Photodiode operating mode

Photovoltaic mode uses no external reverse bias: a transimpedance amplifier can hold zero terminal electric potential difference, while an open electrical circuit develops a photovoltage. Photoconductive mode biases the diode cathode positive relative to the diode anode, generally reducing junction capacitance and increasing speed and dark current.^[ref]

A simple calculation separates the readout from the conversion. If a linear transimpedance amplifier has feedback electrical resistance $R_f=1.00\mathrm{M\Omega }$, the $650\mathrm{nm}$ model above produces an output change of magnitude $R_f{I}_{\mathrm{ph}}=0.393195\mathrm{V}$. The output sign depends on the connection. Increasing $R_f$ increases that electric potential difference, but does not create more collected charge carriers.

For a reverse-biased photodiode feeding an electrical load $R_L$, Ohm's law gives a readout magnitude $V_L\simeq I_{\mathrm{ph}}{R}_L$ while the response remains linear. With negligible dark current and other series drops, the remaining reverse bias is $V_R\simeq V_b-I_{\mathrm{ph}}{R}_L$, where $V_b$ is the supply magnitude. Thus the chosen electrical load can consume the available bias: a larger readout does not automatically reduce measurement uncertainty. For the same constructed example, $V_b=5\mathrm{V}$ and $R_L=1\mathrm{M\Omega }$ leave about $4.60680\mathrm{V}$; this algebra alone does not establish a real device's linear range.