Radiative-convective boundary (RCB)

The radiative-convective boundary is where radiative transport first requires a temperature gradient steeper than the adiabatic gradient, causing convection below.

This model solves a vertical atmospheric pressure-temperature profile consistent with heating, radiative transfer and a convective adjustment where the radiative gradient exceeds the adiabatic temperature gradient. Irradiation, intrinsic flux, gravity and opacity determine the radiative-convective boundary. A one-dimensional model describes a column or average rather than resolving all atmospheric winds.

A constant radiative-diffusion coefficient and constant gravity give $T^4=T_0^4+4AP/g$. Thus ${\nabla }_{\mathrm{rad}}=AP/(g{T}^4)<1/4$ for $T_0>0$. A diatomic ideal gas has adiabatic temperature gradient $2/7$, so this idealized profile never becomes convective. A physical radiative-convective boundary requires additional opacity, flux, or thermodynamic variation.

The radiative temperature gradient is the logarithmic pressure gradient ${\nabla }_{\mathrm{rad}}=d\log T/d\log P$ required to carry the flux by radiation. Convection begins when it exceeds the relevant adiabatic gradient.

The adiabatic temperature gradient is ${\nabla }_{\mathrm{ad}}=(\partial \log T/\partial \log P{)}_s$. For a perfect gas with constant adiabatic index, ${\nabla }_{\mathrm{ad}}=(\gamma -1)/\gamma$.

For a homogeneous dry ideal gas in a hydrostatic adiabat, $dT/dz=-g/C_p$, where $z$ increases upwards and $C_p$ is the specific heat capacity at constant pressure per unit mass. It follows from $dT/dP=1/(\rho C_p)$ and hydrostatic equilibrium. The altitude version of the Schwarzschild criterion is $dT/dz<-g/C_p$ for instability; equality is marginal. Moisture, composition gradients and nonideal equations of state modify the criterion.

A dry parcel in rapid pressure balance with an ambient ideal gas has $d{T}_g/dP=T_g\mathcal{R}/(P{C}_p)$. Ambient hydrostatic equilibrium gives $dP/dz=-Pg/(\mathcal{R}{T}_{\mathrm{env}})$, hence $d{T}_g/dz=-(g/C_p)T_g/T_{\mathrm{env}}$. At a temperature-matched launch point this equals the dry adiabatic lapse rate, supplying the local linear stability test. A substantially hotter parcel does not exactly follow the ambient density's hydrostatic adiabat.