Past exam of the mathematics course of the University of Cambridge / 2012 / iii / Paper 60 / 3

For an optically thin low-density gas in collisional ionization equilibrium, the astrophysical cooling function collects losses per pair of hydrogen nuclei into $\mathcal{C}=n_H^2\Lambda (T)$. Its units are $\mathrm{erg}\mathrm{c}{\mathrm{m}}^3{\mathrm{s}}^{-1}$; the time unit is missing from the printed guide to the vertical-axis labels. For the primordial atomic cooling curve, only hydrogen and helium provide bound-state coolants.

Near $10^4\mathrm{K}$, collisional excitation of hydrogen becomes effective and subsequent photon emission removes thermal energy. The excitation rate is exponentially suppressed below the atomic energy threshold. Atomic line cooling and collisional ionization generate a strong hydrogen feature around a few $10^4\mathrm{K}$; helium excitation and ionization produce further structure around $10^5\mathrm{K}$. Radiative recombination also contributes. Once the gas is highly ionized, these bound-state losses weaken. At $T\gtrsim 10^6$–$10^7\mathrm{K}$, thermal bremsstrahlung dominates, with approximately $\Lambda \propto T^{1/2}$ apart from slowly varying factors. The figure is an original qualitative sketch anchored to the two supplied values, not an atomic-rate calculation.

Increasing galactic metallicity adds many ionic transitions, producing metal-line cooling and substantially enhancing cooling, particularly in the $10^5$–$10^7\mathrm{K}$ range. Metals also provide low-energy fine-structure transitions below $10^4\mathrm{K}$. The change is not a uniform vertical shift: the positions and strengths of features depend on the elemental abundances and ionization state.

Photoionization removes bound electrons even where collisions alone would leave atoms neutral, often suppressing the hydrogen and helium line peaks and changing the metal-ion population. It also adds photoionization heating. The net thermal loss is then $\mathcal{C}-\mathcal{H}$, with possible heating-cooling equilibrium near $10^4\mathrm{K}$. A single density-independent $\Lambda (T)$ no longer describes every irradiated cloud: the answer also depends on radiation intensity, spectrum, shielding and density. The illustrative photoionized curve denotes altered cooling alone, not the net loss including heating.

Below $10^4\mathrm{K}$, primordial gas can use molecular line cooling, especially rotational and vibrational transitions of molecular hydrogen and, in suitable chemical conditions, hydrogen deuteride. Molecule formation and protection against photodissociation are essential. Enriched gas can additionally use metal-line cooling, other molecular species and dust thermal emission, with gas-dust energy exchange important at high density. At high cosmological redshift, residual free electrons can transfer energy to the cosmic microwave background through Compton cooling by the cosmic microwave background if the gas is hotter than the radiation. Expansion can also cool gas adiabatically, but neither that process nor Compton cooling by the cosmic microwave background is an $n_H^2$ atomic loss law. The atomic threshold is a cooling-channel limitation, not a universal minimum gas temperature.

Let $X$ be the hydrogen mass fraction, $f_g={\rho }_g/{\rho }_{\mathrm{tot}}$ the gravitating gas fraction, and $\chi =n_{\mathrm{tot}}/n_H$ the total-particle-to-hydrogen ratio. The optically thin gas cooling time and free-fall time of a uniform sphere arewhere ${\rho }_{\mathrm{tot}}=m_p{n}_H/(X{f}_g)$. Equating them gives the cooling-to-free-fall equality curve:At fixed composition, its shape is $n_{\mathrm{crit}}\propto T^2/{\Lambda }^2$. Gas above this curve cools faster than it falls; gas below it cools more slowly. Strong line cooling produces a deep low-density trough. In the high-temperature free-free regime, $\Lambda \propto T^{1/2}$ gives $n_{\mathrm{crit}}\propto T$.

The displayed uniform self-gravitating-cloud example uses $f_g=1$, $X=0.76$, $\mu \simeq 0.59$ and $\chi \simeq 2.24$. Holding these ionized-gas factors fixed makes the diagram transparent, but near the atomic threshold their actual temperature dependence changes numerical normalizations. With these conventions the supplied cooling values imply $n_{\mathrm{crit}}(1.5\times 10^4\mathrm{K})\simeq 9.6\times 10^{-10}\mathrm{c}{\mathrm{m}}^{-3}$ and $n_{\mathrm{crit}}(10^7\mathrm{K})\simeq 0.107\mathrm{c}{\mathrm{m}}^{-3}$. For gas supported in a dark-matter-dominated dark matter halo, take $f_g<1$: at fixed $n_H$ the free-fall time of a uniform sphere is shorter and the critical curve shifts upward by $1/f_g$.

