A body turning about a fulcrum. In static balance, effort and load supply equal and opposite torques: , where the distances are perpendicular lever arms. Its ideal mechanical advantage is . Measuring distances along the body instead of perpendicular to the force lines can give the wrong answer.
A third-class lever places the applied effort between the fulcrum and the load. For perpendicular loads on a straight ideal lever, the effort lever arm is shorter than the load arm . Static torque balance gives , so its mechanical advantage is less than one.
The arrangement trades a larger required force for a larger load-end travel and speed. Tweezers provide a familiar model: the fingers press between the joined end and the gripping tips. For a small rotation, tip displacement is proportional to its distance from the pivot, so the displacement ratio is inverse to the force ratio. An ideal lever therefore conserves work while changing the force and motion scales.
A second-class lever places the load between the fulcrum and the applied effort. In the simple straight-lever geometry with perpendicular forces, the effort lever arm is longer than the load arm. Static torque balance then gives mechanical advantage .
A wheelbarrow illustrates the geometry when the wheel axle acts as the pivot, the carried load lies between axle and handles, and the hands supply the effort. The handles must move through a greater distance than the load's corresponding vertical motion. That motion trade follows directly from a common small rotation and explains why a reduced effort force does not imply reduced ideal work. Actual geometry and force directions determine the perpendicular arms; distances measured along an inclined body cannot always be substituted unchanged.
A first-class lever places the fulcrum between the applied effort and the load. The two loads produce opposite torques about the pivot, with equilibrium condition for the perpendicular lever arms. Its mechanical advantage can be greater than, equal to or less than one depending on the arm ratio.
A balanced seesaw is a direct test: equal loads balance at equal arms, while moving one load closer to the pivot requires a larger load there to maintain balance. For a small rotation, the two ends move in opposite directions and their travel distances scale with their distances from the pivot. The force ratio and displacement ratio therefore compensate in an ideal work balance. The defining feature is the pivot's position between effort and load, rather than a guaranteed force multiplication.
The support or pivot about which a lever turns.

Articles by others on the same topic (1)

Lever can refer to a few different things depending on the context: 1. **Recruitment Software**: Lever is a popular applicant tracking system (ATS) and recruitment software that helps companies streamline their hiring processes. It offers features for managing job postings, tracking candidates, collaborating with hiring teams, and managing interviews and offers.