 Langmuir adsorption model

Consider an ideal gas in chemical equilibrium with homogeneous, identical adsorption sites at fixed temperature. Each intact molecule occupies one site; only one monolayer is allowed. Occupation of distinct sites is independent: neighboring bound molecules do not change binding or release rates. The simplest Langmuir adsorption model has one adsorbing chemical species, no splitting of molecules, and no competitors. Irving Langmuir's 1918 paper treats simple adsorption alongside more complicated cases; its scope exceeds this particular model.^[ref]

The derivation is a balance between arrivals finding vacancies and departures from occupied adsorption sites. Let $k_{\mathrm{a}}P$ be the arrival-and-binding rate per vacant site and $k_{\mathrm{d}}$ the departure rate per occupied site. Thus $k_{\mathrm{a}}$ has units of inverse pressure per unit time, whereas $k_{\mathrm{d}}$ has units of inverse time. The mean surface coverage obeysAt chemical equilibrium, setting the two terms equal givesThe product $bP$ is dimensionless. Here $P$ is the adsorbing gas's partial pressure, expressed in modern bar, with $1\mathrm{bar}=10^5\mathrm{Pa}$, and $b$ is expressed in ${\mathrm{bar}}^{-1}$. The pascal is the SI unit of pressure. This dimensional $b$ is not itself a dimensionless thermodynamic equilibrium constant. A larger $b$ gives greater surface coverage at the same $P$ and temperature, but does not specify how quickly chemical equilibrium is reached: multiplying both rate coefficients by the same factor leaves $b$ unchanged.

Choose $b=0.5$, $2$, and $8{\mathrm{bar}}^{-1}$ as illustrative parameters at one fixed temperature, without assigning a particular material. At $P=0.5\mathrm{bar}$, substitution gives, respectively,Solving $\theta =1/2$ gives $P_{1/2}=1/b$: the three half-occupation pressures are $2$, $0.5$, and $0.125\mathrm{bar}$. For $b=2{\mathrm{bar}}^{-1}$, reaching $\theta =0.9$ instead requires $bP=9$, or $P=4.5\mathrm{bar}$. If the complete-monolayer capacity is stipulated to be $q_{\mathrm{m}}=10\mathrm{mmol}{\mathrm{g}}^{-1}$, then $q=q_{\mathrm{m}}\theta$ predicts $q=5\mathrm{mmol}{\mathrm{g}}^{-1}$ at $P=0.5\mathrm{bar}$. This last number is an original hypothetical example, not a measured uptake.

The shape follows directly from the finite number of adsorption sites. For $bP\ll 1$, $\theta \approx bP$: nearly every arriving molecule finds a vacancy. For $bP\gg 1$, $1-\theta =1/(1+bP)\approx 1/(bP)$: vacancies become scarce. More formally,Thus surface coverage rises with diminishing slope and approaches one only as $P\to \infty$. This saturation is a site-capacity limit, not a claim that the gas has reached its condensation pressure. A second layer, different site binding strengths, interactions between bound molecules, or a changing surface invalidate parts of the setup. A good fit alone does not establish identical adsorption sites: a restricted pressure range can hide such differences. The Langmuir adsorption model is useful because it makes the capacity and the pressure scale of filling separate, testable quantities.

The Langmuir adsorption model is a theoretical framework used to describe the adsorption of molecules onto solid surfaces. Developed by Irving Langmuir in the 1910s, this model is especially applicable for monolayer adsorption, where it is assumed that adsorption sites on the surface are uniform and that each site can hold only one adsorbate molecule.