The strong evidence is the reproducible conversion between mechanical work and thermal changes. In Joule's paddle-wheel experiment, descending masses drive vanes in a liquid, and a measured input of mechanical energy produces a measured rise in temperature. Allowing for the vessel and thermal losses gives a quantitative mechanical equivalent. Sustained frictional heating, including Rumford's cannon-boring experiment, also challenged a simple account in which rubbing merely released a fixed stored supply of a material heat fluid.[ref]
On the Mechanical Equivalent of Heat by James Prescott Joule. 1850, friction experiments and calorimetric corrections
Electrical and compressional experiments reinforce the connection. A resistor warms under Joule heating, with electrical input . A gas compressed with little heat transfer can rise in temperature, showing that mechanical work can increase its internal energy. Conversely an expanding gas can perform work while cooling. Such experiments connect several kinds of change through a conserved energy balance.
The kinetic theory of gases supplies a microscopic model. Translational molecular motion produces momentum transfer to walls; for a dilute monatomic ideal gas,Thus increasing molecular kinetic energy is reflected in temperature and pressure changes. These formulas describe a specified model, not a proof that every substance's internal energy consists only of translational motion. Rotations, vibrations and intermolecular potential energy also matter.
In modern terminology, heat is energy transferred because of a temperature difference. The body has internal energy, and microscopic motion accounts for part of it. Calling heat “a form of motion” captures the historical rejection of a conserved material caloric, but should not obscure that distinction between stored energy and an energy-transfer process.
Rumford's cannon-boring experiment Created 2026-10-31 Updated 2026-11-05
Rumford's cannon-boring experiment tested whether frictional heating could be explained as release of a finite store of caloric. In his 1798 paper, Count Rumford describes rotating gun-metal against a borer while enclosing the heated cylinder in a water-filled wooden box. In Experiment No. 3, the cylinder turned at about revolutions per minute, and the surrounding water boiled after hours minutes.[ref]
An inquiry concerning the source of the heat which is excited by friction by Benjamin Thompson. Experiment No. 3: water-tight box, rotation rate and temperature record
A separate control compared hot metal chips with thin strips cut from the same metal. Mixing equal masses into equal quantities of cold water gave nearly equal final temperatures, challenging an explanation based on a large change in specific heat capacity during cutting.[ref]
An inquiry concerning the source of the heat which is excited by friction by Benjamin Thompson. Opening metal-chip/strip calorimetry comparison and repeated trials
Continued mechanical input, rather than depletion of an evident material heat store, was the striking result. A modern quantitative energy balance must also include warming of the apparatus, environmental losses and measured mechanical work; boiling by itself does not determine an exact mechanical equivalent of heat.