Exobase 2026-10-06
The exobase marks the transition between a collisional atmosphere and its exosphere. For a neutral, approximately hydrostatic ideal gas, take mean free path and atmospheric scale height . The criterion givesAn order-one collision convention can change this coefficient. The pressure is not universal: the collision cross-section, composition, local gravity, and ionization must be specified. A strongly escaping, non-hydrostatic atmosphere requires an appropriate density-gradient length instead of a hydrostatic .
Gravitational focusing Created 2026-09-25 Updated 2026-11-05
Gravitational focusing enlarges the collision cross-section of gravitating bodies because attraction bends incoming trajectories toward one another. Let two spherical bodies have total mass , sum of radii , and relative speed at large separation. In the Newtonian two-body problem, an encounter that just grazes at separation satisfiesHere is the limiting impact parameter. Conservation of energy sets the speed at closest approach, and conservation of angular momentum relates that speed to the initial impact parameter.
The extra term is the squared ratio of the mutual escape velocity at contact to . Rapid encounters approach the geometric area , while slower encounters can have a substantially larger collision cross-section. This estimate assumes isolated two-body trajectories and counts physical contact rather than permanent gravitational capture.
Knudsen number Created 2026-10-07 Updated 2026-10-14
The Knudsen number is the dimensionless ratio of an intermolecular mean free path to a specified characteristic length of the apparatus or flow. The mean free path measures the distance travelled between gas–gas collisions; measures the distance over which boundaries or macroscopic conditions matter. Wall encounters must not be counted as gas–gas collisions in this comparison: doing so would hide the very wall-dominated behavior we want to detect. The same gas can therefore have a small Knudsen number in a large vessel and a large Knudsen number in a tiny opening.
For a dilute hard-sphere gas of identical molecular diameter in thermal equilibrium, use the conventionHere is the number density, the pressure, the absolute temperature, and the Boltzmann constant; the second equality uses the ideal gas law. The collision cross-section is , and the accounts for both partners moving with independent equilibrium velocities. Mixtures and velocity-dependent collision cross-sections require a stated molecular model and mean free path convention; the displayed expression is not an exact formula for every real gas. [ref]
https://farside.ph.utexas.edu/teaching/355/Surveyhtml/node219.html. Fitzpatrick, Mean Free Path, equations 5.209–5.219
[ref]https://arxiv.org/abs/1309.1197. Steve T. Paik, Is the mean free path the mean of a distribution?, dilute hard-sphere equilibrium convention
As a numerical toy example, choose and , without claiming that this is a measured molecular diameter for a particular gas. The formula gives at . It yields for a vessel but for a gap. At the same toy gas has , comparable to the centimetre vessel. Reducing either pressure or apparatus size can thus expose molecular transport.
Choose for the question being asked: a tube diameter compares the mean free path with wall separation, while tube length describes a different geometric scale. For a positive macroscopic field , a local gradient scale can instead be , where its gradient is nonzero. A large vessel can contain a thin region with a large local Knudsen number. Small geometric Knudsen number alone does not guarantee a slowly varying near-equilibrium flow. The time, velocity and space scalings must also be stated when the Knudsen number appears as a coefficient in a Boltzmann equation. [ref]
https://ntrs.nasa.gov/citations/20230013741. NASA, Comparison Between DSMC and CFD for Hypersonic Planetary Entry Simulations (2023), local gradient-length breakdown analysis
Mean free path Created 2026-10-06 Updated 2026-10-14
The mean free path is the average distance travelled between collisions. For dilute targets with number density and effective collision cross-section , ; identical-particle conventions introduce factors such as .
Neutron activation 2026-10-18
Neutron activation is the production of radioactivity by irradiating a material with neutrons. One route is neutron capture producing an unstable isotope; other nuclear reactions can also produce unstable atomic nuclei. A specimen's later radioactive decay provides a way to detect that a transformation occurred during irradiation. It does not by itself identify the product or reconstruct the incoming neutron energy distribution.
This makes neutron activation a useful bridge between an invisible radiation field and a delayed measurement. The neutron flux and collision cross-section determine production; radioactive decay and detection efficiency determine what remains observable later. Neutron activation buildup and decay keeps these stages separate.
Neutron capture resonance 2026-10-18
A neutron capture resonance is an energy interval where a matching excited state of the combined atomic nucleus enhances capture. Its collision cross-section can have a peak rather than a monotone dependence on energy. The resonance pole description connects this to quantum scattering. Slowing a neutron through such a region can first increase and then decrease a particular reaction response. The capture probability also competes with other reaction channels.
