Apply the method to the Dahlquist test equation and set . Its amplification roots satisfy
At the roots are and . A root can leave the unit disk only through . Substitution gives the boundary equation
Direct separation into real and imaginary parts shows that both branches satisfy ; equality occurs on the branch through . Hence no root crosses the unit circle in . Moreover both roots tend to zero as in the left half-plane. Consequently the method is A-stable, and it also strongly damps the infinitely stiff limit.
Along an exact autonomous-ODE solution, and
Move every term to the left and substitute the Taylor expansions about . The coefficients of vanish for , while the first nonzero coefficient is
Thus the local defect is . At the first characteristic polynomial is
which satisfies the root condition for a multistep method. The method is therefore zero-stable and has
Away from , the outer solution is obtained by setting :
It already satisfies both endpoint conditions, but its derivative jumps at . Introduce the inner variable
and write . The inner equation is
Matching to the outer cusp requires as . The even solution is
Subtracting the common part gives the composite asymptotic expansion
Its endpoint errors are exponentially small.
At , the first and second derivatives from the two sides agree, but the third derivatives have opposite signs. The composite expansion is therefore but not .
At , the two saddles have receded to infinity and the ordinary quadratic saddle approximation is nonuniform. One should first use an asymptotic expansion of the phase and amplitude for large :
so
The phase varies on the scale rather than in an neighbourhood of a finite saddle. Rescaling in the positive and negative tails, retaining the corresponding large- amplitude, and matching these tail integrals to the finite part of the deformed contour produces the leading approximation. This is an endpoint at infinity problem; a uniform calculation may equivalently begin from the saddle representation and take the coalescing-at-infinity limit.
For , the stationary-point equation would require
so the two saddles leave the real axis. The contour can be deformed through the appropriate complex saddle or saddles, and their contributions become exponentially small or large according to the sign of the real part of . The real-axis oscillatory saddle contributions present for therefore disappear across the turning point . The admissible deformation and the pole's residue must still respect the prescribed branch cuts and the instruction that the contour pass above .
Put
On the specified branch, is positive for and negative for . The saddle points of the phase are therefore , with
and
Applying the method of steepest descent at the two simple saddles gives
This formula is valid while the pole and positive saddle remain separated by much more than their saddle width.
The pole crosses the positive saddle when
Because the original contour passes above the pole, deformation onto the steepest-descent contour contributes
when , or . It contributes no residue when , or . Hence, away from the transition,
The residue is exponentially oscillatory and , whereas each ordinary saddle contribution is .
At the pole and saddle coalesce, so the displayed saddle formula is singular and must not be used. Passing above the coincident point gives one half of the switched residue at leading order:
If , a uniform saddle-point approximation with a nearby pole replaces the discontinuous switch by a complementary-error-function multiplier.
As , , , and the pole lies in the no-residue regime. Each saddle coefficient is , so the leading approximation tends to
The force on the mean flow and the wave-activity tendency obey
Hence growth of positive wave activity produces a negative mean-flow force, while decay deposits negative momentum into the mean flow. Since part iii found a negative force for a growing, upward-radiating wave with , its wave activity is positive.
If , stationarity still gives , but upward propagation now selects . For one takes , and therefore
The integrated force reverses and accelerates the mean flow in the positive direction. The activity of a growing wave correspondingly has the opposite sign and is negative.
Define the perturbation vorticity component
Taking the curl of the linear momentum equation and using the buoyancy equation gives
Multiply the first equation by , the second by , and horizontally average. Periodicity makes the averaged derivatives vanish, while
by incompressibility and integration by parts. It follows that
Therefore the wave activity conservation law is
The sloping boundary exerts the pressure drag
on the fluid. At generation this equals : the mountain supplies a negative vertical flux of horizontal momentum to the wave. Where the wave dissipates, convergence of that flux transfers the same westward momentum to the mean flow. A forcing that maintains the prescribed uniform basic current must supply the compensating eastward momentum.
For , choose the upward-radiating root
The boundary condition gives a vertical-velocity amplitude of magnitude . Incompressibility gives , so horizontal averaging over one wavelength yields the wave momentum flux
If the wave is completely absorbed in a remote dissipation layer, this negative flux increases to zero across the layer. The integrated force on the mean flow is therefore
It acts opposite to the positive basic flow.
The exact no-penetration condition on the stationary boundary is that the velocity be tangent to it. Linearized at , it is
The terrain is stationary, so and . The dispersion relation gives
A vertically propagating wave therefore exists if and only if
The upward radiation condition selects for . Taking gives . Lines of constant phase satisfy
so they tilt upstream as height increases. The discarded sign of gives the mirror-image phase tilt and downward energy propagation.
Let every perturbation be proportional to and define the intrinsic frequency
Eliminating pressure with incompressibility, and then eliminating buoyancy, gives the internal gravity wave dispersion relation
The vertical group velocity is
Thus energy propagates upward when and downward when . Equivalently, on the positive-intrinsic-frequency branch upward propagation requires , while on the negative branch it requires .
In a steady state the time derivative of quasi-geostrophic potential vorticity vanishes, leaving the local balance
Choose the undisturbed state immediately east of the compact forcing as the integration condition. The solution is then
The discontinuity in this ideal expression reflects the discontinuous prescribed forcing at ; a vertically smooth forcing gives the corresponding smooth vertical profile.
The adjustment begins with the rapidly propagating barotropic mode and is therefore initially almost depth-independent. Successively slower baroclinic modes then arrive from the forcing region. Their Fourier series in the vertical normal modes progressively reconstructs the forcing's upper-layer profile, tending to the stated steady solution while points to the east remain unaltered.
The method of characteristics shows that a point is affected only after a westward characteristic from the forcing region reaches it. At a western observation point , during the interval
the fast barotropic signal has arrived but the first and higher baroclinic signals have not. Consequently
which is nearly independent of depth. At the eastern point , no westward Rossby-wave characteristic arrives from the forcing region, so the disturbance remains zero under the stated initial and radiation conditions.
The propagation speed derived in part v is . Thus the question's notation must be read as a comparison with these modal Rossby signal speeds; using the gravity-wave speeds literally would not describe the long-wave equation derived above.
Expand both the forcing and response in the orthogonal vertical normal modes. Projection onto gives
If the horizontal forcing scale obeys , the relative vorticity term is small compared with the stretching term. The resulting long-wave equation is
Thus each mode communicates the forcing westward at its long Rossby wave speed , with the barotropic mode fastest because is largest.
Suppose . The smallest root satisfies
so the leading external gravity wave eigenfunction is depth-independent:
For , the roots lie just above :
and hence
In particular, up to an arbitrary normalization and sign,
The hierarchy separates the fast, nearly barotropic free-surface mode from the internal baroclinic modes.
The rigid lower boundary has . For a time-dependent normal mode this gives
The free-surface condition from part i gives
Writing , the lower condition selects
The upper condition therefore requires
Equivalently, with and ,
Each positive root determines the barotropic mode or a baroclinic mode through .
Linearization about rest replaces the material derivative by , so the quasi-geostrophic potential-vorticity equation becomes
Insert the separation of variables and impose
The horizontal amplitude then satisfies
The Linear Rossby-wave equation therefore governs each vertical normal mode, whose Rossby deformation radius is .

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact