Conversion of an iron-bearing ore into metallic iron, for example by carbon monoxide reduction in a blast furnace.
Iron ore is naturally occurring material from which iron can be extracted under the relevant technical and economic conditions. Important iron-bearing minerals include hematite, , and magnetite, . Real ore also contains other minerals, so its composition differs from that of a pure iron oxide.[ref]
Iron Ore by South Australia Energy and Mining. South Australian government, iron-ore minerals and uses
Using approximate atomic masses, pure hematite contains iron by mass. This is a mineral-composition calculation, not the grade of every ore deposit. Beneficiation, transport and removal of oxygen and unwanted constituents all influence whether a deposit is a useful feed for iron extraction.
Direct reduced iron is metallic iron produced by removing chemically bound oxygen from iron ore without melting the iron. Its porous structure gives rise to the name sponge iron. Gas-based processes can use hydrogen and carbon monoxide as reducing agents; the product can subsequently be melted during steelmaking.[ref]
Direct Reduced Iron by Midrex Technologies. Process developer, solid-state oxygen removal and steelmaking feed
For the idealized hydrogen reaction , the removed oxygen leaves in water. This reaction changes the direct chemical product relative to a carbon-based reduction, but the full environmental comparison also depends on how the hydrogen, process heat and electricity are supplied. Solid-state reduction and final steel melting remain distinct operations.
The carbon-rich first molten iron product of traditional blast furnace smelting, also containing other feed-dependent impurities.
A blast furnace is a shaft furnace in which a descending solid charge encounters rising hot gases. In iron extraction, the charge includes iron ore, coke and a flux such as limestone. The products include molten pig iron and slag, which separates from the metallic liquid.[ref]
Steel Production by the American Iron and Steel Institute. How Steel Is Made: blast-furnace feed and pig-iron output
The gases supply both heat and a reducing environment. A simplified iron oxide reduction isHere carbon monoxide removes oxygen from the iron oxide and becomes carbon dioxide. The opposing flows allow rising gases to heat and react with incoming material before leaving the furnace: countercurrent flow helps recover energy within the process. The pig iron contains substantial carbon and requires further refining for most steelmaking.
Articles by others on the same topic
There are currently no matching articles.