Polymer recovery accounting basis

A polymer recovery accounting basis specifies the conserved inventory used to compare initial material with recovered fractions. Possible choices include conditioned dry mass, original repeat-unit equivalents or the amount of a particular element. These bases coincide only under suitable chemical and sampling assumptions. A polymer fraction-recovery balance needs that convention before its recovery percentage has a clear meaning.

For fractions $i$ with measured masses $m_i$, suppose $k_i$ converts one unit of that product mass into the chosen original-material equivalent. Recovery on that basis iswhere $B_0$ is the initial inventory in the same units. Taking every $k_i=1$ is a chemical assumption: it requires that the measured masses are directly comparable. Different solvent contents, water incorporated by reaction, salts, fillers or filter residues can invalidate it.

An original polyglycolic acid example makes the distinction visible. Ignoring initial end-group contributions for a repeat-unit bookkeeping comparison, one millimole of ${\mathrm{C}}_2{\mathrm{H}}_2{\mathrm{O}}_2$ repeat inventory represents approximately 58.04 mg. Complete ester hydrolysis to one millimole of glycolic acid, ${\mathrm{C}}_2{\mathrm{H}}_4{\mathrm{O}}_3$, gives approximately 76.05 mg. The roughly 18.01 mg difference comes from incorporated water, not extra recovered original repeat inventory. The manufacturer's structural and decomposition diagrams identify the polymer and hydrolysis product.^[ref]

Dividing the product's 76.05 mg directly by 58.04 mg would report approximately 131.0% recovery on mixed bases. The monomer-to-original-repeat conversion is instead $k=58.04/76.05\approx 0.76318$, restoring 58.04 mg of original repeat equivalents. Exact finite-chain accounting must include the original end groups and count hydrolyzed bonds; the repeat-unit example deliberately omits that small-chain correction. Soluble oligomers contain a different number of end groups per repeat, so the monomer conversion is not universal for an unidentified soluble mixture.

Carbon-basis closure for polymer degradation offers another explicit inventory. Each repeat and each glycolic-acid molecule has two carbon atoms, so the example contains approximately 24.02 mg of carbon before and after the specified hydrolysis. If subsequent chemistry produces other carbon-containing products, those products belong in that inventory too. Carbon introduced by solvent or background contamination must be distinguished from specimen carbon; otherwise elemental closure can look satisfactory for the wrong reason.

An original fraction count begins with 1.00 mmol of repeat equivalents and recovers 0.60 mmol in the solid, 0.30 mmol in identified soluble material and 0.05 mmol in rinses. Recovery is 95%, regardless of whether the corresponding product masses differ through hydration. The remaining 0.05 mmol is unaccounted on this basis; the deficit alone does not establish whether it was chemically transformed, escaped collection or was underestimated analytically.

A useful experiment records conditioning and drying, collects filtrate and rinses, identifies the soluble products and measures blanks. Kureha's published test uses filtered, dried residue after timed exposure of material at 2% solids concentration to deionized water.^[ref] That retained-residue mass is one well-defined observable. Inferring the full chemical recovery requires the other fractions and their conversion factors. Report those assumptions separately from the molar mass distribution of whichever fraction was analyzed.

Carbon-basis closure for polymer degradation compares the amount of carbon initially introduced in a polymer with the carbon recovered in all measured products and residues. It avoids confusing incorporated water with recovered original polymer mass, while requiring dissolved and gaseous products to be counted as well as retained solids.

On a consistent specimen-carbon basis, writeThe measured recovery is the sum of the first four terms divided by $C_0$. Specify whether each $C$ denotes carbon mass or amount of substance; numerator and denominator must use the same units. Carbon from medium, inoculum, solvent or contamination must be separated from specimen-derived carbon.

