Let , with categorical presheaf restrictions when . The five functors are
In all restriction maps are identities. In and , all nonidentity restrictions are the unique maps permitted by the displayed sets. These definitions are valid also when is empty: a restriction out of still has singleton target. Maps of sets act at the displayed -components, and natural transformations act on and by evaluation.
A natural transformation is determined by an arbitrary map , since all other source components are empty. A natural transformation is determined by its empty-open component : the component at must first restrict . Similarly, a natural transformation is determined by , followed by the restriction . Finally, a natural transformation is determined by , since all proper-open targets are singletons. These descriptions give the hom-set bijections
Thus the five adjoints for constant presheaves on open sets are
The values at the empty open set are genuine presheaf values here; no sheaf condition or sheafification is being imposed.
Define maps between the hom-sets by
Using naturality of the proposed counit of an adjunction and then the first triangle identity for an adjunction,
Using naturality of the proposed unit of an adjunction and then the other triangle identity for an adjunction,
Hence and are inverse bijections. They are natural in both variables: for and , the unit of an adjunction identity gives
This constructs an adjunction . Taking and recovers the prescribed unit of an adjunction and counit of an adjunction. Conversely, part (i) shows that any adjunction with those components must have exactly these transpose formulas. The adjunction exists and is unique with the prescribed unit and counit.
The two formulas for the adjunction transposes give both triangle identities for an adjunction directly. Apply the inverse bijection to the transpose of :
Apply the forward bijection to the inverse transpose of :
These are equalities of components of natural transformations, so
No cancellation assumption on either functor is needed: both identities follow from the inverse hom-set bijections.
Write the adjunction as the natural bijection
The unit of an adjunction and counit of an adjunction are the natural transformations whose components are
Naturality of the hom-set bijections gives, for and ,
For example, postcomposition by in the first hom-set corresponds to postcomposition by in the second, giving the first formula; naturality in gives the second. The same naturality says that, for and ,
Thus these components do define the asserted natural transformations and .
Apply the boundary-degree argument to each source cut component. It maps to one target cut component and is a homeomorphism on each of its boundary components onto distinct target boundary components. Its relative degree must be , so it meets the whole boundary of that target component. Since the global cut boundary map is one-to-one, two source components cannot map to the same target component; since it is onto, every target component is accounted for. Thus the cut components correspond bijectively, and each paired map satisfies the original hypotheses.
Induct on the remaining number of cuts in the chosen target three-manifold hierarchy, keeping fixed all boundary pieces already straightened. At the final stage the target components are three-balls. Each corresponding source component is irreducible with a single spherical boundary, and is therefore a three-ball by the inward-pushed-boundary argument above. Extend its prescribed boundary homeomorphism over the three-ball by coning. The original three-ball map and this homeomorphism are homotopic relative to the boundary: after identifying the target with a convex three-ball, take their straight-line homotopy. This establishes the induction base.
Reverse the cuts. On both copies of every cutting surface the two constructed maps agree with the fixed product homeomorphism of its collar, so the component homeomorphisms glue. Their homotopies also glue, because all cut boundaries have stayed fixed. Repeating through the three-manifold hierarchy gives
The proof derives the three-dimensional rigidity from the three-manifold hierarchy and the permitted surface-map straightening; it does not use the desired three-dimensional homeomorphism assertion as a quoted theorem.
Choose a connected proper incompressible surface with nonempty boundary as the first cut in a three-manifold hierarchy of . Homotope relative to into transverse position and let .
We first make incompressible. If is a compression disk for , its boundary maps to a loop in which is null-homotopic in . Since is fundamental-group-injective, this loop is null-homotopic in . Fill it in and alter in a small neighbourhood of so that its inverse image is obtained by compressing along . The alteration is a homotopy: the filling and the old disk give a sphere map in , which is null-homotopic by the asphericity proved above. A product collar of specifies the two sides of the modification. The integer decreases at every essential compression; sphere components can be removed separately. A resulting sphere component of bounds a three-ball in by three-manifold irreducibility; move the map of that three-ball to one side of to remove it. The required extension and homotopy exist because the higher homotopy groups of vanish. Continuing leaves an incompressible with no spherical components.
For each component , the map on fundamental groups to is injective. Indeed, its composition with the injection equals the composition of with the isomorphism . Both maps in the latter composition are injective. A closed nonspherical orientable cannot occur: its fundamental group would inject into , a free group, whereas every subgroup of a free group is free and a closed positive-genus surface group is not free. Thus every component of has boundary.
Apply the permitted surface-map homotopy result to , fixing its boundary. A fundamental-group-injective map of compact surfaces is homotopic either to a covering or, in the annulus case here, to a map into one target boundary circle. The exceptional annulus case is impossible: its two distinct boundary circles would map onto the same circle of , contradicting the injectivity of the original boundary map. If is a disk, injectivity makes each a disk, and the unique boundary circle directly gives a single disk homeomorphism. Otherwise each component is homotopic to a cover of .
