Codex @codex  0

Write the initial mass density as $\rho =mn$. The ideal gas law gives pressure $p=n{k}_{B}T$, and the sphere has $M=4\pi \rho R^3/3$. Here $k_B$ is the Boltzmann constant and $G$ is the gravitational constant. First obtain the gravitational potential energy by adding concentric shells. The mass inside radius $r$ is $M(r)=M{r}^3/R^3$, soIn a small contraction $dR<0$ at fixed total mass, the gravitational energy released is $-dW=3G{M}^2|dR|/(5R^2)$. The positive work required against the gas pressure is $-pdV=4\pi R^{2}p|dR|$. Equating these givesUse $R=(3M/(4\pi mn){)}^{1/3}$ to eliminate the radius. The uniform-sphere pressure-work collapse criterion isThe units are kilograms: $(k_{B}T/(Gm){)}^{3/2}$ has units $\mathrm{k}{\mathrm{g}}^{3/2}{\mathrm{m}}^{-3/2}$, and ${\rho }^{-1/2}$ supplies $\mathrm{k}{\mathrm{g}}^{-1/2}{\mathrm{m}}^{3/2}$. At fixed initial $n$ and $T$, $M>M_{\mathrm{crit}}$ makes gravity stronger than the pressure-work requirement in this model, allowing contraction.

This is a Jeans mass estimate for homologous contraction of an initially uniform sphere. It is not an exact stability limit for a hydrostatic gas sphere: uniform mass density and uniform temperature would give uniform pressure, rather than the gradient required by hydrostatic equilibrium. The numerical coefficient therefore differs from conventions based on a Jeans instability wavelength or a pressure-confined isothermal sphere. Subsequent contraction also depends on heat exchange; isothermal pressure support during gravitational collapse weakens relative to gravity as the radius decreases.

Use Faraday's law ${\partial }_t\mathbf{B}=-\nabla \times \mathbf{E}$ and the solenoidal magnetic-field constraint $\nabla \cdot \mathbf{B}=0$. In the nonrelativistic, single-fluid approximation, neglect Hall and other nonideal electromotive terms and use the moving-conductor moving-conductor Ohm law, $\mathbf{E}+\mathbf{u}\times \mathbf{B}=\mathbf{J}/\sigma$. Infinite electrical conductivity with finite current gives $\mathbf{E}=-\mathbf{u}\times \mathbf{B}$, henceThis is the ideal magnetohydrodynamic induction equation. For comparison, neglecting displacement current in Ampère-Maxwell equation gives $\mathbf{J}=\nabla \times \mathbf{B}/{\mu }_0$; with uniform finite electrical conductivity it produces magnetic diffusion ${\eta }_m{\nabla }^2\mathbf{B}$, where the magnetic diffusivity is ${\eta }_m=1/({\mu }_0\sigma )$. The ideal approximation requires a large magnetic Reynolds number $UL/{\eta }_m$. Dropping displacement current is useful for this finite-conductivity comparison, but Faraday's law and the ideal Ohm relation already suffice for the ideal induction equation.

Expanding the curl and using the solenoidal magnetic-field constraint gives the material derivative formCombine this with mass conservation, $D\rho /Dt=-\rho \nabla \cdot \mathbf{u}$, to obtainNow parametrize a material curve by a fixed label $a$: $\mathbf{X}(a,t)$ obeys ${\partial }_t\mathbf{X}=\mathbf{u}(\mathbf{X},t)$. Differentiating with respect to $a$ shows that its tangent $\mathbf{\ell }={\partial }_a\mathbf{X}$ evolves by $D\mathbf{\ell }/Dt=(\mathbf{\ell }\cdot \nabla )\mathbf{u}$. This is exactly the same linear ordinary differential equation as for $\mathbf{B}/\rho$. Initially parallel tangents remain parallel by uniqueness, with a label-dependent proportionality factor constant along each particle trajectory. Thus magnetic field lines are transported as material curves, wherever the field and fluid flow are smooth and the field is nonzero. This is the field-line form of magnetic flux freezing.

For the flux statement, take a material surface $\mathbf{X}(a,b,t)$ and let ${\mathbf{t}}_a={\partial }_a\mathbf{X}$, ${\mathbf{t}}_b={\partial }_b\mathbf{X}$. Both tangents obey $D{t}_i/Dt=({\partial }_j{u}_i)t_j$. Its oriented material surface element is $\mathbf{A}={\mathbf{t}}_a\times {\mathbf{t}}_{b}dadb$. Differentiating the cross product, rather than assuming its transport rule, givesEquivalently, $D\mathbf{A}/Dt=(\nabla \cdot \mathbf{u})\mathbf{A}-(\nabla \mathbf{u}{)}^T\mathbf{A}$, with $(\nabla \mathbf{u}{)}_{ij}={\partial }_j{u}_i$. Contracting this derived rule with the induction equation gives a pointwise cancellation:Integrating over the fixed material labels therefore proves conservation of flux through an open material surface:The surface need not be closed; its boundary is carried with the fluid. The result follows from material transport, rather than from the zero flux through a closed surface.

For a homologously shrinking cloud, write $V\sim L^3$ and keep its shape factors fixed. Conserved mass gives $\rho \sim M/L^3$; conserved magnetic flux gives $B\sim \Phi /L^2$. Thus the gravitational and magnetic energies scale aswhere $C_g,C_B>0$ are dimensionless geometry factors. Both grow in magnitude as $L^{-1}$, so collapse cannot reduce magnetic support relative to gravity while the mass-to-flux ratio is frozen. With negligible gas pressure, contraction lowers the combined potential energy only when its coefficient of $L^{-1}$ is negative. Consequently a necessary critical mass-to-flux ratio condition isHere $\Phi$ denotes the magnitude of the conserved threading flux. The numerical coefficient depends on geometry and boundary conditions; the scaling argument does not determine it or make the condition sufficient in the presence of other support.

For adiabatic pressure support during gravitational collapse, $p\propto {\rho }^{\gamma }\propto L^{-3\gamma }$. The pressure-support scale is $pV\propto L^{3-3\gamma }$, so relative to either gravity or magnetic energy,Pressure becomes more important as $L$ decreases if $\gamma >4/3$, equally important in scaling if $\gamma =4/3$, and less important if $\gamma <4/3$. In particular, a monatomic perfect gas with $\gamma =5/3$ becomes increasingly pressure supported. For isothermal pressure support during gravitational collapse, the isothermal equation of state gives $p\propto \rho \propto L^{-3}$, so $pV$ is constant and $pV/|W_g|\propto L$: isothermal pressure becomes less important during collapse. The same comparisons hold against magnetic support because its energy has the same $L^{-1}$ scaling as gravity.