 Supersonic leading edge

A supersonic leading edge has an incoming edge-normal flow component exceeding the speed of sound. For a straight planar edge at leading-edge sweep angle ${\Lambda }_{\mathrm{LE}}$ in the convention of normal Mach number for a swept leading edge, the criterion isIt classifies a direction of the incoming velocity, rather than asserting that the same local Mach number holds over the whole aircraft wing.^[ref]

For an original example with $M=2$ and ${\Lambda }_{\mathrm{LE}}=30{}^{\circ }$, $M_n=\sqrt{3}\simeq 1.732$. The condition can persist at larger sweep: at $M=2.2$, even a $60{}^{\circ }$ leading-edge sweep gives $M_n=1.1$: large sweep by itself does not establish a subsonic leading edge.

For $M>1$, the Mach angle is $\mu =\arcsin (1/M)$. On an aft-swept half-wing the edge's angle from the downstream streamwise direction is $\theta =90{}^{\circ }-{\Lambda }_{\mathrm{LE}}$. Thusso the leading edge lies outside the downstream Mach cone from its apex in this ideal geometry. At $M=2$, $\mu =30{}^{\circ }$ whereas the example edge has $\theta =60{}^{\circ }$. Equality is the sonic boundary and belongs to neither strict inequality.

The classification helps select a high-speed flow model. It does not determine shock wave strength, drag or flow separation without the section shape and operating conditions. A measured pressure coefficient distribution or flow visualization can test those additional predictions; naming the regime alone cannot.