 RC low-pass filter

An RC low-pass filter places a resistor $R>0$ between input and output, with a capacitor $C>0$ from output to their common return. The ideal model prescribes the input electric potential difference and leaves the output unloaded. It is a first-order low-pass filter with unit eventual gain.^[ref]

For electrical resistance $R$ and capacitance $C$, Ohm's law gives the electric current through the resistor as $(v_{\mathrm{in}}-v_{\mathrm{out}})/R$. The capacitor relation gives $Cd{v}_{\mathrm{out}}/dt$. Equating them by Kirchhoff's current law yields the ordinary differential equationThe time constant $\tau$ has units of time. A rapid change in electric potential difference requires a large electric current into the capacitor; the finite electrical resistance limits that rate. A slowly maintained voltage instead lets the capacitor approach the input voltage. The same equation therefore predicts both smoothing of sustained oscillations and a rounded response to a sudden change.

For the original constructed example throughout this article, takeThese stipulated ideal values specify an analytical model, rather than measurements of particular components.