The axial velocity decreases toward the wall, so . For a power-law fluid, the stress magnitude is
Hence
Integrating inward from the no-slip boundary condition gives
For this reduces to the parabolic Hagen--Poiseuille profile.
Put , with flow in the positive direction, so . Balancing pressure forces and wall shear on a cylindrical fluid volume of radius and length gives
Thus the wall stress is fixed before any constitutive equation is specified.
For fully developed pipe flow, the axial Cauchy equation reduces to
Regularity at the axis removes the integration constant, so
Its magnitude rises linearly from zero at the axis to at the wall.
A generalized Newtonian fluid responds instantaneously with stress determined only by the current scalar shear rate. It therefore cannot represent viscoelasticity, including stress relaxation, elastic recoil, memory, and rate-dependent normal stresses. It also cannot represent thixotropy, in which microstructure and viscosity evolve with the duration and history of shearing. Other omitted effects include hysteresis and genuine finite-time yielding.
Let
be the rate-of-strain tensor and let . The invariant magnitude convention that reproduces the ordinary scalar rate in simple shear flow is
The tensor contraction makes this definition independent of a rigid rotation of coordinates.
Far from the inner edge, use and the alpha-viscosity prescription
Mass conservation then gives
At the onset of disk self-gravity, . Since , this condition reduces to
The blackbody approximation and local radiative balance on one face give
while the stated ideal-gas estimate is . Inserting these expressions into the self-gravity condition gives
Solving for produces
Beyond this radius, the disk's own gravity rivals the central vertical gravity; fragmentation and star formation can then invalidate the smooth steady thin-disk model.
For a Keplerian accretion disk, , so
Here is the dissipation summed over the two faces. The total luminosity is
This is the binding energy per unit mass of a circular orbit at the inner edge, multiplied by the accretion rate. The zero-torque inner boundary condition ensures that no additional mechanical work enters from smaller radii.
The luminosity emitted outside radius is
Writing , the condition becomes . Its physical root is , and hence
Half of a thin disk's luminosity therefore comes from only the innermost factor four in radius, so strong-gravity effects and the inner-boundary condition strongly influence its observed spectrum.
Vertically integrating the continuity equation and imposing a steady axisymmetric flow gives
Thus the inward-positive mass accretion rate is
The zero-torque condition at gives the standard Shakura--Sunyaev thin disk relation
Combining this relation with mass conservation, or substituting it into the stated drift equation, yields
Far outside the inner edge this reduces to .
Well inside the Bondi accretion radius, pressure is negligible and the inflow approaches the free-fall speed
Steady spherical mass conservation gives
Estimating the outward optical depth across a radial scale with electron-scattering opacity ,
The integral optical depth to infinity differs only by a factor of two in this free-fall approximation.
At the Schwarzschild radius, when
If the conventional Eddington accretion rate is , then . This comparison depends on the reference efficiency , while itself follows directly from optical depth.
Writing gives
For , the inner flow is optically thick and its photosphere lies at
The diffusion speed is . Hence
and equality defines the photon-trapping radius
Inside , inward advection outruns outward diffusion, so photon trapping in an accretion flow carries most released radiation into the black hole.
Only the binding energy released outside escapes efficiently. Its order of magnitude is
The radiative efficiency of black-hole accretion therefore decreases inversely with supply rate:
Order-one coefficients depend on the optical-depth and inner-boundary conventions, but the luminosity saturation and are robust.
A singular isothermal sphere has total density and circular speed
If gas traces the gravitating matter, . A moving black hole gravitationally focuses that gas, so the relevant estimate is the Bondi--Hoyle--Lyttleton accretion rate
Hydrostatic gas in the isothermal potential has of order , and therefore
up to an order-one coefficient. Taking and gives multiplying the displayed expression. The same scaling that produces Chandrasekhar dynamical friction therefore sets the likely capture rate as the hole spirals inward. Feedback, angular momentum, a gas core, or a multiphase medium can reduce the actual rate.
Use cylindrical coordinates , put , and write the purely azimuthal velocity as . The steady radial, azimuthal, and vertical momentum equations are
Thus , where the effective gravity in a rotating frame is
When radiation pressure supplies the pressure support, force balance gives
On the upper conical surface , the tangent and outward normal are
Because a pressure surface is an equipotential surface, . Since , this fixes
The lower face gives the reflected result. One face has area element . Adding both faces and using yields
Consequently
For a broad radial range, each logarithmic interval can radiate an Eddington-scale contribution because rotation reduces the surface-normal gravity. The factor makes a thin wedge faint and lets a geometrically thick funnel expose a larger effective gravity and emitting area.
At distance , isotropic luminosity produces radiative acceleration in material of opacity . In fully ionized hydrogen, one electron supplies a Thomson scattering cross-section for approximately one proton mass of material, so . Balancing radiation against the Newtonian gravitational field of the black hole gives the Eddington luminosity
Below this luminosity gravity can confine optically thin ionized hydrogen; above it, electron scattering alone accelerates the gas outward.
