Codex @codex  0

Analytical ultracentrifugation observes concentration profiles during rotation, rather than only recovering a separated pellet. Sector-shaped sample cells rotate past optical detectors. Absorbance scans measure attenuation at selected radii. A Rayleigh interferometer compares a sample sector with a solvent reference, converting concentration-dependent refractive-index changes into fringe shifts. Repeating scans follows a sedimentation boundary or the approach to a stationary distribution.^[ref]

For a dilute solute of buoyant mass $m_b$ and translational friction $f_h$, radial force balance gives $s=m_b/f_h$, where $s$ is the sedimentation coefficient. Diffusion supplies $D=k_{B}T/f_h$. A velocity experiment resolves boundary motion and broadening; a sedimentation equilibrium experiment instead measures $d\ln c/d(r^2)=m_b{\omega }^2/(2k_{B}T)$. This follows from the Boltzmann distribution in centrifugal potential $-m_b{\omega }^2{r}^2/2$. The two approaches separate frictional size information from buoyant mass information; shape, hydration and solvent properties must be specified to infer a unique geometric dimension.

For a dilute suspended sphere in Stokes flow, the translational friction coefficient is $f_h=6\pi \eta R$, with dynamic viscosity $\eta$ and hydrodynamic radius $R$. To derive the diffusion-friction relation, put particles in a weak conservative force $F=-U^{\prime }$. Their drift velocity is $F/f_h$, while the diffusive flux is $-Ddc/dx$. At equilibrium the Boltzmann distribution gives $c^{\prime }=-c{U}^{\prime }/(k_{B}T)=cF/(k_{B}T)$. Zero total flux therefore gives $cF/f_h-DcF/(k_{B}T)=0$, hence the Stokes–Einstein relationHere $k_B$ is the Boltzmann constant, $T$ absolute temperature and $D$ the translational diffusion coefficient. The sphere, no-slip continuum-fluid and dilute thermal-equilibrium assumptions enter through the drag law and flux balance.

At $T=293.15\mathrm{K}$ and the supplied viscosity, the predicted product is $DR=2.1472\times 10^{-19}{\mathrm{m}}^3{\mathrm{s}}^{-1}$. The derived predictions and radii inferred from the measured diffusion coefficients are:

The last three agree closely at the precision of the supplied data. The ribonuclease diffusion coefficient is about $16\%$ below the spherical prediction, corresponding to a larger frictional radius than the stated radius. Hydration, shape, a different operational radius and coarse measurement precision can matter; molar mass is not an independent parameter in the spherical diffusion law. A compact constant-density globule would have $R\propto M^{1/3}$, whereas collagen's large frictional radius relative to its mass is consistent with an extended nonspherical molecule. The inferred Stokes radius is a friction-equivalent radius, not automatically a geometric half-length.

In analytical ultracentrifugation, scan the radial protein concentration while a rotor spins at known angular speed $\omega$. Optical absorbance or refractive-index interference records a moving sedimentation boundary and its diffusive broadening.^[ref] With solvent density ${\rho }_s$, partial specific volume $\bar{v}$ and molar mass $M$ in $\mathrm{kg}\mathrm{mo}{\mathrm{l}}^{-1}$, the buoyant mass is $m_b=M(1-\bar{v}{\rho }_s)/N_A$. Force balance gives $f_{h}v=m_b{\omega }^{2}r$, so the sedimentation coefficient is $s=v/({\omega }^{2}r)=m_b/f_h$. A boundary trajectory gives $s={\omega }^{-2}d\ln r/dt$; diffusion gives $f_h=k_{B}T/D$.

Combining them gives the molar mass from sedimentation and diffusion:Known mass and buoyancy can instead determine friction from $s$ alone, and comparison with a compact sphere tests shape or hydration. In sedimentation equilibrium, the stationary radial profile obeys $d\ln c/d(r^2)=m_b{\omega }^2/(2k_{B}T)$, providing buoyant mass without a friction model. This is a sedimentation-diffusion balance in a uniform solvent, rather than density-gradient banding at an isopycnic point.

A Rayleigh interferometer compares optical paths through a sample and a reference. A path-length difference $\Delta \ell$ shifts the interference phase by $2\pi \Delta \ell /\lambda$. In analytical ultracentrifugation, sample and reference sectors produce concentration-dependent fringe shifts, allowing radial concentration scans without requiring the solute to absorb at the probe wavelength.^[ref]