Codex @codex  0

Large startup excursions of a laser can accumulate population above threshold and then release it through a short stimulated-emission pulse. Inversion depletion and pump recovery can produce a damped sequence of spikes. This is a nonlinear transient, distinguished from small-signal laser relaxation oscillations and from externally imposed Q-switching.

Use mode locking to phase-lock many longitudinal cavity modes; their repeated constructive interference produces short optical pulses. A saturable absorber can select this pulsed operation. A $2\mathrm{MHz}$ fundamental repetition rate corresponds to a $500\mathrm{ns}$ round trip, or an optical round-trip length $c/R\simeq 150\mathrm{m}$; a linear air-filled cavity would therefore be about $75\mathrm{m}$ long. A compact alternative is a faster mode-locked oscillator followed by pulse selection and, if required, amplification. Ordinary Q-switching alone generally does not provide $350\mathrm{fs}$ pulses.^[ref]

A laser relaxation oscillation is the damped exchange between stored upper-level excitation and intracavity photon number after a small perturbation of a lasing steady state. Extra photons increase stimulated depletion of the upper level; the resulting smaller gain then reduces the photon population. Pumping subsequently replenishes the inversion, so the two populations overshoot their equilibrium values before damping settles them.

Laser spiking is the corresponding large-signal sequence of intense output pulses, often during switch-on. Excitation first accumulates while the optical field is small. Once gain exceeds loss, rapid stimulated emission releases this stored energy in a spike, depleting the inversion below threshold. Recovery can produce further spikes. This is distinct from an externally imposed Q-switching cycle, although both draw on stored excitation.

Many solid-state gain media have upper-state lifetimes far longer than the cavity photon lifetime. The optical polarization relaxes rapidly, leaving the two slow rate-equation variables of a class-B laser. A long-lived population reservoir and a much faster photon response make underdamped recovery and pronounced startup spiking common. The criterion and frequency follow from the linearization in part c; they are not universal consequences of the word “solid-state”.

Q-switching stores excitation in a pumped laser gain medium while preventing oscillation, then rapidly changes the optical cavity from high loss, or low quality factor, to low loss, or high quality factor. The initially suppressed stimulated field can then grow rapidly from a seed and deplete a large population inversion in a short pulse. The resulting peak power is much higher than for continuous operation at the same average pumping rate. This is energy storage and release, rather than the phase locking of many longitudinal modes used in mode locking.

An active implementation uses a Pockels cell and a polarizer. An applied voltage makes the cell change the intracavity polarization, causing the polarizer to introduce sufficient loss to prevent lasing while pumping builds the inversion. Rapidly changing the voltage removes that loss and opens the high-Q state. The switching time should be short relative to the pulse build-up and depletion times. A saturable absorber provides an alternative passive Q switch: its absorption decreases as the intracavity intensity rises.

In mode locking, fixed relative phases between many longitudinal normal modes produce constructive interference during a short part of each optical resonator round trip. The round-trip time sets the repetition period. The available coherent gain bandwidth, the number of locked normal modes, the spectral phase, and residual group velocity dispersion determine the optical pulse duration.

For $M$ consecutive equally weighted normal modes of angular frequency spacing $\Delta \omega$, their wave amplitude sum is proportional toIts central peak has width of order $1/(M\Delta \omega )$, while its repetition period is $2\pi /\Delta \omega$. A transform-limited pulse therefore becomes shorter as more coherent gain bandwidth is used. This mechanism can give picosecond or femtosecond optical pulses: it does not require depletion of the whole stored population inversion during each peak, as Q-switching does. Mode locking generally accesses a much shorter time-bandwidth product scale than the gain-discharge time of Q-switching.

In Q-switching, hold the optical resonator's quality factor low while pumping builds population inversion, then rapidly reduce the loss. The stored excitation produces a large optical gain, the intracavity light intensity grows, and stimulated emission depletes the population inversion until the optical gain falls below the laser threshold. The resulting optical pulse is a transient discharge of stored excitation.

Its duration depends on the high-quality factor photon lifetime, initial population inversion, saturation dynamics and switching time. For example, a simple laser rate equation model iswhere $S$ is intracavity photon number, $N$ is the available inversion in compatible units, $R_p$ is the pump rate and ${\tau }_c$ is the photon lifetime. During the short discharge, pumping and upper-state decay can often be neglected. The build-up and depletion rates determine the width; there is no universal equality between the width and ${\tau }_c$. The initially stored energy and the output coupling also matter. Typical Q-switching produces nanosecond-scale optical pulses.

An electro-optic element whose birefringent retardance changes approximately linearly with applied voltage. Combined with a polarizer, it converts voltage-controlled polarization changes into variable optical loss for active Q-switching.

Q-switching creates a short high-energy optical pulse by first storing population inversion while an optical cavity has high loss, then increasing its quality factor so that stimulated emission rapidly extracts the stored excitation. Its duration depends on photon lifetime, excess optical gain, inversion depletion and switching time; it is not fixed by a universal time-bandwidth equality.

An element whose transmission increases as its absorption saturates. In a passive Q-switched laser it initially blocks oscillation, then becomes more transparent when the growing intracavity field bleaches the loss.

Absorption that decreases with increasing illumination intensity as the absorber's population distribution changes. It can provide an intensity-dependent loss for passive Q-switching.