Cycling clothes Updated 2024-12-15 +Created 1970-01-01
View more
2024-11: OK, I give up, going to try and find the Extremities XDRY again, as these are the perfect gloves for the UK. Buying www.amazon.co.uk/dp/B00OISFUQ4. Their marketing is very confusing and there are several different names for the product, but the label reads "extremities insulated waterpoof sticky power liner glove", black, large. This is the official page: www.terra-nova.co.uk/products/insulated-waterproof-sticky-power-liner-gloves X-Dry Stretch, 100% polyester.
2024-10: going to try Endura Men's Strike Glove - Hi-Viz Yellow, Large www.endurasport.com/strike-glove-hi-viz-yellow/12929542.html | www.wiggle.com/endura-strike-gloves-930526#colcode=93052613. These gloves are high quality, but they are too hot and fleecy for the UK, unless it is an exceptionally cold winter day around 0. This means that they get quite wet from sweat, and they are not that breathable. Also they are very hard to take off and put on, which is painful if you are like me who uses your cell phone for navigation, and while it works with touchscreens, sometimes it's just too annoying and you have to take them off.
2024-05: going to try www.sealskinz.com/products/water-repellent-all-weather-glove Sealskinz Tasburgh Water Repellent All Weather love black large because Extremities XDRY has a hole on right thumb due to gear shifting. This glove is very similar to the Nike academy hyperwam, not really a winter glove feels like. Weird branding...
2023-11: Endura Windchill Bibtights XL - Black: www.endurasport.com/windchill-bibtights-black/12926004.html because knees of dhb one open. I'm an idiot for getting XL... it's just that L felt too short on the top. But ultimately XL was too baggy, this became quite apparent on first usage, L would likely have been better, just would have needed to pull it a bit more. Quality is very good, very water repellent, kept me warm on 2C under very light rain. Also tried www.endurasport.com/xtract-bibtight-black/12926142.html but the sizing was completely different. L on that one as obviously too large, M felt correct.
2023-07: lost my waterproof cap, not cycling specialized, but was useful. Was by itself in crappy backpocket of cheap muddy fox jersey, lots of wind, some fence jumping... Hadn't noted know the brand/model... sad. Let's try Castelli A/C 2 Cycling Cap? www.castelli-cycling.com/US/en/Men/Collection/Hot-Weather-Kit/A-C-2-CYCLING-CAP/p/4523032_008 Single size. Slightly small, but hard to be sure.
2023-07: www.dhbsport.com/products/aeron-short-sleeve-jersey-2-0 dhb Aeron Short Sleeve Jersey 2.0 Colour Ink Blue Size (Standard) L. To prevent crap from falling again hopefully. Felt too small. Material: 100% polyester, inserts, 64% polyester, 6% elastane. Compared to the non 2.0 which I have, the material feels more glossy/slippery. Slightly weird.
2022-05: buying another "dhb Lightweight Mesh Long Sleeve Base Layer", small www.wiggle.com/p/dhb-lightweight-mesh-long-sleeve-base-layer. I notice that it is actually a bit not long enough. Doesn't make a huge difference, but maybe medium or large next time.
2022-12 Rohan Polar Gloves, black, large, 45 pounds. Shell: 85% polyamide, 15% elastane. Insulation: 100% polyester. 100g insulation on back of the hand. www.rohan.co.uk/mens/accessories-polar-gloves Let's see how they perform after hands were very cold on a bike ride with the Extremities XDRY.
2022-08 dhb Aeron Short Finger Gel Gloves 2.0 medium white www.wiggle.co.uk/dhb-aeron-short-finger-gel-gloves-20. For sun/fall protection. In theory should be small according to size guide, but small was over, and I have my doubts it is correct.
2021-12: bought a North Face etip recycled gloves black with white signs, large about 40 dollars: www.thenorthface.co.uk/shop/en-gb/tnf-gb/mens-etip-gloves-4sha?variationId=KY4 let's see how that goes.
2021-12:
  • dhb Windproof Cycling Gloves Small Black 33 dollars to replace the Nike academy hyperwam gloves which I lost a pair of recently. It already had a hole in the thumb anyways from shifting the small gears all the time. S was way too small despite me making hand measurement, returned.
