 Finite battery charge reservoir

A battery's charge reservoir means a finite amount of electric charge can pass through the external electrical circuit before its usable chemical state is depleted. It does not mean a large net electric charge is sitting inside the casing. For one net cell chemical reaction transferring $n$ Electrons per reaction event, an ideal reaction inventory obeyswhere $F$ is the Faraday constant and $\xi$ the extent of reaction in moles, assuming all the electric current serves that reaction. At fixed temperature and pressure, its reversible electromotive force obeys ${\Delta }_{r}G=-nF\mathcal{E}$: a decrease in Gibbs free energy provides the maximum reversible electrical work per mole. The electromotive force also depends on composition; the Daniell cell illustrates this with thermodynamic activity.^[ref]

As an original finite-reservoir exercise, stipulate usable $Q_{\max }=360\mathrm{C}$ and hold the preceding $3\mathrm{V}$, $1\Omega$, $4\Omega$ parameters constant until an abrupt cutoff. Then $t=Q_{\max }/I=600\mathrm{s}$, available electrical work is $\mathcal{E}{Q}_{\max }=1080\mathrm{J}$, load work is $V_L{Q}_{\max }=864\mathrm{J}$, and internal dissipation is $216\mathrm{J}$. This explicitly finite idealization predicts ten minutes, not an experimentally measured runtime. Real accessible charge depends on discharge conditions and the chosen terminal-voltage cutoff. Charge alone is also not an energy: converting it to delivered work requires the terminal electric potential difference throughout discharge.