Electrical resistance

Electrical resistance measures the electric potential difference needed to drive a given electric current through a component. For an Ohmic conductor under fixed material conditions, $R=V/I$ is constant and Ohm's law gives $V=IR$. The SI unit is the ohm, $1\Omega =1V/A$. At a fixed positive electric potential difference, increasing electrical resistance reduces electric current. Electrical conductance $G=1/R$ expresses the same response reciprocally. ^[ref].

For a straight uniform wire at rest, with constant electrical conductivity $\sigma >0$, length $L$ and wire cross-sectional area $A$, the uniform Ohmic conductor model givesThe electrical resistivity ${\rho }_{\mathrm{el}}$ characterizes the material; electrical resistance also includes geometry. Doubling length doubles $R$, while doubling wire cross-sectional area halves $R$, with material and temperature fixed. The uniform-field assumption includes insulated sides and equipotential end faces, as explained in uniform current in a straight homogeneous wire. ^[ref].

As a defined wire example, take $L=1\mathrm{m}$, $A=1\mathrm{m}{\mathrm{m}}^2$ and $\sigma =5\times 10^5(\Omega \mathrm{m}{)}^{-1}$. Then $R=2\Omega$; applying electric potential difference $5\mathrm{V}$ drives electric current $2.5\mathrm{A}$. With the same length and material, a second wire of wire cross-sectional area $2\mathrm{m}{\mathrm{m}}^2$ has $R=1\Omega$ and carries $5\mathrm{A}$ at that same electric potential difference. Fixing electric potential difference here differs from fixing electric current in the current density comparison: stating what is held fixed is essential.