All four interacting waves have the same frequency. Counterpropagating equal-frequency pumps can give a source proportional to the conjugate signal field, providing phase conjugation. The pump product must have the appropriate uniform spatial phase, and finite apertures and phase mismatch limit reconstruction.
The distance over which a constant phase mismatch accumulates phase difference . In unseeded, undepleted sum-frequency generation, the generated intensity first reaches a maximum at this length and returns to zero at . This length concerns relative phases of interacting waves, rather than the temporal optical coherence length of one source.
The polarization generated by the relevant third-order nonlinear optical susceptibility is proportional to . Multiplication of its temporal and spatial wave phase factors gives
The two opposing pump arrows in the original diagram mean . Thus the mixing source points along , and its conjugate signal amplitude drives a backward field. This is counterpropagating-pump phase matching in four-wave mixing.
There is a phase matching qualification to the initial frequency statement. In the stipulated nondispersive isotropic medium, . Exact equality of the backward free-wave vector to therefore requires , hence . For unequal frequencies the backward direction remains the geometry suggested by the source, but the longitudinal phase mismatch has magnitude . Efficient generation over a finite length requires that mismatch times be small; a sinc function factor suppresses conversion otherwise. Nondispersion does not remove the magnitude mismatch. The remainder of the calculation is explicitly degenerate four-wave mixing, so this difficulty disappears.
At the pump frequency, for the strong field , self-phase modulation and cross-phase modulation by dominate the weak signal's influence. They change its propagation wave phase through its own intensity and the other pump's intensity. With continuous uniform plane waves, these are nonlinear wave phase shifts; finite pulses acquire temporal chirp, and finite transverse beams can acquire a lens. No universal factor of two should be assigned between the two shifts without specifying their polarization contraction and the field-amplitude convention.
Write and . Differentiating the exponential substitutions cancels the terms proportional to :
Consequently and . Conjugate the latter before eliminating a field: , so . The backward four-wave-mixing boundary problem requires opposite-end boundary conditions: , where , and . The transfer matrix is
At , , so . Substitution gives
The printed target expression for has the opposite overall sign. This is present in the original PDF, not just the transcription. With its stated first-order equations, the derivative at the far face must be . The boxed result has that derivative; the printed expression has its negative. Reversing the convention for the mixing coefficient could reverse the generated phase, but would also change the coupled equations. The result above satisfies the equations and both boundary conditions together.
At the entrance, , so the returned amplitude is proportional to the complex conjugate of the signal. An ordinary ideal mirror gives , with a fixed reflection coefficient , rather than . The mixing pumps supply both the extra energy and a wave phase reference. The ideal conjugate reflectivity and signal transmission are
The constancy of along the medium is another direct check. The relation between the incoming signal and outgoing waves allows net output energy to come from the pumps. As , the undepleted-pump approximation fails: the predicted fields would extract an appreciable pump fraction. This is the ideal four-wave-mixing oscillation threshold; saturation, pump depletion and noise seeding replace the divergent linearized solution. It is not an unlimited source of reflected power. Amplified phase-conjugated propagation and parametric oscillation are also the effects identified in the primary analysis by Amnon Yariv and David M. Pepper.[ref]
Figure 1.
Calculated backward-wave profiles, ideal gain, and cancellation of an original phase-screen example
. Details.
For the aberrating linear medium, assume its permittivity is real and stationary at this frequency. Taking the complex conjugate of the forward-envelope equation gives
This is the backward-envelope equation with carrier . Launching the conjugate boundary field therefore permits retracing of the distorted wave. In a transverse lossless phase screen model, let transmission be . A return proportional to acquires on its second passage and becomes . Thus the aberration phase cancels. A mirror instead gives , adding the aberration twice; merely reversing the central propagation direction does not reverse the wavefront phase.