An original polyglycolic acid example begins with one millimole of repeat-unit inventory, containing two millimoles of carbon atoms, approximately 24.02 mg of carbon. Hydrolysis to one millimole of glycolic acid preserves those carbon atoms while incorporating water. The product's larger total mass is therefore not extra carbon recovery. The manufacturer's repeat structure and decomposition diagram identify that chemical relationship.^[ref]

If some products become carbon dioxide, convert measured gas mass to carbon mass before adding it to residue carbon:For an illustrative initial 24 mg of carbon, suppose corrected measurements recover 12 mg in solid, 6 mg dissolved and approximately 3 mg in carbon dioxide. Recovery is $21/24=87.5\%$, leaving 3 mg unaccounted. Approximately 11 mg of carbon dioxide contains 3 mg of carbon; adding that full gas mass to solid and dissolved carbon would mix bases.

A concrete primary apparatus is the OECD 301 B carbon-dioxide evolution test. It aerates inoculated mineral medium with carbon-dioxide-free air at a controlled rate, traps evolved gas in barium or sodium hydroxide, and determines it by titration or inorganic-carbon measurement. Blank inoculum contributions are subtracted.^[ref] These operations explain why inlet scrubbing, gas collection and blank correction belong to the measurement rather than being optional bookkeeping.

The guideline is a chemical biodegradability test, not proof that every polymer shape or formulation meets its applicability conditions. Its general section requires attention to solubility, volatility, adsorption and composition.^[ref] Use those conditions when adapting a collection experiment to a particular specimen.

Blank-corrected carbon recovery in polymer tests also needs uncertainty in the background subtraction. Carbon missing from the liquid can have moved to surfaces or gas without being completely converted to carbon dioxide. Conversely, carbon dioxide production establishes conversion of some carbon but does not measure the remaining chain-length distribution. Report closure, identified chemical products and the molar mass distribution as different results; a successful elemental balance alone does not determine the degradation mechanism.

Blank-corrected carbon recovery in polymer tests subtracts measured background carbon from a specimen-containing experiment before comparing recovered carbon with the specimen's initial inventory. It is a carbon-basis closure for polymer degradation calculation with an explicit background model. Uncertainty in that subtraction and differences between blank and specimen conditions both affect the result.

For total measured carbon $T$, mean blank carbon $\overline{B}$ and initial specimen carbon $C_0$, writeAll terms must use the same carbon-mass or carbon-amount basis. For independent $T$ and $\overline{B}$, $u^2(Q)=u^2(T)+u^2(\overline{B})$; a shared correction can instead introduce covariance. Uncertainty in $C_0$ also enters the recovery ratio. The GUM's correlated-input rule supplies the general propagation framework.^[ref]

An original numerical example measures $T=10$ mg of carbon, with standard uncertainty 0.5 mg. Three independent blank runs give 2, 4 and 6 mg. Their mean is 4 mg, sample standard deviation is 2 mg and estimated standard uncertainty of the mean is $2/\sqrt{3}\approx 1.155$ mg. Net carbon is therefore 6 mg with standard uncertaintyWith stipulated exact $C_0=24$ mg, recovery is 25%, with standard uncertainty approximately 5.24 percentage points. A precise total measurement can still leave a relatively uncertain net result after subtraction.

Shared-blank covariance in carbon recovery matters if the same estimated blank corrects several specimens. With independent specimen totals $T_i$, each corrected quantity is $Q_i=T_i-\overline{B}$, soFor four specimen totals each having the 0.5 mg standard uncertainty above, averaging the corrected values gives variance $0.25/4+4/3\approx 1.396\mathrm{m}{\mathrm{g}}^2$. Treating all four corrected values as independent would incorrectly divide the shared blank contribution by four. Taking more specimen readings does not recreate independent blank information.

The OECD 301 B apparatus aerates inoculated medium with carbon-dioxide-free air and measures evolved gas captured in hydroxide traps. Its measured carbon dioxide is corrected for blank inoculum production.^[ref] Use matched collection duration, volume and analytical conversion when comparing blanks and specimen vessels; a gas-mass reading must be converted to carbon mass before mixing it with other carbon fractions.

A blank is not guaranteed to reproduce every background process inside the treated vessel. The guideline explicitly notes that endogenous activity in the presence of the test chemical may differ from that in the blank control.^[ref] Replication estimates scatter around the blank model; it does not prove additivity. Report the blank design, correction, uncertainty and any evidence for altered background activity alongside the final recovery.

