 Temperature sensor

A temperature sensor is a sensor whose physical response is used to estimate temperature. A resistance thermometer and a thermistor use changes in electrical resistance; a thermocouple uses the Seebeck effect. The sensor element, its thermal contact and its electrical readout together determine what a temperature measurement means.^[ref]

A contact sensor first responds to its own temperature, which need not immediately equal that of the object or fluid. A useful original lumped thermal model writes the first law of thermodynamics for a sensor with heat capacity $C$, thermal conductance $G$ to an environment at $T_e$, and internal heating power $P$:For constant inputs, its thermal time constant and equilibrium are $\tau =C/G$ and $T_{s,\infty }=T_e+P/G$. The temperature sensor response time and the bias from heating are different properties. Better thermal coupling both shortens $\tau$ and reduces $P/G$ in this model.

Take stipulated values $C=0.020J/K$ and $G=0.010W/K$. Then $\tau =2\mathrm{s}$. With $P=0$ and an environment step from $20$ to $30{}^{\circ }\mathrm{C}$,At $t=2\mathrm{s}$ the sensor reads about $26.32{}^{\circ }\mathrm{C}$, despite a perfect electrical readout. Reaching $90\%$ of the step takes $\tau \ln 10=4.605\mathrm{s}$. A steady $1\mathrm{mW}$ heating input would instead add $0.10\mathrm{K}$ at equilibrium. These are model calculations, not universal sensor specifications.

A proposed two-bath step test of a temperature sensor transfers a small probe between two well-stirred baths with independently established temperatures and records its readout against time. Repeating with a protective sleeve tests the thermal part of the measurement chain. The DOE handbook illustrates insulated sensor elements inside metal sheaths and protective wells; electrical accuracy alone does not describe that complete assembly.^[ref]

Thermal loading by a contact temperature sensor is another limit: a probe exchanges heat with the object and can perturb the quantity it is meant to measure. A small object may require a coupled thermal model rather than a fixed $T_e$. For a resistance thermometer, the excitation also causes Joule heating; checking several currents can distinguish that effect from a fixed readout offset.^[ref]