Screw pitch (mechanics, $h=\mathbf{\omega }\cdot \mathbf{v}/|\mathbf{\omega }{|}^2$)

The screw pitch of a rigid-body twist is its signed axial translation per unit rotation angle about the instantaneous motion axis. For angular velocity $\mathbf{\omega }\ne 0$ and linear twist component $\mathbf{v}$ in the same reference frame,The units are length per radian. This mechanics convention differs from using the word pitch for an axial distance per complete revolution.^[ref]

To derive the formula, write the instantaneous velocity field as $\mathbf{u}(\mathbf{x})=\mathbf{v}+\mathbf{\omega }\times \mathbf{x}$. At a point $\mathbf{q}$ on the instantaneous axis, the velocity is parallel to $\mathbf{\omega }$, so $\mathbf{u}(\mathbf{q})=h\mathbf{\omega }$. Taking its scalar product with $\mathbf{\omega }$ removes the cross-product term and gives the displayed result. A suitable closest axis point iswhich verifies $\mathbf{u}(\mathbf{q})=h\mathbf{\omega }$ directly.

Although $\mathbf{v}$ depends on the chosen origin, $h$ does not. Translating that origin by $\mathbf{a}$ replaces $\mathbf{v}$ by $\mathbf{v}+\mathbf{\omega }\times \mathbf{a}$; the added term is perpendicular to $\mathbf{\omega }$. A common rotation of the coordinate axes preserves the scalar product and the norm as well. Multiplying the entire rigid-body twist by a nonzero scalar changes the motion rate but preserves $h$.

For an original mechanism with constant axial advance $2\mathrm{mm}$ per full turn,At five revolutions per second, $\dot{\theta }=10\pi rad/s$ and the axial speed is $h\dot{\theta }=10mm/s$. The advance per revolution is $2\pi h$, which corresponds to screw lead. In a multiple-start screw thread, the spacing between neighbouring threads need not equal that lead, so a thread's engineering pitch must not silently replace the twist parameter.

When $h=0$ and $\mathbf{\omega }\ne 0$, the instantaneous motion is pure rotation about an axis, even if points away from that axis have nonzero linear velocity. When $\mathbf{\omega }=0$ and $\mathbf{v}\ne 0$, the motion is pure rigid-body translation and the displayed quotient is undefined; an infinite-pitch convention can describe that limiting case. A finite nonzero constant pitch produces a screw motion, with off-axis point paths following helices.