The one-dimensional printed equation describes longitudinal variation; genuine transverse aberrations require the corresponding transverse Helmholtz equation or paraxial operator, for which the same real-coefficient conjugation argument applies. Exact reconstruction requires adequate aperture, the correct conjugate amplitude and polarization, uniform pump-product phase, and an unchanged reciprocal lossless medium. Absorption, missing scattered modes or a changed aberrator prevent a universal reconstruction. This is phase conjugation and thin phase-plate cancellation by phase conjugation under specified conditions, rather than reversal of every possible propagation loss.
The process is sum-frequency generation, with . The same reversible three-wave mixing interaction permits the reverse conversion when the higher-frequency field supplies the pump. The second-order nonlinear polarization couples the three waves; its effective coefficient includes the crystal orientation and polarizations.
One efficiency limit is phase mismatch: contributions generated at different positions acquire different phases and can cancel. A second practical limit is spatial walk-off, which reduces the overlap of finite beams in a birefringent crystal. A beam radius and relative walk-off angle give an overlap length of order . Absorption and scattering provide further losses. Group-velocity mismatch matters for pulses, and pump depletion eventually invalidates an undepleted-pump calculation; none of these effects should be silently included in the ideal lossless plane-wave equations.
Define and hold constant. Direct integration of the driven equation gives
where . The second expression has a continuous phase-matched limit. If the generated field is initially absent,
For this is proportional to : the first maximum is at the nonlinear optical coherence length , and the first subsequent zero is at . A seed adds interference with the generated amplitude and can change that pattern. At exact phase matching, the unseeded result grows as only while pump depletion remains negligible.
Figure 1.
Unseeded sum-frequency intensity with nonzero phase mismatch and undepleted pumps
. Original ideal-model calculation normalized to its first maximum. The crystal length is chosen as four coherence lengths; no measured conversion efficiency is implied. Details.
To retain depletion consistently, differentiate each intensity before inserting the coupled equations:
For real in the lossless convention, put . The result is
The signs follow the printed amplitude equations. In initial up-conversion, the newly generated makes , so the two input intensities decrease while the sum-frequency intensity increases. Adding the derivatives gives zero because . The total intensity is conserved, even though the three individual intensities change.
The Manley-Rowe relations are
Dividing an intensity by gives photon flux density. A conversion event removes one photon from each lower-frequency mode and adds one to the upper mode, or does the reverse. Therefore and count conserved sums of photon fluxes, while counts the conserved lower-frequency difference. They are not three independent invariants: . Energy conservation is also recovered as .
The unweighted combinations generally fail because the exchanged photons have different energies. Explicitly,
The qualification “generally” matters: is conserved for equal lower frequencies in a distinct-mode degenerate case, and every derivative vanishes when there is no exchange. The equations establish nonconservation for generic unequal-frequency interaction, not for all special solutions.
Quasi-phase-matching 2026-10-20
Compensation of phase mismatch by a spatial modulation of the coupling coefficient. Write . The driven amplitude contains , so the selected Fourier component accumulates coherently when . For first-order compensation the full spatial period is , twice the nonlinear optical coherence length.
An ideal equal-duty pattern alternating and has first Fourier coefficient of magnitude . Hence its conversion intensity is of a uniformly phase-matched crystal using that same coefficient, under the same undepleted plane-wave assumptions. The modulation can nevertheless allow a larger tensor coefficient or an otherwise inaccessible wavelength. Periodically poled lithium niobate implements such sign reversals using ferroelectric domains.
Spatial walk-off 2026-10-20
Loss of spatial overlap between interacting finite beams because their energy flux directions differ. In an anisotropic crystal, the direction of the Poynting vector need not coincide with the wave vector. For beam radius and relative walk-off angle , an overlap length is of order . A full conversion calculation also includes beam profiles, diffraction and phase mismatch.
Sum-frequency generation 2026-10-20
A nonlinear optics process producing a field at the sum of two input angular frequencies. The driven electric polarization contains a term proportional to the product of the input complex amplitudes. With undepleted plane-wave inputs, integration along a crystal gives an output amplitude proportional to ; the sinc function therefore determines the ideal length and phase mismatch dependence. A nonzero initial output field also interferes with this generated field.