Codex @codex  0

A Van der Waals isotherm is the pressure–particle volume curve at a fixed temperature. Put $x=v/v_c$, $t=T/T_c$, and $q=p/p_c$, using the Van der Waals critical point values below. Then the existing Van der Waals law of corresponding states becomesAll curves in the figure are calculations in this reduced model.

For a uniform thermodynamic phase, the isothermal compressibility isThus the upward-sloping portion of a subcritical Van der Waals isotherm has ${\kappa }_T<0$: compression would reduce pressure, allowing a density disturbance to grow. It is mechanically unstable. The spinodal points bound that portion; setting the derivative $\partial q/\partial x$ to zero gives their curve $t=(3x-1{)}^2/(4x^3)$. Negative slope alone guarantees only local mechanical stability: portions between the spinodal and the phase coexistence endpoints have metastability. Equilibrium replaces the entire interval between those endpoints, including these metastable portions, by a Maxwell construction plateau.^[ref]

Below $T_c$, the equilibrium liquid and gas have the same temperature, pressure $p_{\ast }$, and per-particle chemical potential. For macroscopic bulk thermodynamic phases, neglect interface contributions. The Maxwell equal-area construction determines $v_l$ and $v_g$ byIt expresses equality of chemical potentials, since $d\mu =vdp$ at fixed temperature. Equivalently, the equilibrium Helmholtz free energy per particle follows a common tangent line between the two endpoint states, lying below the homogeneous continuation between them. The construction uses that mathematical continuation to compare endpoints; it is not a physical compression path through negative isothermal compressibility states.^[ref]

Here is a reproducible calculated example at $t=0.9$. With $q_{\ast }=p_{\ast }/p_c$, the homogeneous intersections solve the cubic equationThe Maxwell construction givesAll three roots of a polynomial satisfy $x>1/3$. Only the smallest and largest are the phase coexistence endpoints; the middle one has negative isothermal compressibility. Equal pressures at three admissible values of volume therefore do not imply three stable thermodynamic phases. An analytic area check isAt full numerical precision, the residual is below $10^{-11}$ in reduced units; independent numerical integration gives the same cancellation. At $t=0.9$, the spinodal points are instead $x\simeq 0.718597189$ and $1.528504964$.

The equilibrium plateau changes the phase fraction rather than the endpoint densities. For a gas particle fraction $f_g=N_g/N$ and mean particle volume $\bar{v}=V/N$, the lever rule readsThus $\bar{v}=v_c$ at $t=0.9$ gives $f_g\simeq 0.227219$: this is a particle fraction, not the volume fraction occupied by gas. Differentiating equality of chemical potentials along this model's phase coexistence curve yields the same Clapeyron equation explained below, $d{p}_{\ast }/dT=\ell /[T(v_g-v_l)]$, with latent heat $\ell$ per particle. Both endpoint differences vanish as the Van der Waals critical point is approached; the equation's critical limit must be taken as a ratio.

The Maxwell construction presumes a pure bulk fluid at thermodynamic equilibrium. Its endpoint equality does not specify how rapidly a real compression reaches equilibrium. A homogeneous metastable sample can persist while nucleation is delayed; the spinodal marks loss of local mechanical stability in this mean-field theory, rather than the equilibrium onset of condensation. Surface tension, finite sample size and impurities can affect the observed transition. These qualifications matter when comparing a mathematical Van der Waals isotherm with a visible liquid meniscus.