To add virial mass contours in a cooling diagram, use the uniform self-gravitating sphere consistently. Its Newtonian gravitational potential energy is $-3G{M}^2/(5R)$ and its thermal kinetic energy is $(3/2)M{k}_{B}T/(\mu m_p)$. The virial theorem gives $k_B{T}_{\mathrm{vir}}=\mu m_{p}GM/(5R)$, while $M=(4\pi /3)R^3{\rho }_{\mathrm{tot}}$. Eliminating $R$ givesThus constant total gravitating mass gives slope three in the logarithmic density-temperature plane, with larger mass contours lying at smaller density. A different density profile changes the structural coefficient; the customary halo temperature scale $k_B{T}_{\mathrm{vir}}=\mu m_{p}GM/(2R)$ shifts the mass contours but preserves their slopes. The horizontal illustrative formation-density lines are $n_{H,\mathrm{vir}}\simeq {\Delta }_v(2\times 10^{-7})(1+z{)}^3\mathrm{c}{\mathrm{m}}^{-3}$, using ${\Delta }_v=18{\pi }^2$. They show why increasing formation cosmological redshift helps gas reach the rapid-cooling region.

At the low-mass end, a dark matter halo's virial temperature may not reach the atomic threshold. The atomic and molecular cooling thresholds for galaxy formation therefore favor an atomic-cooling mass of order $10^8{M}_{\odot }$ at early formation epochs, with its precise value varying as approximately $(1+z{)}^{-3/2}$. Smaller primordial systems require molecules; photoheating and stellar feedback further suppress their luminous output.

At the high-mass end, the virial temperature at a fixed assembly density scales as $M^{2/3}$. Beyond the line-cooling interval the gas becomes increasingly hot, while thermal bremsstrahlung improves only as $T^{1/2}$. Hence at fixed assembly density $t_{\mathrm{cool}}/t_{\mathrm{ff}}\propto T^{1/2}\propto M^{1/3}$ in that regime. Large systems can remain pressure-supported hot atmospheres for many dynamical times, instead of promptly fragmenting into one stellar object. This is the upper galaxy mass from gas cooling: it associates efficient condensation with roughly galactic, rather than group or cluster, masses and motivates the broad $10^8$–$10^{12}{M}_{\odot }$ interval.

The diagram gives characteristic cooling scales, not exact universal mass bounds. Density profiles, gas fraction, enrichment and formation epoch move the boundaries; the two supplied values alone do not determine a complete numerical cutoff. Some gas can cool in dense cores of larger dark-matter haloes, early smaller progenitors can form stars before merging, and subsequent galaxy mergers can assemble more massive galaxies. Long-lived hot atmospheres also require heating to prevent excessive late-time cooling. These qualifications explain why the cooling criterion for galaxy formation is useful without equating each dark dark matter halo to one galaxy.

The dark matter halo population follows gravitational hierarchical galaxy formation: many low-mass dark-matter haloes and an exponentially rare high-mass tail. The Press-Schechter halo mass function captures this broad form. A constant conversion from dark matter halo mass to luminosity would simply rescale that distribution and predict too much light from both very small and very large systems. The luminosity function instead has a shallower faint end and a sharp bright-end decline, often described by a Schechter function,Define the halo star-formation efficiency as ${ϵ}_{\ast }(M_h)=M_{\ast }/(f_b{M}_h)$, distinguishing this integrated baryon conversion from the star-formation efficiency per free-fall time. If the stellar mass-to-light ratio is ${{\rm Y}}_{\ast }$, a simple one-central-galaxy mapping is $L={ϵ}_{\ast }{f}_b{M}_h/{{\rm Y}}_{\ast }$. For a monotone mapping without scatter,Thus a mass-dependent conversion efficiency and its Jacobian change the shape, not just the horizontal scale, of the luminosity function. Scatter, satellites and the stellar mass-to-light ratio add further differences.

In shallow potential wells, photoheating can prevent gas accretion, while stellar feedback from radiation, stellar winds and supernovae heats or ejects gas. These effects lower halo star-formation efficiency toward low mass, helping flatten the faint end. The need for atomic or molecular line cooling also affects the smallest systems. Intermediate-mass dark-matter haloes retain gas and cool efficiently, so the integrated conversion reaches a maximum around galactic dark matter halo masses.

In massive dark-matter haloes, long optically thin gas cooling times and stable hot atmospheres reduce fresh cold-gas supply. Active-galactic-nucleus feedback can replenish the thermal energy lost in cooling and suppress a cooling flow, reducing halo star-formation efficiency and sharpening the bright cutoff. Massive group or cluster dark-matter haloes contain many distinct galaxies rather than one object with luminosity proportional to their entire mass. Galaxy mergers redistribute stars and can grow already formed bright galaxies, but do not turn all hot dark matter halo gas into new stars. The luminosity function is the gravitational dark matter halo population filtered through strongly mass-dependent baryonic physics. The plotted abundance and efficiency curves are qualitative examples, not observational fits or calibrated mass-to-light relations.