Blast furnace Created 2026-10-31 Updated 2026-11-05
A blast furnace is a shaft furnace in which a descending solid charge encounters rising hot gases. In iron extraction, the charge includes iron ore, coke and a flux such as limestone. The products include molten pig iron and slag, which separates from the metallic liquid.[ref]
The gases supply both heat and a reducing environment. A simplified iron oxide reduction is
Here carbon monoxide removes oxygen from the iron oxide and becomes carbon dioxide. The opposing flows allow rising gases to heat and react with incoming material before leaving the furnace: countercurrent flow helps recover energy within the process. The pig iron contains substantial carbon and requires further refining for most steelmaking.
Extractive metallurgy 2026-11-05
Extractive metallurgy develops processes for separating useful metals from ores and refining them to a required purity. A process may combine physical concentration, high-temperature reactions, dissolution and electrochemical recovery. The appropriate route depends on the mineral's chemical composition, the metal's reactivity and the fate of unwanted constituents.
For iron extraction, an iron oxide must lose oxygen. In a simplified reaction, , carbon monoxide is the reducing agent. Separating the resulting iron from slag and controlling remaining impurities are further tasks. Extraction is therefore a sequence of reaction and separation steps, rather than just melting the original rock.[ref]
Iron ore 2026-11-05
Iron ore is naturally occurring material from which iron can be extracted under the relevant technical and economic conditions. Important iron-bearing minerals include hematite, , and magnetite, . Real ore also contains other minerals, so its composition differs from that of a pure iron oxide.[ref]
Using approximate atomic masses, pure hematite contains iron by mass. This is a mineral-composition calculation, not the grade of every ore deposit. Beneficiation, transport and removal of oxygen and unwanted constituents all influence whether a deposit is a useful feed for iron extraction.
Steelmaking Created 2026-10-31 Updated 2026-11-05
Steelmaking produces steel by controlling the carbon content, other alloying elements and unwanted constituents of iron. A blast furnace first produces carbon-rich pig iron; a basic oxygen furnace then refines the molten material by oxidation and composition adjustment. An electric arc furnace instead supplies heat electrically to melt a charge that can include recycled steel, direct reduced iron and pig iron.[ref]
The distinction between iron extraction and steelmaking matters: converting an iron oxide to metallic iron and adjusting an existing iron-based alloy to the required composition are different tasks. The Bessemer process is an important historical example of refining pig iron by an air blast; modern basic oxygen steelmaking uses an oxygen supply rather than ordinary air.