Past exam of the topics in fluid mechanics course of the University of Oxford / 2023 / 1 / a / iv

Use an asymptotic expansion at fixed $z$, evaluating the boundary conditions at the instantaneous $z=h(x,t)$. At leading order, the downslope equation gives ${\hat{u}}_{0,zz}=0$. The wall condition and the surface condition ${\bar{u}}_z(h)+{\hat{u}}_{0,z}(h)=0$ implyHere $u^{(0)}$ denotes the total leading velocity, to distinguish it from the dimensional scale $U_0$. The continuity equation and wall impermeability then giveThe transverse momentum equation gives ${\hat{p}}_{0,z}=0$. The normal stress condition therefore yieldsThe leading volume flux per unit width is $q^{(0)}={\int }_0^h{u}^{(0)}dz=2h^3/3$. Consequently mass conservation gives $h_t=-2h^2{h}_x+O(\epsilon )$. This relation eliminates $h_t$ inside the first inertial correction:Set $G=2h_x\cot \alpha -3S{h}_{xxx}$. The $O(\epsilon )$ downslope equation and boundary conditions areTwo integrations giveThe pressure correction ${\hat{p}}_1$ is not needed for this calculation because its downslope pressure gradient enters only at $O({\epsilon }^2)$.

Integrating the total velocity across the film givesIndeed the three inertial polynomial terms integrate to $\mathrm{Re}{h}^6{h}_x(1/30-1/6+2/3)=8\mathrm{Re}{h}^6{h}_x/15$. Integrating the continuity equation and using the kinematic boundary condition gives $h_t+q_x=0$. Hence the Benney equation isNormal gravity smooths height variations on the upper side of the slope, while the inertial correction can amplify them. Surface tension suppresses sufficiently short wavelengths.