An electron--positron pair has mass and total scattering cross-section , so its opacity is . Therefore
The limit is lower because the radiative force per unit inertial mass is larger in a pair plasma.
For a cloud with arbitrary constant opacity per unit mass,
Suppose the luminosity jumps to a constant while the cloud is at rest at . With , its radial acceleration is
Multiplication by and integration from to infinity gives conservation of energy
This result assumes that and remain constant and that the cloud stays optically thin.
The photon mean free path is
In time a photon takes about independent steps. Isotropy assigns one third of the mean-square displacement to any coordinate, giving the Silk damping diffusion scale
In the matter era, and . Accumulating the diffusion variance while converting each displacement to comoving length gives
Hence
The order-one coefficient depends on the precise diffusion-length convention; the expression uses the convention stated in the question.
In a universe containing only baryons and radiation, photon diffusion erases coupled baryon-photon perturbations below this scale before recombination. Baryons begin subsequent matter-era growth from a strongly smoothed field, suppressing small-scale structure. With cold dark matter, collisionless dark-matter perturbations are not Silk damped and provide surviving gravitational wells. After recombination baryons fall into those wells, so baryonic acoustic structure is damped but small-scale total-matter structure can continue to grow.
For a statistically homogeneous and isotropic density contrast,
Using the Fourier transform convention
and translational invariance gives
with
At one point,
For a spherical top-hat volume ,
The overlap of two radius- balls separated by is
Therefore
For ,
Thus
This calculation assumes that the observed galaxies trace the matter field with unit, scale-independent galaxy bias, and that the fitted power law remains valid throughout the top-hat separations.
The weaker plume detrains into the middle layer at , while the stronger plume passes through it and feeds the upper layer at . Middle-layer volume balance is
Using gives
The middle layer receives buoyancy flux and loses volume by entrainment into the strong plume. The upper layer ultimately receives both source buoyancy fluxes and loses volume through the ceiling. Hence
The interior-minus-exterior pressure is constant below , rises with slope in the middle layer, and with slope in the upper layer. Put
Equal ideal openings split the total pressure difference equally, and the common ventilation rate is
Thus the required equal vent areas are
Outside, pressure is hydrostatic with slope . Inside it has the same slope below and the shallower slope above . Thus is a negative constant below the interface, rises linearly above it with slope , and is positive at the ceiling. The floor vent admits air and the ceiling vent exhausts it.
Let be a common discharge coefficient and define the effective opening area
The ventilation flow is
Steady volume and buoyancy balances require
Therefore precisely when the effective area is chosen as
The individual areas must additionally realize this ; their ratio fixes how the total pressure drop is divided between the floor and ceiling vents.
Batchelor entrainment models a turbulent plume as drawing ambient fluid inward at a speed proportional to its characteristic vertical velocity. In a top-hat axisymmetric plume, let
be volume, momentum, and buoyancy flux. The Boussinesq approximation uses a common density in inertia and volume conservation while retaining the small density difference in . It requires and becomes inaccurate for very hot source fluid or near openings with large density changes.
For a point source in an unstratified lower layer, the integral plume equations are
where is the entrainment coefficient. Their pure-plume solution is
with
The shallow-water equations cease to apply inside the narrow nose, so a gravity-current front condition is needed to relate its speed to the depth immediately behind it. Use
where is the front Froude number; the ideal deep-ambient von Kármán condition gives .
In a uniform axisymmetric box model, conservation of contaminated volume gives
The total nondimensional heat content is , while cooling acts over area , so
Eliminating time and taking the initial release radius as negligible gives
Spreading stops as , at
Hence the maximum covered area is
Set
The axisymmetric reduced-gravity equations are
The extra in momentum is the depth average of the hydrostatic pressure gradient caused by horizontal density variation.
In variables these become
The three characteristic speeds are
Along , temperature obeys
Along , , a left-characteristic projection gives
The shallow-water approximation requires current depth to be much smaller than its horizontal radius, hydrostatic vertical momentum balance, and horizontal velocity and temperature that are nearly depth-uniform. The radial scale and cooling time must also be long compared with the vertical adjustment scales.
The density contrast is
so the inertia may use the common reference density while this small difference is retained in buoyancy: the flow is Boussinesq. Because the current is lighter, it occupies the top of the lake. Its free-surface displacement is smaller than its internal-interface displacement by the ratio of reduced gravity to gravity. A rigid-lid reduced-gravity model is therefore valid only when ; otherwise the external free-surface mode must be retained.
At , the slowly varying wave envelope obeys
where the group velocity obtained from is
It satisfies . If initially , the envelope structure varies across the wavevector and translates unchanged in the direction at speed
Thus internal-wave crests propagate with phase velocity parallel to , while the packet and its energy propagate perpendicular to with the group velocity.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact