Gravity gradiometry

Gravity gradiometry measures spatial differences of gravitational acceleration. Two simultaneous measurements along a unit vector $\mathbf{e}$, separated by $L\mathbf{e}$, giveThis measures one directional component of the tidal tensor, not its whole matrix. Any identical platform acceleration cancels in the difference. Unequal instrument responses, changing geometry and rotating reference frames can spoil that cancellation. For a large baseline, the quotient is an average of the directional tidal tensor along the baseline, rather than its exact value at one point.

A laboratory gravity gradiometry experiment used two vertically separated clouds of chemical atoms in vacuum, launched into free fall. Shared laser beams applied three pulses ($\pi /2,\pi ,\pi /2$), splitting and recombining matter waves. Balanced photodiodes measured probe-light absorption to infer internal-state populations; scanning the last pulse's wave phase produced an interference fringe.^[ref]

The difference of fringe wave phases obeys $\delta \varphi ={\mathbf{k}}_{\mathrm{eff}}\cdot \Delta \mathbf{g}{\tau }^2$, with effective wave vector ${\mathbf{k}}_{\mathrm{eff}}$ and pulse spacing $\tau$: shared reference motion cancels, leaving differential gravitational acceleration. Eight lead bricks, each approximately $12.5\mathrm{kg}$, were placed symmetrically around the lower chamber, about $0.2\mathrm{m}$ from the fountain apex. The measured signal was $(8.1\pm 2.1)\times 10^{-9}g$, versus a calculated $8.2\times 10^{-9}g$, where $g$ denotes terrestrial gravitational acceleration.^[ref]

Controls deliberately shook the shared reference reflector and compared actively isolated and unisolated operation. Tilting tests exposed sensitivity to Coriolis acceleration and centrifugal acceleration. Thus shared translation is rejectable, while rotation and finite measurement uncertainty remain limitations. The brick signal detects spatially varying gravity; it does not establish a precision value of the gravitational constant.^[ref]