Aperture

An aperture is an opening that admits light into or through an optical instrument. Its shape and size select the transmitted light rays; an aperture alone does not bend them as an optical lens does. The aperture stop is the opening that most restricts the bundle from an on-axis object point. The entrance pupil is the image of that aperture stop formed by the preceding optical lens elements, viewed from the object side. Consequently the effective collecting diameter $D$ is the entrance pupil diameter, which can differ from the physical hole's diameter. For example, preceding optical lens elements that enlarge a $10\mathrm{mm}$ aperture stop by a factor of two give $D=20\mathrm{mm}$; measuring the physical hole alone would misidentify the focal ratio. ^[ref].

For an unobscured circular entrance pupil under a uniform beam normal to its plane, the collecting area and admitted radiant flux arewhere $E_{\mathrm{pupil}}$ is incident irradiance. Doubling $D$ quadruples admitted radiant flux. Obstructions, nonuniform illumination and losses after the entrance pupil require the actual illuminated area and transmission to be included. The same $D$ also sets an angular diffraction-limited resolution scale $\lambda /D$ at wavelength $\lambda$. Collection and diffraction therefore answer different questions from field of view: an aperture selects the bundle from each object point, while the receiving plane's extent helps select which object directions appear in the image.

NASA/JPL's published pinhole demonstration uses two white cards, foil taped over a window in one card, and a small hole pierced in the foil. Sunlight passes through the hole onto the second card; the projected image is viewed on that card. The activity describes a larger image when the card separation increases, improved visibility when the receiving card is shaded, and a separate image from each of several holes. These are qualitative observations of image formation, rather than calibrated measurements of radiant flux or diffraction. ^[ref].

A proposed quantitative extension replaces sunlight by a steadily illuminated asymmetric target and puts the foil and a translucent receiving screen in a dark box. Record target distance $u$, hole-to-screen distance $b$, hole diameter $d$, image height, orientation and edge blur. Measure screen brightness with a fixed photodetector, or record the screen with an optical camera whose integration time and gain stay fixed. Exchange centred foils of measured $d$ at fixed $u,b$; then vary $b$ with the same foil. Geometrical optics predicts an inverted image with transverse magnification $m=-b/u$ and a point's geometric blur diameter $d(1+b/u)$. Thus a larger hole admits more radiant flux without changing the central image scale, whereas increasing $b$ enlarges the image. These are predictions to test, not reported data. Keep target illumination and detector position fixed, subtract a hole-covered dark reading, repeat the original foil to check drift, and avoid clipping the detector response. Foil thickness and ragged edges can block oblique light rays; at sufficiently small $d$, diffraction invalidates the claim that ever smaller holes always sharpen the image. A lensless optical camera has no optical lens focal length: $b$ is a propagation distance, not that focal length.

An optical pinhole is a small aperture used to select a narrow part of a beam or approximate an optical point source. Its finite diameter and diffraction limit that approximation; an illuminated optical pinhole at a collimator's optical focus supplies a narrow bundle of nearly parallel light rays.

An aperture stop is the physical opening that limits the angular cone of rays from an on-axis object point. Its images through preceding and following optics are the entrance and exit optical pupils; it differs from a field stop, which limits the extent of the imaged field.

An optical pupil is an image of the aperture stop. The entrance pupil is its image viewed through optics before the stop; the exit optical pupil is its image through the optics after it. optical pupil reimaging maps the telescope aperture onto devices such as a deformable mirror.