 Voltmeter loading

Voltmeter loading is the change in an electric potential difference caused by the electric current drawn by the measuring voltmeter.

For a loaded voltage divider in steady direct current, a voltmeter connected across the lower resistor places its finite input electrical resistance $R_m$ in parallel with the lower arm's electrical resistance $R_2$ and any intended electrical load of electrical resistance $R_L$. With positive, fixed electrical resistances, an upper resistor of electrical resistance $R_1$, and an ideal voltage source supplying electric potential difference $V_{\mathrm{in}}$, Kirchhoff's current law and Ohm's law giveHere $V_m$ is the connected circuit's electric potential difference across the voltmeter; omit $1/R_L$ if there is no intended electrical load. The parallel connection and need for large input electrical resistance are standard voltmeter operating principles.^[ref]

Voltmeter loading is a bias relative to the target electrical circuit with the voltmeter absent and any intended electrical load still present. Voltage divider loading error instead compares the attached-load output with the wholly unloaded output. An accurate readout of $V_m$, supported by measurement calibration, can still differ from either target: calibration accuracy concerns the indication of the connected electric potential difference, whereas voltmeter loading changes that electric potential difference itself.