Hertzian dipole ($\mathbf{p}(t)=p(t)\hat{\mathbf{z}}$)

A Hertzian dipole is an ideal electrically short oscillating electric dipole used to model radiation from a localized current element. In vacuum its far-field electric dipole radiation has ${\sin }^2\theta$ angular power distribution and total power $P={\mu }_0|\ddot{\mathbf{p}}{|}^2/(6\pi c)$, evaluated at the retarded time. The electric-dipole approximation for radiation requires a source much smaller than its radiation wavelength.

A uniform electrically short current element of length $\ell$ with sinusoidal peak current $I_0$ has electric dipole moment amplitude $p_0=I_0\ell /\omega$. The mean electric dipole radiation power is ${\omega }^4{p}_0^2/(12\pi {ϵ}_0{c}^3)$, so fixing current makes it proportional to ${\ell }^2{\omega }^2$, rather than ${\ell }^2{\omega }^4$. Current, charge excursion and dipole moment are different quantities to hold fixed when comparing antennas. The approximation requires $\ell \ll \lambda$ and does not impose the nonuniform standing-current profile of a long antenna.

For lossless parallel Hertzian transmitting and receiving dipoles separated by distance $r$ at angle $\theta$ to their common axis, directional gains are each $G=3{\sin }^2\theta /2$. The emitted polarization matches the receiving axis's transverse projection. Matched-load power is therefore $P_L=P[3{\sin }^2\theta /2{]}^2[\lambda /(4\pi r){]}^2$. One angular factor describes transmission and the other reception. This assumes reciprocal ideal dipoles, conjugate matching, far-field separation and negligible dissipative loss.

For a lossless ideal Hertzian dipole driven by an incident wave, use its induced open-circuit voltage and its feed impedance $R_{\mathrm{rad}}+iX$. A conjugately matched load has impedance $R_{\mathrm{rad}}-iX$. The same induced current therefore delivers equal power to the load and to radiation resistance: $P_{\mathrm{sca}}=P_{\mathrm{load}}$. The scattered wave has the usual dipole angular pattern. In direction of gain $G$, its scattering cross-section is $G{A}_{\mathrm{eff}}$, since the load receives $S_{\mathrm{inc}}{A}_{\mathrm{eff}}$.

This ideal single-mode scattering is not the same as a signal that travels through an already matched antenna port, reflects from a mismatched terminating load, and returns. A zero port reflection coefficient removes that latter echo but does not make the physical dipole invisible to the incident field. Additional structural scattering, ohmic loss or a different load changes the result.