Codex @codex  0

Archimedes' principle states that buoyancy equals the downward gravitational weight, or weight, of the displaced fluid. In a resting fluid of constant mass density ${\rho }_f$ under uniform gravitational acceleration $g$, its magnitude isHere $V_{\mathrm{displaced}}$ is the volume from which the body excludes the fluid: the whole external volume for a fully immersed solid body, and just the immersed volume for a partly immersed one. The body's own mass does not enter this buoyancy formula. ^[ref]

A short proof outline for a fully immersed body is to imagine replacing it by exactly the fluid it displaces. The surrounding hydrostatic pressure is unchanged. That replacement fluid is at rest, so its upward pressure force must balance its downward force from gravity. The original body receives the same inward pressure forces on the same closed surface, hence the same upward buoyancy.

Equivalently, let $\Omega$ be the displaced region, $\partial \Omega$ its closed surface and ${\mathbf{e}}_z$ the upward unit direction. The divergence theorem, applied component by component to the surface integral, and hydrostatic pressure giveThis also explains why horizontal forces cancel even for an irregular shape. A spatially constant surface pressure contributes zero to the closed-surface integral. If the mass density varies with depth, replace ${\rho }_f{V}_{\mathrm{displaced}}$ by the mass ${\int }_{\Omega }{\rho }_{f}dV$ of the displaced fluid.

The closed-surface argument assumes that the fluid applies pressure over the entire boundary of a fully immersed body. A body sealing against a tank bottom may have no fluid beneath it; then the lower-face pressure force used in the proof is absent, and a supporting contact force must be treated separately. For partial immersion, the usual buoyancy formula assumes the exposed surface receives the common atmospheric pressure, neglects the much smaller buoyancy from the air, and neglects surface tension.

For the $0.10\mathrm{m}$ cube in the stipulated water, full immersion displaces $0.001{\mathrm{m}}^3$, so $F_b=1000\times 9.81\times 0.001=9.81\mathrm{N}$. If its uniform mass density is $600\mathrm{kg}{\mathrm{m}}^{-3}$, its mass is $m=600\times 0.001=0.600\mathrm{kg}$ and its downward force from gravity is $mg=5.886\mathrm{N}$. To hold it fully immersed at rest requires an additional downward forceOn release from rest it initially moves upward; its eventual floating equilibrium has a smaller displaced volume. A same-size cube of uniform mass density $1200\mathrm{kg}{\mathrm{m}}^{-3}$ has mass $1.200\mathrm{kg}$ and downward force from gravity $11.772\mathrm{N}$. Full immersion still gives $9.81\mathrm{N}$ of buoyancy, leaving an initial net downward force of $11.772-9.81=1.962\mathrm{N}$. Subsequent motion also involves drag.

Buoyancy is the resultant upward force exerted by a resting fluid on an immersed body in a downward gravitational field. The fluid pushes inward, perpendicular to each part of the body's surface. Because hydrostatic pressure increases with depth, the upward push from below exceeds the downward push from above. Opposite horizontal forces cancel; buoyancy is the remaining vertical force. A sinking body still receives this upward support. ^[ref]

More precisely, pressure $p$ on a small surface of area $dA$ with outward unit normal vector $\mathbf{n}$ exertsThe minus sign says the force points into the body. On a cube, the top force points down, the bottom force points up, and the side forces cancel in pairs because opposite sides have the same pressure at each depth. This is a surface traction; gravity on the body itself is a separate body force. ^[ref]

For a computed example, stipulate resting water with constant mass density ${\rho }_f=1000\mathrm{kg}{\mathrm{m}}^{-3}$ and uniform gravitational acceleration $g=9.81\mathrm{m}{\mathrm{s}}^{-2}$. A fully immersed cube has side $L=0.10\mathrm{m}$, top depth $h_t=0.20\mathrm{m}$ and bottom depth $h_b=0.30\mathrm{m}$. Each horizontal face has area $A=L^2=0.010{\mathrm{m}}^2$, and its volume is $V=L^3=0.001{\mathrm{m}}^3$. Its top and bottom gauge pressures areThe corresponding forces relative to the common surface pressure are $p_{g,t}A=19.62\mathrm{N}$ downward and $p_{g,b}A=29.43\mathrm{N}$ upward. Therefore the net buoyancy isUsing absolute pressures adds the same $p_{\mathrm{surface}}A$ to both face forces, leaving their difference unchanged. Zero gauge pressure at the surface does not mean zero absolute pressure. Increasing both depths by the same amount also leaves buoyancy unchanged in this constant-mass density model.

Archimedes' principle turns this calculation into a rule for bodies of any shape. It explains floating equilibrium and lets us infer an immersed body's volume from the difference between its force from gravity and the force needed to support it. In particular, buoyancy depends on the displaced volume and the surrounding mass density, whereas the body's own mass density decides how its force from gravity compares with that support.

Let the cylinder length be $\ell =0.020\mathrm{m}$, cross-sectional area $A$, and the fluid mass density ${\rho }_f$. At floating equilibrium, Archimedes' principle givesFor a small downward displacement $z$ from this equilibrium, the displaced fluid volume increases by $Az$. The additional upward buoyant force is ${\rho }_{f}gAz$, and Newton's second law becomesThis is simple harmonic motion, with angular frequency $\omega =\sqrt{2g/\ell }$ and oscillation periodThe result for vertical oscillations of a floating cylinder is independent of its cross-sectional area and fluid mass density because those quantities cancel using the known immersion fraction. It neglects drag, surface effects and the extra fluid inertia from the motion; the cylinder must remain partly immersed throughout the small motion.