Shared-blank covariance in carbon recovery is the statistical dependence between net-carbon results that subtract the same estimated background. Independent specimen measurements can become correlated through that common subtraction. The covariance matters when averaging results, comparing specimens or deciding how much effort to allocate to blank measurements.

Let $Q_i=T_i-\overline{B}$, with independent specimen totals $T_i$ and a shared blank estimate independent of those totals. ThenHere $u_B$ is the standard uncertainty of the blank estimate. The added matrix term represents one shared random quantity, not a separate new blank error for each specimen. Common-reference covariance is explicitly retained in the GUM.^[ref]

For a weighted mean with ${\sum }_i{w}_i=1$,The specimen terms can decrease through averaging, but the shared blank term remains. With independent unequal specimen uncertainties, the minimum-variance weights remain proportional to $1/u_{T_i}^2$ under this particular common-additive model; the common term does not depend on the normalized weights.

A contrast behaves differently: $Q_i-Q_j=T_i-T_j$, so the same blank cancels exactly. This cancellation requires the identical additive correction on the same carbon basis. Different blank batches, collection durations or conversion factors need not cancel. Dividing each result by a different uncertain initial carbon inventory adds another measurement layer.

An original planning example chooses $n_T$ specimen-total measurements and $n_B$ independent blank measurements, with fixed total count $N=n_T+n_B$. If individual standard deviations are ${\sigma }_T,{\sigma }_B$, the net mean has varianceA continuous minimum at equal cost satisfies $n_T/n_B={\sigma }_T/{\sigma }_B$. With stipulated $N=12$, ${\sigma }_T=1$ mg and ${\sigma }_B=2$ mg, four specimen measurements and eight blanks give variance $0.75\mathrm{m}{\mathrm{g}}^2$. Ten specimen measurements and two blanks give $2.1\mathrm{m}{\mathrm{g}}^2$. More specimen readings alone can therefore be a poor allocation. Blank-allocation design for carbon recovery also needs actual preparation costs and biological independence.

The OECD carbon-dioxide evolution test measures gas production relative to inoculum blanks, but notes that endogenous activity with a test chemical may differ from the control.^[ref] Replication estimates random variation under the chosen background model. It cannot establish that the treated system's background is exactly additive. Preserve the experimental blank lineage and distinguish sampling uncertainty from a possible change in the background process.

Blank-allocation design for carbon recovery chooses how many specimen and blank measurements to make under a stated cost and uncertainty model. Because a shared blank affects all corrected results, additional specimen readings alone can leave the dominant uncertainty unchanged. The design objective should explicitly include the blank estimate.

For independent specimen totals with individual standard deviation ${\sigma }_T$ and blanks with standard deviation ${\sigma }_B$, estimate a net mean by $\overline{T}-\overline{B}$. Its variance isLet each specimen measurement cost $c_T$ and each blank cost $c_B$, with budget $C=c_T{n}_T+c_B{n}_B$. An original continuous optimization using a Lagrange multiplier givesThese formulas assume positive counts, independent observations and known planning variances. Integer counts and minimum replication constraints still require checking.

For stipulated ${\sigma }_T=1$ mg, ${\sigma }_B=2$ mg, specimen cost 3 minutes, blank cost 1 minute and budget 60 minutes, a feasible design uses nine specimen measurements and thirty-three blanks. It costs exactly 60 minutes and gives variance $1/9+4/33\approx 0.2323\mathrm{m}{\mathrm{g}}^2$. Eighteen specimen measurements and six blanks also fit the budget but give approximately $0.7222\mathrm{m}{\mathrm{g}}^2$. The more specimen-heavy design is less precise in this model.

The optimization concerns precision, not proof that background subtraction is unbiased. OECD's carbon-dioxide evolution method uses inoculum blanks, while its general principles note that endogenous activity with the test chemical may differ from the blank control.^[ref] More blanks estimate their own mean more precisely without establishing perfect additivity.

