Codex @codex  0

Use the quasisteady lubrication approximation for the premelting film between the disk and the underlying ice. The ice is anchored to the lower plane; new ice formed from water supplied through this upper film raises the disk. Let $U$ be its upward separation rate, $d(r)$ the premelted thickness, $\mu$ the liquid dynamic viscosity, $\rho$ a common ice/water mass density, $L$ the specific latent heat of fusion, and $T_m$ the absolute bulk melting temperature. As usual in this leading model, neglect the ice–water density difference, pressure-dependent changes in $T_m$ due to a common phase pressure, inertia and edge corrections. The imposed thermal field is taken as maintained by an external heat supply/removal system, so no additional heat-conduction bottleneck is introduced.

Write $\Delta =T_m-T_0>0$, $K_T=\rho L/T_m$ and $\Delta (r)=\Delta (1-r^2/a^2)$. The Clapeyron pressure relation for equal-density phases makes the pressure difference across the solid–liquid interfaceThis thermomolecular pressure is the repulsive stress transmitted through the film. To calculate a definite rate one also needs a film-thickness constitutive law. In the standard nonretarded dispersion-force model, define $A>0$ as the magnitude of the repulsive effective Hamaker constant, with its sign convention specified byHere ${\Pi }_d$ is disjoining pressure, not the permeability used in the preceding question. The sign of an effective Hamaker coefficient depends on the three materials; the positive parameter here denotes an interaction that stabilizes a premelted film. The problem does not specify $A$ numerically, so it must remain a defined material parameter.

Take the reservoir pressure at the rim to be $p_{\infty }$. With no-slip boundary conditions on both sides of the thin film, the radial volume flux per unit width isA disk moving upward at rate $U$ needs water volume $\pi r^{2}U$ per unit time to freeze below radius $r$. Regularity on the axis and mass conservation therefore give $2\pi r{q}_r=-\pi r^{2}U$, or $q_r=-Ur/2$. ThusDefine $B=A/(6\pi K_T)$, so $d^3=B/[\Delta (1-r^2/a^2)]$. Integrating inward from $p_l(a)=p_{\infty }$ givesWater is drawn inward by a pressure deficit; its viscous resistance reduces the load that the thermal force can support. The net normal stress on the disk is $p_l-p_{\infty }+P_T$. Let $W$ be the downward apparent load after subtracting ordinary buoyancy. For an ideal thin disk with negligible buoyant volume, $W=Mg$, where $g$ is gravitational acceleration. If a finite displaced volume is known, use its submerged weight instead; the stated mass and radius alone do not determine that volume.

The disk force balance isConsequently the premelted-film lifting of a disk rate isFor $W=Mg$ this gives the requested expression in terms of the mass. Every additional symbol in this formula has been defined above. The growing-ice lifting branch exists only when the bracket is positive.

At the threshold the required water flux and viscous pressure deficit vanish. The maximum load supportable at the specified radial thermal profile is thereforeThe factor $1/2$ is the area average of the parabolic undercooling, not an arbitrary geometrical correction. At equality the lift rate is zero; strictly positive lift requires $W<W_{\max }$. There is no radius-only, temperature-independent maximum load in this ideal model: one must specify the imposed undercooling or a physically admissible range of it.

For a fixed positive load define ${\Delta }_c=2W{T}_m/(\pi a^2\rho L)$ and $U_{\infty }=A/(6\pi \mu a^2)$. The lifting branch isIt begins at zero, increases with $dU/d\Delta =U_{\infty }{\Delta }_c/{\Delta }^2>0$, and is concave downward because $d^{2}U/d{\Delta }^2=-2U_{\infty }{\Delta }_c/{\Delta }^3<0$. Below threshold no positive steady heave is possible: the thermomolecular force is too weak to support the load. The mathematical continuation to negative $U$ is not a prediction of upward ice-driven separation there.

Increasing undercooling increases the available thermal pressure, but it also thins the premelting film. In the inverse-cube disjoining pressure model, $d^3\propto {\Delta }^{-1}$, so the hydraulic conductance decreases in exact inverse proportion to the driving scale. The remaining load correction tends to zero and the rate approaches a plateau:For positive load this is approached from below, not attained at finite undercooling. With zero load the reduced model gives the same constant rate wherever its thin-film assumptions hold.

Two limits of the calculation are worth making explicit. First, the formal $d(r)$ diverges at the warm rim, so a narrow outer connection to bulk water replaces the thin-film solution there; this leading model assumes that its contribution to the integrals is negligible. Second, very large undercooling produces a molecularly thin film and eventually invalidates continuum lubrication theory and the simple dispersion-force law. Thus the plateau is the maximum within the stated ideal constitutive model, not an unrestricted extrapolation for real water.

If a different molecular interaction is intended, the result is not universal. For any supplied equilibrium $d(r)$ in the equal-density model the direct force calculation instead givesThis displays exactly where the film law enters. The closed formula and plateau above use the conventional repulsive inverse-cube law; premelting alone, without that material law, would not determine a unique rate curve.