Neutron detection by proton recoil 2026-10-18
In neutron detection by proton recoil, a neutron strikes a hydrogen atomic nucleus, namely a proton, and the moving proton produces detectable ionization. Paraffin wax provides many hydrogen targets. There are two distinct questions: how much kinetic energy can a collision transfer, and how often does it occur? Elastic collision kinematics answers the first. It does not determine a collision cross-section or a detector's efficiency.
For the following derivations the target is initially at rest in the laboratory but is free to recoil. Its mass is finite. In particular a proton must not be treated as an immovable target. All massive particles are nonrelativistic particles, their translational kinetic energies are , and the collision changes no internal state. Target binding and thermal motion are neglected relative to the incident kinetic energy. These assumptions suit an introductory description of fast-neutron elastic collisions; they do not cover every neutron capture or other nuclear reaction.
Neutron fluence 2026-10-20
The time integral of scalar neutron flux, with inverse-area units. Multiplication by a constant microscopic reaction collision cross-section gives a dimensionless exposure parameter. A single integrated exposure does not specify how the neutron energy distribution varied during irradiation.
Neutron flux 2026-10-18
Let be the number of neutrons per unit volume in an energy interval. The scalar neutron flux per unit energy is , with the speed. Its integral has units of inverse area per unit time. It counts path length traversed per volume per time, including all directions; it is not the signed current through an oriented surface.
For a small uniform specimen containing target atomic nuclei, a reaction-specific collision cross-section gives the expected production rateAssume the incident field is little changed within the specimen, target depletion is negligible and each counted reaction creates the product of interest. If that product has a production branching fraction below one, include it in or as an additional factor. A single neutron activation measurement supplies one weighted integral of an energy distribution, not a unique reconstruction of that distribution.
For an original two-group example, stipulate response collision cross-sections . With the same total scalar neutron flux , changing from all fast neutrons to half slow and half fast changes from to . No additional neutrons need be emitted by the source. The chosen factor ten is not a historical silver measurement.
For some capture reactions over a limited low-energy interval, is a useful approximation. At fixed neutron flux, it gives increasing reaction probability per path length as speed decreases. At fixed neutron number density, is constant in this approximation, so the rate per target is unchanged. A real neutron moderator changes the local density, energy distribution, escape and absorption together. Neither all collision cross-sections nor all neutron activation rates vary monotonically as .
An encounter between galaxies or clusters mainly couples their collective gravitational fields; it need not involve physical impacts between individual stars. Direct stellar collision rates depend on number density, relative speed and gravitational focusing. For two stars the collision cross-section is approximatelyIn an ordinary galaxy, the small geometrical stellar filling factor makes such impacts rare even while the galaxy undergoes a major encounter. Dense stellar cores are an important exception, not a reason to treat all galaxies as collisional fluids.
Tidal forces depend on the gradient of the perturber's field. For a distant fast encounter of mass , impact parameter and speed , the impulse scale for a star at displacement isA more specific result illustrates the geometry. Put the straight-line perturber trajectory in the plane along , with closest approach at . In the tidal and impulse limits,for an initially spherical, nonstreaming target with randomly sampled internal phases. The cross term averages to zero, and . Heating, expansion and tidal stripping preferentially affect weakly bound outer stars. A slow encounter can be adiabatically shielded rather than impulsive; a penetrating or strongly resonant encounter needs more than this distant straight-line approximation.
Disc rotation and orbital orientation matter. Prograde passages can drive stronger coherent distortions than corresponding retrograde passages. Tidal bridges, long tails, asymmetric arms and shells can record the encounter. Restricted gravitational calculations already reproduced prominent bridge and tail structures without requiring individual stellar collisions; full self-consistent models additionally follow the gravity of the responding discs and haloes.[ref]
Galactic Bridges and Tails by Alar Toomre and Juri Toomre. 1972 abstract and §II, close tidal encounters of initially rotating test-particle discs
A first high-speed passage need not bind the pair. Capture or merging requires orbital energy and angular momentum to be redistributed into internal motions, escaping material, gas radiation or the surrounding halo. Dynamical friction transfers orbital energy to a gravitational wake and can bring a bound satellite inward. In a major merger, the potential changes on orbital times and violent relaxation redistributes stellar energies; phase mixing then smooths fine orbital structure. These are collective collisionless processes, distinct from slow two-body relaxation.
Gas behaves differently from stars: gas streams can shock, dissipate energy, lose angular momentum and fuel a central starburst or active nucleus. Gas-poor mergers are correspondingly more nearly dissipationless. Outcomes depend on mass ratio, orbital angular momentum, relative velocity, halo structure and gas fraction: they range from a modest flyby and tidal debris to disruption of a satellite or a merged remnant. Slow encounters in a group are generally more favorable to merging than otherwise comparable very fast unbound passages, but no single speed or mass-ratio threshold follows without an explicit structural model.