Batch-specific blank allocation is important when preparation day, medium or collection time changes the background. Pooling all blanks into one common estimate can be inappropriate if the specimen groups do not share that background. Conversely, treating one reused blank estimate as independent for every specimen discards the shared-blank covariance in carbon recovery.

A practical planning study therefore records the independent experimental unit, actual preparation costs, temporal grouping and pilot variance uncertainty. The GUM's treatment of correlated inputs supplies the framework for retaining common corrections.^[ref] Evaluate feasible designs under plausible alternative variance components rather than reporting a continuous optimum as a universal replication requirement.

Batch-specific blank allocation assigns background controls to the specimen groups whose preparation conditions they actually represent. In an experiment on blank-corrected carbon recovery in polymer tests, a batch may share inoculum, medium, collection time or reagent preparation. A precisely measured blank from another batch can still be the wrong correction. OECD's test framework uses parallel inoculum controls and warns that endogenous activity with a test substance need not equal the control's activity.^[ref]

For an original independent-batch model, estimate a weighted net mean byThe weights specify the scientific target; they are not automatically the observed fractions of specimens. Within a batch, reusing its blank estimate creates the shared-blank covariance in carbon recovery. Common corrections across batches require additional covariance terms rather than the independence assumed here.^[ref]

If specimen counts are fixed and each blank costs the same, minimizing the remaining variance under a total blank-count budget gives $n_{B,b}\propto |w_b|{\sigma }_{B,b}$. Consider two batches with weights $0.8,0.2$, ten specimen readings each, specimen standard deviation 1 mg, blank standard deviation 2 mg and twelve blank readings available. Ten blanks in the first batch and two in the second give variance $0.64(0.1+4/10)+0.04(0.1+4/2)=0.404\mathrm{m}{\mathrm{g}}^2$. Splitting blanks six and six gives approximately $0.5213\mathrm{m}{\mathrm{g}}^2$. These stipulated numbers illustrate allocation; integer and minimum-replication constraints still apply.

Batch-matched blank weighting also controls bias. If batch backgrounds are 1 and 5 mg, their scientifically weighted background is $0.8(1)+0.2(5)=1.8$ mg. Subtracting an equally pooled blank mean of 3 mg instead biases that weighted net result downward by 1.2 mg. Extra replication of the pooled estimate does not remove this mismatch.

Record batch membership and independent preparations before deciding which blanks to pool. Allocation can reduce sampling variance; it cannot prove that a background correction is chemically additive.

Batch-matched blank weighting applies background corrections in the same proportions as the specimen results they correct. It concerns the definition of the target mean as well as the precision of the blank measurements. An experiment on blank-corrected carbon recovery in polymer tests can have different backgrounds across preparation batches even when every batch follows the same nominal procedure.

For an original additive model, let $T_b={\mu }_b+{\beta }_b+{ϵ}_b$ be a batch specimen mean and $B_b={\beta }_b+{\eta }_b$ its blank mean, with zero-mean measurement errors. The desired scientific target is $\mu ={\sum }_b{w}_b{\mu }_b$, where ${\sum }_b{w}_b=1$. If specimen means use $w_b$ but blanks use different weights $a_b$, the estimatorhas bias ${\sum }_b(w_b-a_b){\beta }_b$. Matching $a_b=w_b$ removes that bias for arbitrary batch backgrounds in this model. Pooling can remain unbiased under an additional justified common-background assumption, but that is a different model.

For stipulated backgrounds 2 and 8 mg and target weights 0.75 and 0.25, the relevant correction is 3.5 mg. An equally weighted pooled correction is 5 mg and biases the net mean downward by 1.5 mg. Dividing that net result by a fixed 50 mg initial-carbon amount shifts the recovery fraction by $-1.5/50=-0.03$, or three percentage points. These are constructed examples, not OECD test results.

With independent specimen and blank estimates, variance propagation gives $\mathrm{Var}(\hat{\mu })={\sum }_b{w}_b^2\mathrm{Var}(T_b)+{\sum }_b{a}_b^2\mathrm{Var}(B_b)$. Common reference measurements require covariance terms as well.^[ref] Changing weights to reduce variance can change the target or introduce bias; it is not automatically an improvement.

