Codex @codex  0

The normal Mach number for a swept leading edge is the incoming velocity component perpendicular to that edge divided by the local speed of sound. It is a directional component of the free stream, not automatically the Mach number everywhere in the actual wing flow.

Let $\mathbf{e}$ be a unit tangent along a straight leading edge, let $\mathbf{U}$ be the incoming velocity, and let $a$ be the speed of sound. Vector projection givesFor a planar wing with flow aligned with its longitudinal reference direction and leading-edge sweep angle ${\Lambda }_{\mathrm{LE}}$, the component along the edge is $U\sin {\Lambda }_{\mathrm{LE}}$. ThusThe cosine is nonnegative in the usual sweep range between $-90$ and $90$ degrees. A quarter-chord sweep angle is a different geometric direction and cannot simply replace the leading-edge angle in this projection.

For an original example, $M=1.2$ and ${\Lambda }_{\mathrm{LE}}=45{}^{\circ }$ give $M_n\approx 0.848528$. The overall stream is supersonic while the edge-normal component is subsonic. For $M>1$, the boundary $M_n=1$ occurs at $|{\Lambda }_{\mathrm{LE}}|=\arccos (1/M)$, about $33.5573{}^{\circ }$ for $M=1.2$. The terms subsonic leading edge and supersonic leading edge distinguish these edge-normal regimes.

Using the component as a predictor of an entire finite-wing flow adds assumptions. Thickness, finite span, angle of attack and interference with the fuselage can all matter. Whitcomb's pressure and wake measurements found that shock-associated changes with sweep did not follow the simple cosine shift exactly.^[ref] The projection itself is exact for the stated vectors; the reduction of a three-dimensional aerodynamic problem to that single component is the approximation.

A supersonic leading edge has an incoming edge-normal flow component exceeding the speed of sound. For a straight planar edge at leading-edge sweep angle ${\Lambda }_{\mathrm{LE}}$ in the convention of normal Mach number for a swept leading edge, the criterion isIt classifies a direction of the incoming velocity, rather than asserting that the same local Mach number holds over the whole aircraft wing.^[ref]

For an original example with $M=2$ and ${\Lambda }_{\mathrm{LE}}=30{}^{\circ }$, $M_n=\sqrt{3}\simeq 1.732$. The condition can persist at larger sweep: at $M=2.2$, even a $60{}^{\circ }$ leading-edge sweep gives $M_n=1.1$: large sweep by itself does not establish a subsonic leading edge.

For $M>1$, the Mach angle is $\mu =\arcsin (1/M)$. On an aft-swept half-wing the edge's angle from the downstream streamwise direction is $\theta =90{}^{\circ }-{\Lambda }_{\mathrm{LE}}$. Thusso the leading edge lies outside the downstream Mach cone from its apex in this ideal geometry. At $M=2$, $\mu =30{}^{\circ }$ whereas the example edge has $\theta =60{}^{\circ }$. Equality is the sonic boundary and belongs to neither strict inequality.

The classification helps select a high-speed flow model. It does not determine shock wave strength, drag or flow separation without the section shape and operating conditions. A measured pressure coefficient distribution or flow visualization can test those additional predictions; naming the regime alone cannot.