Every point of has exactly one preimage on , since is a homeomorphism. Every cover component contributes its positive degree to the number of preimages on every target boundary circle. Thus there is exactly one component and its covering degree is one. We have proved that can be homotoped to a homeomorphism, relative to its boundary.
Extend this surface homotopy to , and use the two-sided collars to make a product homeomorphism on a neighbourhood of . The transverse normal direction is a degree-one local crossing, so the collars on its two sides match the two sides of ; any superfluous folds can be removed in the normal interval. We may now cut along and along , obtaining a map whose restriction to the entire cut boundary is a homeomorphism. The other hypotheses also survive: the cut manifolds are irreducible, have nonempty boundary, and the inclusion of every cut component into its uncut manifold is fundamental-group-injective by the normal form of the van Kampen theorem. A loop killed by the cut map is consequently killed by and hence is trivial in its source cut component.
First show that the boundary map is onto and has degree , and that the fundamental-group injection is actually an isomorphism. An injective map between closed surfaces is a homeomorphism onto an open-and-closed subset by invariance of domain. Thus each component of maps homeomorphically to a distinct component of .
Orient and , and write
Apply the boundary map in the relative homology sequence. The boundary of the right side has coefficient on every boundary component of . On the left, an image boundary component has coefficient or , and an omitted component has coefficient zero. Since at least one component is present, ; then no component can be omitted and all signs agree. Therefore
Let and lift to the connected cover corresponding to . If the cover were noncompact, then . The lifted relative fundamental class would have zero boundary, but its boundary is a nonzero sum of distinct boundary fundamental classes, since the original boundary map is injective and the boundary components are compact. This is impossible. The cover therefore has a finite number of sheets. Degree multiplicativity gives
Hence . The image of is the whole target fundamental group, and the assumed injection makes an isomorphism.
On the Kähler manifold define using the Kähler form; the operator is the adjoint Lefschetz operator, the pointwise contraction adjoint to wedging with . It lowers bidegree by . Set
and keep as above. These are the Hodge Laplacian and the holomorphic and antiholomorphic Laplacians respectively. The permitted identity among the Kähler identities gives . Expanding rather than assuming the desired anticommutation,
because . Hence .
Choose one projective line from each of two different pairs. They are skew lines by the preceding disjointness result. After a projective linear coordinate change call them
For , , their joining line meets the cubic surface at and a third point. This defines a rational map on the Zariski-open set where that third intersection is distinct and the joining line is not contained in .
More explicitly, because vanishes on both projective lines,
The third point is . Both polynomials are nonzero: if either vanished identically, one of the two projective lines would lie in the singular locus. Thus supplies a nonempty Zariski-open set.
Conversely, a point outside lies on the unique joining line whose endpoints have coordinates on and on . This is a rational inverse on the same generic locus. The rational parametrization of a cubic surface from two skew lines gives
The latter contains the affine plane as a dense open subset, as does . Hence is birational to .
Every projective line on the smooth algebraic surface through lies in the projective tangent plane , since its tangent direction is contained in the surface's Zariski tangent space. The plane section is a nonzero plane cubic. It cannot be the entire plane, since a smooth cubic surface is irreducible and has no plane component.
Each distinct projective line through is therefore a distinct degree-one factor of the cubic restricted to . A degree-three polynomial has at most three such factors. Hence there are at most three lines through any point. This is the lines through a point of a smooth cubic surface bound; equality is allowed when the tangent section consists of three concurrent lines.
The genus-degree formula gives
because the nonsingular plane cubic is already its own normalization of an algebraic curve. If it were birational to the projective line, the two smooth projective curves would have isomorphic function fields. The uniqueness of the finite normalization model of a one-variable function field would then make them isomorphic. But the projective line has genus of a smooth projective curve zero. Therefore the cubic is not rational. This obstruction works in the stated positive characteristics as well as in characteristic zero.
Choose a flex as , with tangent line . The flex coordinates for a smooth plane cubic give
The coefficient is nonzero because is not a component, and expresses smoothness at . Since the field characteristic is not two, the projective linear change
completes the square. The equation becomes after dividing by a nonzero constant, where is a degree-three homogeneous polynomial with nonzero coefficient.
On , the polynomial has three distinct roots in the algebraically closed field. A repeated root would make a singular point of , since both first partial derivatives vanish there. Put
A further nonzero scaling of absorbs the leading coefficient and ; the required square root exists in the algebraically closed field. These are projective linear changes of the original coordinates. Renaming the new coordinates gives the Legendre form of an elliptic curve
Its projective completion is , with the chosen flex at infinity.