Transporting blank corrections between batches requires evidence that their backgrounds are exchangeable for the intended correction. OECD's general principle already cautions that endogenous activity with a test chemical need not match the inoculum control.^[ref] Matching batch weights repairs an aggregation error; it does not establish chemical additivity. State the target population, batch labels, normalization amounts and pooling assumptions before deciding which measurements share a correction.

Transporting blank corrections between batches uses background measurements from one preparation or acquisition group to correct another. The transfer requires a justified relation between their backgrounds; sharing a nominal protocol does not by itself establish equality. In blank-corrected carbon recovery in polymer tests, OECD's general principle warns that endogenous activity with a test substance need not match its blank control.^[ref]

An original additive model writes a target specimen reading as $T_b={\mu }_b+{\beta }_b+{ϵ}_b$ and a source-batch blank as $B_a={\beta }_a+{\eta }_a$. Let ${\Delta }_{ba}={\beta }_b-{\beta }_a$. A transferred correction isIgnoring the shift biases the result by ${\beta }_b-{\beta }_a$. For stipulated specimen reading 18 mg, source background 2 mg and target background 5 mg, direct source-blank subtraction gives 16 mg instead of 13 mg. A precisely measured source blank does not eliminate this three-milligram mismatch.

Transfer uncertainty must also be retained. Under independent errors with standard uncertainties $u(T_b)=1$ mg, $u(B_a)=0.5$ mg and $u({\hat{\Delta }}_{ba})=2$ mg, the corrected result has uncertainty $\sqrt{1+0.25+4}\approx 2.29$ mg. Omitting the transfer term gives only 1.12 mg. These chosen values illustrate the measurement model, not observed test performance. The GUM requires significant correction and influence quantities to be included rather than treating the functional relationship as just a numerical formula.^[ref]

Shared-reference cancellation in transferred blank corrections is a complementary warning. If the estimated shift is literally ${\hat{\Delta }}_{ba}=B_b-B_a$, then $T_b-B_a-(B_b-B_a)=T_b-B_b$. The source blank cancels. Treating $B_a$ and this shift as independent would double-count uncertainty; their covariance contains the cancellation.^[ref]

A transfer study can pair blanks across preparation conditions, quantify a reproducible shift and test whether it depends on collection time or material. Such evidence supports a specified transfer model. It does not prove that a blank remains chemically additive in the presence of the specimen.

Shared-reference cancellation in transferred blank corrections occurs when the same numerical reference enters a correction with opposite coefficients. It is an algebraic property of the measurement equation. Its uncertainty counterpart is a covariance contribution, not permission to discard arbitrary background uncertainties.

Let a specimen reading be $T$, a source blank $A$ and a target blank $B$. If the estimated transfer is $D=B-A$, the corrected result isThe source blank cancels exactly. Even when $T,A,B$ are independent, $A$ and $D$ are not: $\mathrm{cov}(A,D)=-\mathrm{Var}(A)$. Applying the correlated-input rule givesThe GUM requires correlations from shared inputs to be retained and describes equivalent formulations in which the common input is introduced explicitly.^[ref]

For stipulated independent standard deviations $u(T)=1$ mg, $u(A)=2$ mg and $u(B)=3$ mg, $u^2(D)=13\mathrm{m}{\mathrm{g}}^2$ and $\mathrm{cov}(A,D)=-4\mathrm{m}{\mathrm{g}}^2$. Thus $u^2(Y)=1+4+13-8=10\mathrm{m}{\mathrm{g}}^2$. Incorrectly treating $T,A,D$ as independent gives 18 instead. The same result follows from the covariance matrixand coefficient vector $(1,-1,-1{)}^{\mathsf{T}}$. These numbers illustrate error accounting, not a measured carbon-recovery test.

Reference identity in algebraic uncertainty cancellation is essential. If a transfer used an earlier reading $A_1$ but the correction subtracts a later reading $A_2$, then $Y=T-B+A_1-A_2$. Their difference does not vanish merely because both were called the source blank. Correlation may reduce or increase its uncertainty depending on how the readings were obtained.

