Verified locator: Molecule of the Week, 17 October 2022. Official ACS structural account identifies condensation of ethylene glycol and terephthalic acid. Repeat atom counts and finite-chain examples are explicitly derived in the article.
Primary collaborative NIST/NASA benchmark dataset README. Challenge Summary: laser-powder-bed-fusion titanium specimens underwent two heat-treatment conditions, machining/polishing and fully reversed four-point rotating-bending testing. Fatigue Testing specifies a 100 Hz ADMET eXpert 9313 apparatus and stress ratio minus one. Used for experimental arrangement, not to infer an allowable shaft stress or a lifetime for other materials.
Author account: www.technagroup.it/data/image/pdf/Forum_2004/009-023_The_Story_of_Bioglass.pdf . Byline Larry Hench, Imperial College. Printed pp. 9–23 in Lessons in Nanotechnology from Traditional and Advanced Ceramics; first-page copyright 2005. Locators pp. 10–12, implant observations and original collaborators; pp. 13–14, proposed interfacial reaction sequence. The path contains Forum_2004; it is not taken as the publication year.
Official primary resource: www.fda.gov/medical-devices/biocompatibility-assessment-resource-center/basics-biocompatibility-information-needed-assessment-fda . Locators: How the FDA Assesses or Evaluates Biocompatibility, concerning final finished form, processing and residuals; Biocompatibility Factors of Interest to the FDA, concerning nature, type, frequency and duration of contact. Companion endpoint tables: www.fda.gov/medical-devices/biocompatibility-assessment-resource-center/biocompatibility-evaluation-endpoints-device-category . These are evaluation principles, not a universal requirement to perform every listed test.
Professional-society profile: live.fems.org/professor-tw-bill-clyne . Locators: biography paragraph identifying the 1999 Cambridge chair in Mechanics of Materials, research on thermo-mechanics of composites and coatings, educational software and DoITPoMS. The profile explicitly connects the published TW initials with Bill; no further expansion of those initials is made.
Primary guide: www.matter.org.uk/matscicdrom/manual/MatSciCDROMv21_UserGuideSections1and2.pdf . Version 2.1. Printed p. 4 lists the MATTER Design and Development Team, including Boban Tanovic, and Academic Contributors, including Bill Clyne of Cambridge. The guide describes the interactive teaching modules and their use alongside materials-science instruction.
Primary publisher abstract: doi.org/10.1002/jbm.820050611 . Journal of Biomedical Materials Research 5(6), 117–141 (November 1971). Verified byline: L. L. Hench, R. J. Splinter, W. C. Allen and T. K. Greenlee; initials retained. The abstract compares in-vitro glass-ceramic solubility and interfacial hydroxyapatite crystallization studies with in-vivo rat-femur implant histology and ultrastructure.
Primary teaching resource: www.matter.org.uk/matscicdrom/manual/co.html . Materials Science on CD-ROM, version 2.1. The page credits Bill Clyne, University of Cambridge, and Boban Tanovic, MATTER. Locators: Load Transfer, What happens when a Composite is Stressed? (equal strain); What about the Transverse Stiffness? and Figure 2 (equal-stress slab model, Reuss estimate, and limitations for real fibre geometry).
Official Bioengineering profile. Education lists University of Michigan degrees: BS in Materials Science and Engineering (1994), MS and PhD in Biomedical Engineering (2003), followed by a University of Washington postdoctoral fellowship (2006). Research Interests includes biomaterials, cell/tissue mechanics and device design; the profile supplies the external portrait used in Rupak M. Rajachar.
Official Biomedical Engineering faculty profile. Research Interests describes biomimetics, the relation between mineralized-tissue organization and mechanical properties, and biomineralization-inspired materials. Research Areas includes biomechanics and biomaterials. The profile links the external portrait used in David H. Kohn.
Institutional tutorial issued by the School of Materials Science and Engineering, UNSW Sydney. Distinguishes continuous and discontinuous reinforcement and explains the directional strength of aligned fibres. No personal author or publication date is inferred.
Original 1972 thesis, University of Missouri-Rolla. Its abstract reports a pure-nickel lattice parameter of at , from X-ray measurements: scholarsmine.mst.edu/masters_theses/5049/ .
Second edition, volume1, 1963. The magnesium parameters reproduced in Crystallography Open Database entry9008506 are and : www.crystallography.net/cod/9008506.html . These independently documented values do not identify which data-book edition accompanied an examination.
Author-maintained online text: solidmechanics.org . Section3.12 discusses single-crystal plasticity, tensile-axis rotation and the relationship between secondary slip and hardening: solidmechanics.org/Text/Chapter3_12/Chapter3_12.htm
Primary casting experiments comparing selector geometry, with optical microscopy and electron-backscatter diffraction used to track surviving crystal grain orientations; Materials 12, 789. doi.org/10.3390/ma12050789
Cambridge institutional account with a transmission-electron micrograph supplied by Yanhui Zhang, showing paired dislocation loops after creep testing. It explains order restoration by two matrix dislocations. brearley.msm.cam.ac.uk/2002/Zhang.html
Primary measurements of dielectric response, spontaneous polarization and optical properties of melt-grown single-domain crystals; Journal of Physics and Chemistry of Solids 29, 1797–1803. doi.org/10.1016/0022-3697(68)90164-9
Manufacturer manual. Sections 3.5 and 7.1 describe the coupled crystal/detector geometry; section 4.6 gives the copper characteristic wavelengths. community.wvu.edu/~miholcomb/New%2C%20TEL-X-Ometer_Manual_V1.0.1.pdf
Primary in-situ synchrotron diffraction measurements during stress-jump creep tests of a rafted AM1 single crystal; Materials 11, 1527. doi.org/10.3390/ma11091527
The inspected official PDF identifies itself as a book for Engineering Tripos materials courses. Printed p.6 gives fracture-mechanics formulas. It has not been established as the Data Book supplied for the2018NSTMaterials examination, so its generic material ranges must not be presented as exact historical exam values.
Journal of Nuclear Materials 367–370, pp.954–959. The official laboratory abstract describes pressurized-tube measurements separating irradiation creep, void swelling, precipitation and plastic strain. The source's full title continues “Irradiated as Pressurized Tubes in the EBR-II Fast Reactor”.
An official technical note explaining Charpy impact test transition curves. Section2 describes absorbed energy, lateral expansion and fracture-appearance measures of the ductile-to-brittle transition.
Nature 211, pp.291–292. The accessible abstract discusses reduced high-temperature ductility, thin-foil observations of bubbles and a helium embrittlement mechanism involving grain boundaries. The abstract was inspected; the subscription-only full article was not required for the stated claim.
www.energy.gov/ne/articles/doe-awards-111-million-us-vendors-develop-accident-tolerant-nuclear-fuels
Program announcement describing development of doped oxide, silicide and alternative cladding concepts with work planned through 2021.
NRC discussion of high-burnup fuel damage and the established peak-cladding-temperature and oxidation criteria.
Journal of Nuclear Materials 47, 187–197. The abstract describes autoradiographs of RAPSODIE-irradiated pins and effects of thermal diffusion, evaporation–condensation and oxygen chemistry.
Atomistic construction and relaxation of several loop types in zirconium, examining orientation, energy and shape.
Nature 216, 575–576. The opening description identifies Dounreay-irradiated type316 specimens and thin-foil electron microscopy.
The course examples connect material performance index values to materials selection charts; the shaft and flywheel examples identify carbon-fibre-reinforced polymers among candidates with high specific strength. Their numerical properties concern specified examples and should not be treated as universal beam compression allowables.
Articles by others on the same topic
There are currently no matching articles.