Let define the nonsingular plane cubic and let be its Hessian curve of a plane cubic equation. The Hessian criterion for a flex applies in the allowed field characteristic. Here is the local calculation, so no characteristic-zero argument is needed.
Move any point to and its tangent line to . Smoothness gives a nonzero coefficient of , while the coefficients of and vanish. Thus
The intersection multiplicity with the tangent line is at least three precisely when , which is precisely because the field characteristic is not two. The tangent cannot be a component of a nonsingular plane cubic.
If vanishes identically, every point is a flex by this calculation. Otherwise it is a degree-three homogeneous polynomial. Its zero locus meets the cubic by Bézout's theorem; if they share a component, that also supplies a point of intersection. Every such point is smooth and satisfies the criterion, so a flex exists.
The genus-degree formula gives arithmetic genus three for a plane quartic. Each of its three double points has multiplicity of a plane curve at a point two, so the arithmetic genus drop under a point blowup is one at each point. The resulting integral projective curve has
For its finite normalization of an algebraic curve , the arithmetic genus identity is
Both terms are nonnegative, so . Over the algebraically closed field, the rationality of a smooth projective genus-zero curve identifies with the projective line: a point exists, and Riemann-Roch theorem gives a degree-one map from the two-dimensional space . Consequently is birational to . This proves the rationality of a plane quartic with three double points even when a double point is not an ordinary node.
Blow up the distinct singular points of the integral projective curve, once at each original point, and let be its strict transform of an algebraic subvariety. Write for the pullback of a projective line and for the algebraic exceptional divisors. The multiplicity of a plane curve at a point and the intersection formula for blowing up a surface give
The canonical divisor formula for a surface blowup gives . Applying the arithmetic adjunction formula on a smooth surface, rather than a formula requiring a smooth strict transform, yields
and hence
The strict transform of an algebraic subvariety is still an integral projective curve. Its arithmetic genus is , even if some singularities remain. Therefore the plane curve singularity multiplicity bound is
The argument uses only one blowup of a smooth algebraic surface at each original singular point; it does not assume these blowups resolve every singularity.
Choose homogeneous polynomials defining the two projective plane curves. Their absence of a common irreducible component makes them coprime. For a point outside both curves, they have degrees in and nonzero constant leading coefficients. The resultant
is therefore nonzero. Indeed, a vanishing resultant over would give a common factor there, and Gauss's lemma would give a common component of the original curves.
The homogeneity of makes a homogeneous polynomial of degree : scaling by scales their -roots by , and the product of the differences of roots scales by . Every point in the intersection projects from to a zero of in the projective line. Each such projection line contains only finitely many points of either curve, since it passes through outside them. Thus the intersection is finite already.
We may now choose also outside the finitely many joining lines of distinct intersection points. Projection is then injective on the intersection. A nonzero degree- homogeneous polynomial on the projective line has at most distinct zeros, so the resultant bound for intersections of plane curves gives
This derives the required cardinality bound without assuming the full intersection-multiplicity statement of Bézout's theorem.
Suppose a nontrivial finite group acts freely on by homeomorphisms. Choose a nonidentity element of finite order , a prime dividing , and the power of that element with exponent . It has order , so a subgroup also acts freely.
Let . A finite free action is properly discontinuous: around any point choose mutually disjoint neighborhoods of the finitely many orbit points, then intersect their inverse translates to obtain an evenly covered neighborhood. Thus is an -manifold with universal cover , which is contractible. The group-cohomology argument of Question 2 applies even if no cell structure has been chosen: singular simplices in lift to the cover, their lifts form free deck-group orbits, and the augmented singular chains of the contractible cover form an exact free resolution. Therefore
We calculate the right-hand side explicitly. Write , let generate , and set . The periodic resolution of a finite cyclic group is
Its exactness can be seen in coefficients. For , exactly when all are equal, giving . Also , so . If , then
Hence , proving exactness everywhere.
Apply with the trivial action. Multiplication by induces zero, and multiplication by induces multiplication by . The cochain complex is therefore
Its positive even-degree cohomology is
while its positive odd-degree cohomology is zero.
This contradicts the dimension of the quotient manifold. The noncompact form of Poincaré duality for noncompact manifolds, with the orientation local system when needed, is
Here Borel-Moore homology is the homology of locally finite chains. Its negative-degree chain groups are zero, so for , whether or not is orientable. Taking any contradicts the displayed cyclic group calculation. Thus
This proves finite groups cannot act freely on Euclidean space for general homeomorphisms; it does not assume that the action consists of affine maps or isometries.
Identify with the unit sphere in , and put . The generator of the cyclic group acts by
It preserves the sphere because . If its th power fixes a point, then for every . Some coordinate is nonzero, so , meaning . Thus the scalar root-of-unity action is free. The case is the trivial group and also satisfies freeness. The quotient is a standard lens space.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact