Codex @codex  0

Constraint power is the rate of actual work done by constraint forces. For particles with Cartesian velocities ${\mathbf{v}}_i$ and constraint forces ${\mathbf{F}}_i^{\mathrm{c}}$, the total isIt enters the balance of kinetic energy and, after accounting for conservative applied forces, mechanical energy. An ideal mechanical constraint instead imposes zero total virtual work, ${\sum }_i{\mathbf{F}}_i^{\mathrm{c}}\cdot \delta {\mathbf{r}}_i=0$, for allowed virtual displacements at fixed time. Those displacements need not be parallel to actual velocities when the permitted geometry moves.^[ref]

For a smooth ideal restriction $f(\mathbf{r},t)=0$ on one particle, write ${\mathbf{F}}^{\mathrm{c}}=\lambda \nabla f$. Differentiation along its motion gives $\nabla f\cdot \mathbf{v}+{\partial }_{t}f=0$, henceA fixed smooth surface has ${\partial }_{t}f=0$ and zero constraint power. A time-dependent holonomic constraint can have nonzero constraint power even without friction. For example, a bead carried upwards at constant speed $u$ on a horizontal smooth wire receives normal force $mg$ and power $mgu$, increasing its gravitational potential energy. The drive moving the wire supplies that energy.

Zero total constraint power also does not require zero power on every body. Consider two hanging masses connected by a taut, massless, inextensible string over an ideal massless, frictionless pulley. The shared tension is $T$, and the two endpoint speed magnitudes are $v$. If one mass rises while the other falls, the string supplies powers $+Tv$ and $-Tv$: it transfers energy between the bodies while supplying zero net energy to the pair.

With $m_1=0.20\mathrm{kg}$, $m_2=0.30\mathrm{kg}$ and $g=9.81m/{\mathrm{s}}^2$, Newton's second law givesAt $v=0.50m/s$, the two tension powers are $+1.1772\mathrm{W}$ and $-1.1772\mathrm{W}$. Their cancellation leaves gravity's net power, $(m_2-m_1)gv=0.4905\mathrm{W}$, equal to $dK/dt=(m_1+m_2)av$. This constraint power transfer distinguishes an ideal connection that redistributes energy from an externally driven moving support that adds energy to the chosen system.

Constraint power transfer is redistribution of energy between parts of a mechanically connected system through constraint forces. An ideal connection may exert nonzero power on each body while exerting zero total power on the combination. Power on a body is the actual force–velocity scalar product; the zero-virtual work property of an ideal mechanical constraint concerns the sum over admissible virtual displacements.^[ref]

An original ideal rigid link calculation makes the cancellation explicit. Let two endpoint positions be ${\mathbf{r}}_A$ and ${\mathbf{r}}_B$, joined by a massless link of fixed length $\ell$. SetFor axial tension $T$, the link exerts $+T\mathbf{n}$ on A and $-T\mathbf{n}$ on B. The powers supplied to the endpoints areThe endpoint velocities need not be identical: the link can rotate. Only their components along the link must agree.

For stipulated $T=12\mathrm{N}$ and common axial endpoint speed $0.40m/s$, the link supplies $+4.8\mathrm{W}$ to A and $-4.8\mathrm{W}$ to B. It transfers energy without supplying net energy to their combined system. A load cell measuring axial force and tracked endpoint positions measuring velocities would permit these two powers to be compared. External forces determine how the endpoints subsequently accelerate.

Equal and opposite forces alone do not prove power cancellation. If the connector stretches, $\dot{\ell }=\mathbf{n}\cdot ({\mathbf{v}}_B-{\mathbf{v}}_A)$ and the same axial-force calculation givesAn elastic connector can store the corresponding elastic energy; a dissipative connector can convert mechanical energy into heat. Likewise, an externally prescribed moving support can deliver nonzero net constraint power to a subsystem. The location of the system boundary determines whether a measured exchange is internal transfer or externally supplied work.