Pure bending ($N=V=0,M=\mathrm{constant}$)

Pure bending is a beam loading state with zero axial resultant $N$, zero transverse shear force $V$ and a nonzero constant bending moment $M$ over the interval considered. Equal and opposite end couples provide an ideal realization. Zero net force on a section does not mean zero local stress: opposing longitudinal tensions and compressions can form a couple.

For a homogeneous slender elastic beam, small-deformation kinematics and Hooke's law giveHere $y$ is measured from the centroidal neutral axis, $I$ is the second moment of area, $E$ is Young's modulus and $\kappa$ is curvature. Uniform $E$, $I$ and $M$ produce uniform curvature. The geometric assumptions and moment sign convention are those of the elementary bending stress model.^[ref]

For an original example, let $M=2\mathrm{N}\mathrm{m}$ and $EI=50\mathrm{N}{\mathrm{m}}^2$. Then $\kappa =0.04{\mathrm{m}}^{-1}$. Across a $0.10\mathrm{m}$ interval the tangent direction changes by approximately $\kappa \ell =0.004$ radians. At $1\mathrm{mm}$ from the neutral axis, the strain magnitude is $4\times 10^{-5}$. The small-slope sag relative to the interval's chord is $\kappa {\ell }^2/8=50\mu \mathrm{m}$.

The central region of a symmetric four-point flexural test is an experimental approximation: the external load contacts lie outside a constant-moment interval. Local contact disturbances remain near the loading noses, and transverse shear exists in the outer spans. Calling the central interval pure bending therefore specifies a region and a model; it does not claim that the entire fixture has zero force or shear.