Use the instantaneous recycling approximation with a well-mixed gas reservoir, constant stellar yield , no gas inflow, and an irreversible galactic outflow. Let be the mass locked into long-lived stars and remnants after prompt recycling, and put . The yield is the newly synthesized mass of heavy elements returned to the gas per unit increase of . Thus in denotes the heavy-element mass in the gas, excluding metals already locked into stars.
Assume , , and ; initially pristine gas means . Take the outflow rate to be with constant , and assume its metallicity equals the current gas-phase metallicity . This is the well-mixed leaky-box model of galactic chemical evolution. The parameter is a mass-loading factor relative to the net rate of locking mass into stars. If a gross star formation rate and a prompt returned fraction are used instead, and a wind rate corresponds to .
Conservation of mass gives
and the baryonic mass remaining in the box is . Newly made metals enter the gas at rate , while pre-existing metals are locked into stars at rate and leave in the wind at rate . Hence
Using and the product rule,
The cancellation expresses the fact that a well-mixed wind removes gas and metals in the same proportion, while fresh stellar production raises the abundance in the remaining gas.
Divide this equation by along the evolving reservoir, or integrate in time through intervals with no star formation. The resulting gas-phase metallicity is
Equivalently, its fully explicit dependence on a prescribed net star formation rate is
valid while . With pre-existing stars, replace in the gas-mass relation by . Without specifying or a gas-consumption law, the model fixes as a function of gas mass but does not determine a unique function of time.
For the closed-box model of galactic chemical evolution, set . Then and
At the same remaining fraction of the initial gas reservoir, the leaky box has the logarithmic coefficient , lower than the true stellar yield by the wind factor. This coefficient is often called an effective yield, but the definition of the gas fraction must be specified.
In particular, the observable gas fraction of a galaxy is often , using the mass still present, rather than . In our initially star-free model,
Therefore
For and , the leaky-box enrichment is smaller at the same : . If effective yield is defined observationally as , it is consequently not simply the constant at all .
As an explicit time example, choose a linear gas-consumption law , with constant . The mass and metallicity equations give
The closed box with the same has the same metallicity at a given time, while the leaky box exhausts its gas faster. Thus a comparison at fixed time depends on the chosen star formation rate, even though the comparison at fixed gas fraction above is unambiguous.
Finally, the assumption about wind metallicity is essential. If the expelled gas has abundance instead, its metal-loss rate is , and the same bookkeeping yields
A wind enriched relative to the ambient gas lowers the enrichment rate; the logarithmic solution derived above applies to .
Use a stationary, non-streaming tracer population with spherical symmetry in its full velocity distribution. In particular, the mean velocities vanish, the mixed covariances vanish, and the two tangential components have equal velocity dispersions. Write
Here is the variance of one tangential component. In the alternative convention using the sum of both tangential variances, the same velocity-anisotropy parameter is . These definitions agree; they must not be mixed by inserting an extra factor of two.
The time derivative and mean-velocity terms in the supplied Jeans equation vanish, as do its angular mixed-moment terms. Its remaining geometric term is . Thus the Spherical Jeans equation becomes
The no-streaming assumption excludes a steady radial flow; stationarity of the density alone would not remove its advective terms.
By the shell theorem, the gravitational potential of a spherical mass distribution satisfies . Expanding the derivative above, dividing by , and using logarithmic derivatives gives
The tracer density need not be the density of the gravitating matter. The circular speed is , whether or not the tracers themselves follow circular orbits.
Now let be constant, , and . With , the Spherical Jeans equation reads
For a power-law ansatz , , so . Therefore the scale-free spherical Jeans solution is
The positivity condition is necessary for this particular solution to be a physical velocity dispersion.
There is a boundary condition implicit in selecting this solution. The integrating factor gives, when ,
The homogeneous term represents an additional radial-pressure boundary contribution. It is removed, for example, by requiring at infinity. Under that condition,
and convergence requires , giving the boxed result. If , the solution instead has the logarithmic form
so the quoted constant proportionality does not apply. A finite outer boundary can retain a homogeneous term even when .
To derive the heliocentric projection of a spherical velocity dispersion, put the Sun at vector of length , and a tracer at . Its heliocentric line of sight is
If is the angle between and the Galactocentric radial direction, then
After correction for the Sun's motion, the intrinsic covariance matrix has eigenvalues in the local spherical basis. Projection onto the line of sight therefore gives
At fixed , and are constant across the spherical shell. Averaging its squared line of sight velocity, with zero mean, gives
For a uniformly sampled Galactocentric shell, the solid angle measure makes uniform on , giving the geometric correction for heliocentric velocity dispersion
To evaluate it, set and , and divide the integrand:
The odd term integrates to zero, while . For , , and , this gives
The removable limit at is . As , , while as , . If , and the observed velocity dispersion is exactly radial. For isotropic velocities, , the correction vanishes at every radius.
The averaging measure matters. If directions are instead uniform in heliocentric solid angle at a fixed Galactocentric radius , let be the angle between the line of sight and . Geometry gives , so that particular weighting gives exactly. The logarithmic expression above uses uniform tracer weighting on a Galactocentric shell. For an observational sample, use its actual angular selection weights in ; the boxed dispersion relation remains valid.
Write for the constant hydrogen-ionizing photon production rate. Assume an initially neutral gas of hydrogen atoms, a sharp spherical ionization front, complete ionization inside it, and a fixed gas density. The electron and proton number densities inside are then both . Take the recombination coefficient to be constant, with the usual Case B recombination interpretation: photons from recombination directly to the ground state are absorbed locally. Neglect absorption by dust, pressure-driven gas motion, and light-travel delays.
The total rate of Case B recombination within radius is
At photoionization equilibrium, , giving the Strömgren radius
The square of the density appears because recombination requires encounters between an electron and a proton.
During Ionization-front growth of a Strömgren sphere, each photon either replaces an ion lost through Case B recombination or ionizes an additional atom. There are ions inside the ionization front, so photon counting gives
The recombination time is . Solving this first-order differential equation with gives
For an initial radius , the corresponding result is . Initially, the idealized photon-counting solution has ; at late times, . The initially divergent front speed in this approximation is a consequence of neglecting light-travel delays; the formula describes the growth once that approximation is applicable.
For a power law density, specify a reference radius so that . With an inner cutoff , the recombination integral for a power-law nebula is
Equivalently, a logarithmic interval in radius contributes . For , the central integral converges as , and the recombination rate grows as . At , each logarithmic interval contributes equally and the centre gives a logarithmic divergence. For , the unmodified profile gives a power divergence at the centre, while its outer recombination integral converges. The change at is set by the competition between the spherical volume element and the squared density.
To regularize the centre, choose the following explicit cored power-law density profile, taking and as the core density:
For , . For , put and integrate the core and envelope separately:
This rate is continuous and strictly increasing with . If , it has a finite supremum, the critical ionizing photon rate of a cored power-law nebula:
For there is a unique finite radius at photoionization equilibrium. At the equality is approached only as ; for even ionizing the whole profile cannot consume all photons through Case B recombination, so no equilibrium radius exists. For , the envelope integral grows without bound and there is no finite critical rate in this infinite-extent model.
For a concrete choice, take any , , and . Then . In the envelope, defining gives for , explicitly showing the divergence as the critical rate is approached. A different core shape changes the numerical coefficient of , while the outer-slope condition remains the same.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact