Optical gain ($g$)

Optical gain is amplification of light by a medium. Here the small-signal intensity gain coefficient $g$ has units ${\mathrm{m}}^{-1}$: for fixed populations, a weak beam obeysin the nondegenerate resonant two-level model, with common transition cross-section $\sigma$. Thus $g$ includes the competition between stimulated emission and photon absorption on that transition. Separate passive intensity loss $\alpha$ gives $I(z)=I(0)e^{(g-\alpha )z}$. Both coefficients describe light intensity, not wave amplitude; the corresponding field-amplitude exponent is half as large. ^[ref].

For $g=0.30{\mathrm{m}}^{-1}$, $\alpha =0.10{\mathrm{m}}^{-1}$ and $z=0.50\mathrm{m}$, the single-pass intensity multiplier is $e^{0.10}\approx 1.10517$. This is amplification during one passage, before mirror losses. Population inversion can therefore yield positive optical gain while the complete oscillator remains below laser threshold.

A medium in which stimulated emission can increase an incident optical signal. Its unsaturated gain, saturation response and loss budget determine the propagation. A population balance with negative net gain instead describes absorption.

An open pumped two-level system amplifier with fixed upper-state source $R_2$, upper spontaneous emission only into the lower energy level, and lower-state removal rate $N_1/{\tau }_1$. Let $r=g_2/g_1$, $W={\sigma }_{21}I/(\hslash \omega )$ and $D=N_2-r{N}_1$. Steady rate equations give $N_1=R_2{\tau }_1$ and $D=R_2(1-r{A}_{21}{\tau }_1)/(A_{21}+W)$. Consequently the optical gain is $\alpha ={\alpha }_0/(1+I/I_s)$ with ${\alpha }_0={\sigma }_{21}{R}_2(A_{21}^{-1}-r{\tau }_1)$. Lower-state removal controls whether population inversion is possible, while its lifetime cancels from this model's saturation intensity. Different upper-state branching or a nonconstant pump generally changes that conclusion.

The frequency range over which an amplifying medium supplies appreciable optical gain. Its width must be stated with a gain-profile convention.

Narrowing of a pulse spectrum when the central frequencies receive larger optical gain than its wings. Phase correction alone cannot restore the suppressed spectrum.

In a simple two-mirror oscillator, laser threshold is the small-signal optical gain at which a resonant optical normal mode exactly replaces its round-trip intensity loss. Assume constant intensity coefficients $g$ and $\alpha$ throughout a one-way distance $L$, and mirror intensity reflectivities $0<R_1,R_2\le 1$. One round trip has multiplierTwo traversals give the distance $2L$; multiplying the two mirror factors completes the bookkeeping. Setting $M=1$ and taking a logarithm givesThe reflectivities here are intensity fractions, not field-amplitude reflectivities. A shorter gain region or nonuniform loss requires replacing the path exponent by the appropriate path integral. The balance also presumes a permitted resonant optical normal mode. ^[ref].

For $L=0.50\mathrm{m}$, $R_1=1$, $R_2=0.90$ and $\alpha =0.10{\mathrm{m}}^{-1}$, the threshold is $g_{\mathrm{th}}\approx 0.2053605{\mathrm{m}}^{-1}$. At $g=0.15{\mathrm{m}}^{-1}$, $M\approx 0.946144$: a small circulating signal decays even though the material has positive optical gain. At $g=0.30{\mathrm{m}}^{-1}$, $M\approx 1.099262$: the signal initially grows. Raising passive loss or lowering mirror reflectivity raises laser threshold.

For $M>1$, the fixed-gain recurrence predicts startup amplification, not infinite actual output. Growing light intensity depletes the available population inversion, reducing optical gain through saturation. In the simplest steady oscillator, the saturated round-trip gain balances loss and pumping supplies the outgoing power and dissipated energy. The small-signal model locates the onset; it does not determine the final output power. ^[ref].

The pump power or pump rate at which an optical resonator's gain first compensates its round-trip loss. It depends on the population balance, mode overlap and loss budget; it is distinct from an unqualified value of the material gain coefficient.

If $g$ and ${\alpha }_i$ are intensity gain and loss per length, a linear cavity has round-trip intensity multiplier $R_1{R}_2{e}^{2(g-{\alpha }_i)L}$. Threshold occurs when it equals one, giving $g_{\mathrm{th}}={\alpha }_i+\log [1/(R_1{R}_2)]/(2L)$. Phase resonance and the gain bandwidth determine which modes can oscillate.