 Passive membrane response in current clamp

Model a spatially uniform cell membrane as a capacitor of membrane capacitance $C_m$ in parallel with membrane electrical resistance $R_m$ and a fixed leak reversal potential $E_L$. Exclude active ion channels, seal leak current and pipette capacitance. For electric current $I$ injected into the biological cell, electric charge conservation yieldsStarting at $V(0)=E_L$ and applying constant $I$ gives the ordinary differential equation solutionThe steady state rise is $I{R}_m$; the time constant is $R_m{C}_m$. With $I=50\mathrm{pA}$, $R_m=200\mathrm{M\Omega }$, $C_m=50\mathrm{pF}$ and $E_L=-70\mathrm{mV}$, the rise is $10\mathrm{mV}$ and ${\tau }_m=10\mathrm{ms}$. At one time constant the rise is $10(1-e^{-1})\mathrm{mV}\approx 6.321\mathrm{mV}$. The figure's uncompensated pipette voltage adds $I{R}_s=1\mathrm{mV}$ for $R_s=20\mathrm{M\Omega }$. The membrane voltage is continuous at step onset in this model, while the pipette voltage immediately acquires that access drop.

Checking the units is instructive: electrical resistance times capacitance has units $\Omega \mathrm{F}=\mathrm{s}$, and electric current times electrical resistance has units of voltage. Unlike the passive voltage clamp transient under patch-clamp series resistance, this ideal current clamp membrane time constant is set by $R_m{C}_m$, not $R_s{C}_m$. Strong current steps can recruit voltage-gated ion channels; the passive model then fails and cannot generate an action potential. Small pulses of both signs, stable access and repeated baseline measurements help test whether the passive approximation is appropriate.