Past exam of the mathematics course of the University of Cambridge 2005 iii Paper 70 2 Solution Created 2026-10-03 Updated 2026-10-14
Thermal energy versus electrostatic repulsion. The mean translational kinetic energy of one nonrelativistic thermal proton isUsing the center-to-center touching separation , the Coulomb barrier estimate isThus . Using rather than as the rough interaction distance doubles the estimate but leaves the conclusion unchanged. Typical solar thermal energies are far below the classical barrier. The two essential ideas are the high-energy tail of the thermal distribution and quantum tunnelling through the Coulomb barrier: neither a mean-energy estimate nor a sharp classical cutoff describes the reacting population.
For two equal-mass protons, let be their relative speed. In the center-of-mass frame each has speed , so their total collision energy isHere is the reduced mass, not the stellar mean molecular weight.
In the low-energy, nonresonant approximation, the geometrical quantum-wave factor in a collision cross-section is proportional to the squared de Broglie wavelength, hence to . The slowly varying short-range reaction probability is absorbed into ; for proton–proton fusion it also includes the small weak-reaction probability. The rapidly varying exponential is the quantum tunnelling probability. For a Coulomb potential , its leading semiclassical exponent isThe integral follows from ; its dimensionless integral is . A finite nuclear radius modifies the short-distance factor absorbed into . In this convention : it is a penetration-energy scale, distinct from the classical contact energy .
Thermal averaging and pair counting. Each proton samples collision partners with number density and collision flux , so its collision rate is . Multiplying by the number of protons counts each identical pair twice. The thermonuclear reaction rate is thereforeThe relative speed of two independent thermal protons has a Maxwell-Boltzmann velocity distribution with reduced mass . Changing variables with gives the normalized energy densitySubstituting and the collision cross-section causes the energy powers to cancel:
The Gamow peak and its Gaussian width. Set . It diverges at either endpoint and has its unique minimum whereThus the energy called in this question is the Gamow peak energy,In the stellar tunnelling regime ,This establishes the requested hierarchy in its physical regime; it is not an inequality valid at arbitrary temperature.
At the minimum, and . HenceThe Gaussian standard deviation is , small compared with when . Extending the lower endpoint to relative to the peak then givesCombining this with the thermal prefactor yields the Gaussian approximation to a nonresonant thermonuclear rate,At fixed reactant density and fixed , comparison with the requested temperature form givesThe constant here has dimensions of temperature; it is not inverse temperature. Resonances, plasma screening or variation of would require corrections to this particular approximation.
Past exam of the mathematics course of the University of Cambridge 2014 iii Paper 59 1 Solution 2026-10-06
Synchronous radius and its limits. Kepler's third law for a circumplanetary orbit givesHere is the gravitational constant. A planet-synchronous orbit repeats after one spin period. A planet-stationary orbit additionally requires a circular orbit, zero orbital inclination to the equator and prograde motion. Then an antenna fixed on the ground points continuously at the same satellite; merely matching the orbital period does not give this property.
Write the planetary radius as . Requiring the semi-major axis to exceed gives . The stellar tidal force restricts the circumplanetary orbit to the Hill sphere, of radius . ThusThese are the surface and Hill-radius constraints in the idealized spherical, small- model. Long-term prograde stability generally requires a radius appreciably inside the Hill sphere; for nonzero orbital eccentricity, the surface constraint applies to the periapsis, not just to the semi-major axis.
Collision time and the launch population. A phase-mixed isotropic swarm occupies a shell of radial scale . Its number density scales as , its relative speed as , and its geometric collision cross-section as . Consequently the total collision rate scales as . To give the numerical normalization used here, adopt an effective shell volume . At a fixed position the velocity directions are uniformly distributed in the tangent plane, so their mean relative speed is . For an unordered pair, the collision cross-section is , givingThus the mean interval between collisions is in this large-population kinetic model. The effective shell width fixes an order-one coefficient: small orbital eccentricity and random planes alone do not specify a unique radial probability density. Phase mixing, negligible gravitational focusing, , and uncorrelated encounters are implicit in this estimate. Exactly identical orbital periods with perfectly fixed phases do not themselves produce a memoryless collision process.
For nearly planet-stationary orbits with , the swarm volume is smaller by a factor of order , while the relative speed is smaller by the same factor, since vertical motion of scale dominates the eccentric motion. The two changes cancel in the rate : there is no parametric factor in the collision time within the same phase-mixed kinetic approximation. Numerical factors and phase correlations can differ. This is not an argument that bringing all satellites into one nearly circular plane makes their phases random.