Preserve reference identifiers, timestamps and coefficients in the data reduction. Simplifying the measurement equation before propagating uncertainty can expose exact cancellations; a transfer estimated independently or containing additional drift needs its own remaining uncertainty terms.

Reference identity in algebraic uncertainty cancellation asks whether two appearances of a reference are the same measured quantity or merely readings given the same descriptive name. If a transfer is $D=B-A_1$ but a correction subtracts $A_2$, thenThe last difference vanishes identically only when the same reference value is reused. Separate acquisitions may be correlated, independent, or affected by drift; sharing a label does not decide their covariance.

For independent $T$ and $B$, also independent of the reference pair, propagation givesWith equal reference standard uncertainties $s$ and correlation coefficient $\rho$, the residual reference contribution is $2s^2(1-\rho )$. It is zero for identical reused values, $2s^2$ for independent readings, and is not generally zero just because the displayed numbers agree. The GUM requires significant correlations from common inputs to be included.^[ref]

An original acquisition model separates what cancels:Here $C$ is a common uncertain calibration contribution, while ${ϵ}_1,{ϵ}_2$ are independent repeat errors. Their difference removes both $A_0$ and $C$, but leaves ${ϵ}_1-{ϵ}_2$. If $u(C)=3$ mg and each repeat error has standard deviation 2 mg, each reading has variance $13\mathrm{m}{\mathrm{g}}^2$ and their covariance is $9\mathrm{m}{\mathrm{g}}^2$. The difference therefore has variance $13+13-18=8\mathrm{m}{\mathrm{g}}^2$, not zero.

Adding independent $u(T)=1$ mg and $u(B)=3$ mg gives $u^2(Y)=18\mathrm{m}{\mathrm{g}}^2$. Reusing exactly one recorded reference value in both places instead gives $u^2(Y)=10\mathrm{m}{\mathrm{g}}^2$. These constructed cases have different data-reduction histories despite similar-looking equations.

Reference lineage in covariance models records acquisition identifiers, shared calibration inputs and coefficients in each derived quantity. A calibration change or time-dependent drift must appear in that model if significant. Algebraic simplification is valuable only when it preserves the identity of the underlying inputs; renaming two acquisitions with the same symbol does not make their errors cancel.

Reference lineage in covariance models records which primitive observations and calibration quantities enter each derived measurement, with what coefficients. Two inputs can share the same reference yet respond to it differently. A shared name alone therefore does not establish either equal errors or exact cancellation.

For a linear measurement model, collect primitive inputs in $\mathbf{z}$, derived inputs in $\mathbf{x}=A\mathbf{z}$ and their covariance matrices in $U_z,U_x$. ThensoThe matrix records the data lineage as well as the algebra. This implements the GUM approach of expressing correlated quantities in terms of their common inputs.^[ref]

An original example uses independent inputs $T,B,C,{ϵ}_1,{ϵ}_2$ with variances $1,9,9,4,4\mathrm{m}{\mathrm{g}}^2$, respectively. Let two reference readings be $A_1=C+{ϵ}_1$ and $A_2=2C+{ϵ}_2$. Correct a specimen by $Y=T-B+A_1-A_2$. Substitution givesThe shared $C$ does not cancel, because its sensitivities are one and two. Equivalently, $\mathrm{Var}(A_1)=13$, $\mathrm{Var}(A_2)=40$ and $\mathrm{Cov}(A_1,A_2)=18$ in squared milligrams. Their difference has variance $13+40-2(18)=17$, giving the same total 27. Treating the reference readings as independent would incorrectly give 63 for the total variance.

If both readings instead contained $C$ with coefficient one, that shared contribution would cancel and the total would be 18 in the same units. These are different acquisition models, not two uncertainty conventions for the same data.

A usable lineage record therefore includes acquisition identifiers, calibration versions, reuse of numerical values and sensitivity coefficients. For nonlinear data reduction, a local sensitivity matrix replaces the linear $A$ when first-order propagation is justified. Covariance must follow the actual reuse and dependence structure; assigning independence because derived columns have different labels can discard the information needed for correct cancellation.