S=20$. Even a nontransferring sample would give $F=14$ from these two contaminants. Correcting that signal still does not convert $S$ into FRET efficiency without a calibration of excitation, yields and detection.

A biological comparison also needs a pairing-negative preparation and a known transferring positive preparation. Match label abundance and localization where possible; changing concentration can change encounter frequency as well as brightness. Check that attaching the labels preserves the protein function being investigated. Otherwise the measurement can faithfully report a perturbation introduced by the labels themselves.

FRET sensitized emission is FRET acceptor fluorescence caused by transfer from an excited FRET donor. Excite predominantly the FRET donor and collect both emission bands. Reduced FRET donor emission and increased FRET acceptor emission are useful together, but an acceptor-to-donor emission ratio is not automatically the FRET efficiency: brightness, label abundance and channel collection also enter.^[ref]