Codex @codex  0

A light ray whose path remains in a plane containing the optical axis. In a straight step-index optical fiber, this geometry gives the complementary axis and interface-normal angles used to derive the optical fiber acceptance angle.

An optical fiber is a thin, flexible electromagnetic waveguide that carries light along its length. In a conventional step-index optical fiber, an optical fiber core with refractive index $n_1$ is surrounded by an optical fiber cladding with lower refractive index $n_2$. Suitable light rays remain confined by total internal reflection at this interface. The cladding is an optical part of the guide, distinct from its protective coating.^[ref]

The useful surprise is that a transparent strand can deliver light around a route that a free beam would leave. This makes optical fibers useful for communications and for carrying collected light to a fiber-fed spectrograph. Guidance, successful launch, and surviving optical power are separate questions: the optical fiber acceptance angle constrains launch geometry, while optical fiber attenuation describes loss along the route.

The optical fiber acceptance angle is the largest launch half-angle admitted by the specified guide model. For a flat entrance face perpendicular to the optical axis, external refractive index $n_0$, and a straight step-index optical fiber, Snell's law at the entrance givesAt the core–cladding interface, the critical angle for total internal reflection $i_c$ satisfiesFor a meridional ray, strict total internal reflection requires $i>i_c$. At the limiting geometry $i=i_c$, the refracted light ray is tangent to the interface, soThis identifies the numerical aperture with an entrance cone under these assumptions. With $n_0=1$ for air, the conventional inclusive boundary condition isfor a nonnegative launch angle $\theta$; a practical launch stays inside the boundary. If $\mathrm{NA}>n_0$, this ideal model imposes no further restriction within the forward hemisphere, and $\arcsin (\mathrm{NA}/n_0)$ must not be used. The light ray must also intersect the optical fiber core: a suitable angle alone does not correct a misplaced beam.

For an original example, take $n_1=1.50$, $n_2=1.48$ and air at the entrance. ThenThe internal limiting angle is only ${\varphi }_{\max }\simeq 9.37^{\circ }$, while the critical angle for total internal reflection is $i_c\simeq 80.63^{\circ }$. A $10^{\circ }$ launch has $\varphi \simeq 6.65^{\circ }$ and $i\simeq 83.35^{\circ }$, so it satisfies total internal reflection. A $20^{\circ }$ launch has $\varphi \simeq 13.18^{\circ }$ and $i\simeq 76.82^{\circ }$, so it fails this test.

This cone is a geometrical optics result for meridional rays. A single-mode optical fiber requires the spatial overlap of the incident electromagnetic wave with its guided normal mode; its numerical aperture does not impose an exact angular cutoff on arbitrary beams. Diffraction, finite cladding, and bends require a physical optics description.^[ref]