With , an Inhomogeneous Poisson process has cumulative hazard functionThe survival function of the first collision is . Setting the expected number of collisions to one givesThis is a characteristic first-event population, with probability of an earlier event. It is not a median: the median has an additional factor .
Which population collides next? Immediately after the first disruption let and . The latter follows from mass conservation for equal-density spherical pieces. Using the same unordered-pair counting and geometric collision cross-sections as above, define ; thenHere stand for the usual large-population approximations to . The factor two distinguishing identical and different species is essential. The probability that the next collision is fragment–fragment isIt is the most likely type if and . It has probability greater than one half ifFor , a strongly fragment-dominated next event therefore requires ; the fragment–satellite comparison is more restrictive than the satellite–satellite comparison. If , the next event must be fragment–fragment, provided fragments remain.
Population equations and the normalization discrepancy. Every satellite–satellite event produces fragments and destroys two satellites. Every satellite–fragment event produces a net fragments and destroys one satellite; every fragment–fragment event destroys two fragments. Consistent collision counting therefore givesFor , and . The last two terms in are then twice those in the printed equation. This is a genuine factor-of-two inconsistency: equal-size fragment pairs have a collision cross-section smaller by , so their event rate must be if the satellite event rate is ; destroying both fragments necessarily gives the sink .
If the printed equation is taken as a prescribed approximate rate model instead, its implicit event rates are , and . Under precisely that mixed normalization, its corresponding satellite equation isThe printed source term also neglects the consumed fragment in a satellite–fragment event, a legitimate relative approximation. That approximation does not repair the pair-counting discrepancy.
The ensuing cascade. This is a two-size fragmentation cascade. First use the printed approximate model, dropping satellite–satellite events as requested. Put , , and take . ThenIntegrating this linear differential equation, with and , givesInitially the collisional cascade grows if , with approximate early exponential growth time when the satellite population is nearly fixed. The fragment population reaches its maximum atAfterwards satellites are depleted and fragment–fragment losses dominate. For the continuum solution has , , withWhen no satellites remain initially, directly. Small integer populations eventually invalidate these deterministic differential equations.
The consistently counted model has, to leading order in , exactly the same curve and peak, but both retained time derivatives are twice as large. Its growth time is , and . Keeping and the consumed fragment replaces by and in the curve by . This explicitly separates the physical collision bookkeeping from the printed normalization while giving the evolution under both conventions.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 315 2 a i Solution Created 2026-10-03 Updated 2026-10-06
In the collisionless exosphere, an atom escapes if its outward trajectory has positive total mechanical energy. Neglect tides and stellar forces and use Newtonian gravity at exobase radius :With thermal speed , the Jeans escape parameter isA thermal distribution always has an escaping tail; Jeans escape is exponentially suppressed for , with Jeans escape flux proportional to . Efficient escape requires of order a few or smaller, with an order-unity energetic estimate .
Assume a Neptune-like mass and radius, , and atomic hydrogen. Using the supplied rounded constants givesHenceUsing the mean kinetic energy instead gives an order-unity coefficient and . An expanded exobase has weaker binding and lowers the estimate by . A comet-like tail can also be shaped by radiation pressure and stellar-wind interactions; it does not by itself measure or prove that a hydrostatic Jeans model is valid. At , and hydrostatic equilibrium fails as a global description: substantial mass loss must usually be treated as hydrodynamic atmospheric escape.
The exobase is defined by mean free path , not by a universal pressure. For a neutral hydrostatic gas with collision cross-section ,For example, explicitly assuming gives , or . These are representative extremely dilute neutral-exobase pressures, with orders of magnitude varying with composition, cross-sections and expansion. The supplied constants contain no collision information, so they cannot uniquely determine an exobase pressure; ionization or a non-hydrostatic density profile changes this estimate.
Cadmium acts as an energy-selective neutron absorber in the stated comparison. Its large thermal capture collision cross-section preferentially reduces the thermal neutron field reaching the source material, while its much lower fast-neutron capture probability allows more of the emitted fast neutrons to escape. This limits thermal neutron-induced changes in the source while retaining its qualitative role as a neutron emitter.
The point is selectivity between incoming thermal and outgoing fast components, rather than a claim that cadmium is transparent to every neutron or that capture produces no secondary radiation. This explains the stated material choice at a conceptual level; no source construction, cladding dimensions or irradiation specification follows from it.
Unordered-pair collision rate Created 2026-10-06 Updated 2026-10-07
For a dilute phase-mixed population, an identical-species collision rate counts unordered pairs: . Different species have rate . Here uses the collision cross-section and relative speed. Destroying both identical particles gives , not . This distinction prevents inconsistent factors when using one kinetic kernel for several particle sizes.
