Codex @codex  0

A modulation-doped GaAs-AlGaAs electron gas is confined on the GaAs side of the interface. The larger-gap AlGaAs supplies a conduction-band barrier; charge transfer from remote donors and the resulting electric field bend the bands into an approximately triangular well. transverse electronic mode wavefunctions are confined normal to the interface but free in its plane. electrons settle into the well until their electrochemical potential agrees with the donor/contact environment. An undoped spacer separates mobile electrons from ionized donors, reducing impurity scattering. Equilibrium has one Fermi level across the structure; the conduction-band edge is not flat. Surface depletion and the cap also affect the profile. The original drawing illustrates one occupied confinement transverse electronic mode; a single spatial electron gas need not in general imply only one occupied vertical transverse electronic mode.

molecular beam epitaxy can grow a clean GaAs buffer/channel, an undoped AlGaAs spacer, a Si-doped AlGaAs supply region and a protective GaAs cap on a suitable substrate. Control composition, interface quality and background impurities during growth; placing dopants directly in the channel defeats the principal mobility advantage. Define a mesa or isolation region, fabricate low-resistance ohmic contacts to the buried gas, and pattern fine metal split gates by electron beam lithography and the lift-off process. Negative gate bias depletes the underlying gas, leaving a narrow channel between the gates. Check contact resistance, leakage, carrier density and mobility; operation with ballistic electron transport requires channel length shorter than the relevant scattering lengths and smooth confinement on the wavelength scale. The lithographic gap does not equal the electrical width because of lateral depletion.

For a long uniform channel supporting ballistic electron transport, transverse confinement creates thresholds $E_n$ with continuous longitudinal propagation above each threshold. One directed spin branch of a transverse electronic mode has states per length $dk/(2\pi )$ and group velocity $v={\hslash }^{-1}dE/dk$. Hence $vdk/(2\pi )=dE/h$: velocity cancels the one-dimensional density of states. Including two unresolved spin states,For low temperature and small bias, a fully open transverse electronic mode has $T_n(E_F)=1$, givingThe assumptions are ideal reservoirs/contacts, negligible reflection and interactions that would invalidate the independent-subband description, and unresolved spin splitting. A resolved spin branch contributes $e^2/h$. The finite two-terminal electrical resistance is a contact/mode-injection effect, despite the absence of dissipative scattering inside the ideal channel.

For voltage partition in a ballistic constriction, a short saddle has strong local electric-field and electrostatic screening variation near its entrances and barrier, rather than the uniform Ohmic voltage gradient of a diffusive wire. Right-moving incident states inherit the source distribution and left-moving states the drain distribution; there is no unique local equilibrium chemical potential inside an ideal ballistic saddle. The electrostatic potential must be determined self-consistently. In a symmetric rigid-barrier approximation, the barrier follows the mean lead potential and half the electrochemical bias lies on each side. This is a stated approximation, not a universal spatial voltage profile.

For a saddle $U=U_0-m^{\ast }{\omega }_x^2{x}^2/2+m^{\ast }{\omega }_y^2{y}^2/2$, transverse electronic mode thresholds are $E_n=U_0+\hslash {\omega }_y(n+1/2)$. The smooth-barrier transmission is $T_n(E)=[1+\exp (-2\pi (E-E_n)/(\hslash {\omega }_x)){]}^{-1}$, approaching a step for a sharp threshold on the bias/thermal scale.^[ref]

Let ${\mu }_{S,D}=E_F\pm eV/2$ and assume no additional bias dependence of $T_n$. At zero temperature,When the source and drain sample $N+1$ and $N$ thresholds, the differential electrical conductance is $(N+1/2)2e^2/h$. These half plateaus arise from the two ends of the bias window, not fractional carriers. The dc ratio $I/V$ need not share their plateau values. Heating, spin splitting and interaction-induced features must be distinguished experimentally.

In bias spectroscopy of one-dimensional subbands, plot differential electrical conductance or its gate derivative against gate bias and source-drain bias. Threshold branches occur where $E_n(V_g)={\mu }_S$ or ${\mu }_D$. When one bias-window edge meets $E_n$ and the other $E_{n+1}$,Thus the intersections of adjacent threshold branches calibrate the one-dimensional spacing directly in energy. A gate lever arm $\alpha =-e^{-1}\partial E_n/\partial V_g$ can then convert gate intervals to energy; it should be measured rather than guessed. Asymmetric bias partition, a moving barrier or a gate-dependent spacing modifies slopes and plateau weights, requiring the corresponding self-consistent bias model.

A quantum point contact is made by using negative surface split gates to leave a short narrow channel in a clean two-dimensional electron gas. Its length should be smaller than the transport mean free path; transverse confinement should be strong enough that subband spacing exceeds thermal and lifetime broadening. Low-resistance Ohmic contacts connect large reservoirs. Apply a small source–drain bias, measure current and differential conductance, and sweep the gate to change the channel width or barrier height. Contact and wiring series resistance must be accounted for when comparing plateau values.

The Landauer formula explains the conductance without treating the short channel as a diffusive wire. For each propagating one-dimensional mode, the density of states and group velocity cancel in the incident flux, leaving $e/h$ per spin per energy interval. The reservoir occupation difference supplies the net current:The factor two assumes unresolved spin degeneracy. In zero-temperature linear response,A well-transmitted channel has $T_n\simeq 1$, giving steps $G=N(2e^2/h)$ as modes open. A finite two-terminal resistance persists even for a perfectly ballistic channel because reservoirs inject only a finite number of modes; it is not evidence of resistive scattering inside the channel. Gate-controlled point-contact conductance quantization was demonstrated in a two-dimensional electron gas.^[ref]

The saddle-point model of a quantum point contact resolves how modes open. Near the bottleneck, choose the channel direction as $x$ and writeTransverse harmonic confinement gives barrier tops $E_n=U_0+\hslash {\omega }_y(n+1/2)$. Scattering through the inverted longitudinal harmonic barrier givesSmall longitudinal curvature makes a sharp transmission threshold compared with the transverse subband spacing; finite curvature rounds each conductance step. This is the explicit smooth-barrier model developed for a saddle constriction.^[ref]

At larger source–drain bias, the current samples a finite energy window. For a rigid transmission spectrum at zero temperature,With symmetric bias, ${\mu }_{S,D}=E_F\pm eV/2$, the nonlinear conductance of a quantum point contact isIf both window edges sample $N$ open modes, the usual plateau remains. If one edge samples $N+1$ and the other $N$, differential conductance approaches $(N+1/2)(2e^2/h)$: a half-integer plateau relative to the zero-bias step. It is a bias-window effect, not half an electron spin degeneracy. Ridges in gate–bias transconductance occur when a reservoir chemical potential crosses a subband threshold; their separations can measure subband energies.

The half-plateau expression assumes symmetric bias and an approximately bias-independent barrier. An asymmetric voltage drop or self-consistent shift of $U_0$ changes the numerical relation. At still larger biases, heating and inelastic scattering can invalidate a rigid elastic saddle model. Thus the zero-bias quantization counts transmitted modes, while nonlinear spectroscopy compares mode counts at the two ends of the bias window.