Wingtip vortex

A wingtip vortex is a concentrated rotating part of the wake behind a finite lifting wing. Spanwise variation of the wing’s circulation produces trailing vorticity, which can roll up into a strong counter-rotating pair. The two rotating wakes induce downward motion between them and upward motion farther outside. NASA’s account connects the tip-region pressure-driven flow with the pair and its induced change of local flow direction.^[ref]

A useful idealization treats each concentrated wake as a straight line vortex. Outside its core, circular symmetry and the definition of circulation giveFor stipulated $|\Gamma |=20{\mathrm{m}}^2/s$ and $r=0.50\mathrm{m}$, the ideal tangential speed is about $6.37m/s$. The singularity as $r\to 0$ is a defect of the line model: a real vortex has a finite core and a nonuniform vorticity distribution.

Consider an original cross-flow model with cores separated horizontally by $d$, strengths $-\Gamma$ and $+\Gamma$, and orientations chosen to give downwash between them. Each ideal vortex induces downward speed $|\Gamma |/(2\pi d)$ at the other core. At $d=10\mathrm{m}$ and $|\Gamma |=20{\mathrm{m}}^2/s$, this pair-interaction speed is about $0.318m/s$. At the midpoint, adding their two velocities gives $2|\Gamma |/(\pi d)\approx 1.273m/s$ downward. These are distinct locations and distinct speeds.

The wake is not generally two permanently straight tubes with fixed strength. A distributed trailing sheet rolls up, the cores move under induced velocities, and viscosity, turbulence and ambient motion alter the field. A wing’s actual span loading and operating state determine the wake, so the illustrative circulation and core size cannot be assigned to an aircraft merely from its visible span.

The connection to lift-induced drag is the complete induced-flow and load system. A short line sketched at each wingtip is not an extra independent friction force to add to an already complete drag calculation. The flow carries momentum and kinetic energy while changing the force direction experienced by the finite wing.

A proposed laboratory wake survey places a finite wing at a controlled load in a wind tunnel and measures transverse velocity at a downstream plane using calibrated directional probes or timed tracer images. Reverse the sign of lift to check the expected reversal of rotation, and compare measured circulation on several enclosing paths outside the cores. Tracers must follow the flow adequately, while finite sampling, tunnel walls and the probe’s own disturbance limit the inference. A visible tracer pattern alone does not supply the full three-dimensional velocity or pressure field.