  • dhb C1.0 Crossover Helmet Matte Black 58-61cm 40 dollars after recent crash to ensure helmet integrity
2021-06: Castelli UPF 50+ Light Arm Sleeves (Skins) Large White, 29 pounds www.castelli-cycling.com/bg/upf-50-+-light-arm-sleeves/p/451603621P-001. Felt really good. Really does not trap much heat, and completely blocks off sun. It makes you develop a small layer of sweat that keeps you cool, cooler than without the sleeves.
2021-02 Castelli PRO THERMAL SKULLY red www.wiggle.co.uk/castelli-pro-thermal-skully www.castelli-cycling.com/gb/pro-thermal-skully/p/452054220A to help with cold, the X Lite Run Black Headband is just not made for winter.
2021-01: Madison Cycle Everywear Sportive Toe covers. L/XL. www.madison.cc/shop/sportive-thermal-toe-covers/VARCLA121/CLA12104
2021-01: "Endura FS260-NEMO Glove II" Neoprene Winter Handwarmer Large. www.endurasport.com/Gants-Nemo-FS260-Pro-II/p/E1216-Black Let's see how neoprene feels like. Basically it becomes wet with your transpiration, but is still relatively warm, would take it well down to 5C. Likely would work well with heavy rain. Not bad. But does feel a bit cooler than the Extremities XDRY, especially after you walk for a bit, and your hand becomes cold, and it is very hard to warm it because it is also wet.
2020-12-21: "dhb Neoprene Nylon Overshoes" www.wiggle.co.uk/dhb-neoprene-nylon-overshoes large black. After 2 rides, noticed that the front lower part of left foot (the one I put on and off the most) had a hole in it, not sure where it was made. Edit: I later noticed that it is because I have the reflex of braking slightly with my shoes in certain conditions, e.g. at lower speeds in close proximity to pedestrians, the sounds of which also serve as a way to alert them without the need for a loud bell. But it destroys the overshoe, so I have to undo that reflex.
2020-11-06 www.alpinetrek.co.uk/castelli-perfetto-ros-long-sleeve-cycling-jersey/ "Castelli Perfetto RoS Long Sleeve - Cycling jersey" size L Large. On Wiggle: www.wiggle.co.uk/castelli-perfetto-ros-long-sleeve-jersey Feels great. Together with the dhb Merino Long Sleeve Base Layer, I can gown down to 0 Celcius, no problem, and up to 14 with the "Mesh Long Sleeve Base Layer". Breathes great, blocks wind and rain reasonably, and can holds mild rain out on a short 1.5h ride without problem. I used this so much it is unbelievable.
2020-10-17:
  • last ride top was a bit cold on shoulders where not covered by arm warmers, about 10C, so going to try: www.wiggle.co.uk/dhb-aeron-rain-defence-polartec-jacket-1 "dhb Aeron All Winter Softshell Jacket", 109.25 pounds, Fluro Yellow, small to match previous tops that worked, approx: 50 polyester, 40 polyamide, 10 elastane, recommended temperature: 2-12 degrees Celcius. Material felt OK, not amazing but OK. Returned because a bit too small.
  • the "dhb Classic Thermal Bib Tights" is a bit too warm for lower tens, so going to try "dhb Aeron FLT Roubaix Bib Tight", 85.50 pounds, medium, navy color, recommended temperatures: 6-14 deg C, 84% polyamide, 16% elastane. Hopefully not being marked as "thermal" means it is less warm. Also hopefully being DHB Aeron it will be a bit less baggy behind knees. Returned later because felt indistinguishable from the "dhb Classic Thermal Bib Tights".
For sizing see also: Ciro Santilli's body.
2020-11: Castelli Thermoflex 2 Arm Warmers, Large, 28 pounds: www.wiggle.co.uk/castelli-thermoflex-2-arm-warmers | www.castelli-cycling.com/gb/men/accessories/cycling-leg-and-arm-warmers/p/451953020A-010 advertized 8°-20°C. Was going to buy the DHB ones for 10 pounds less, but always out of so Castelli it is.
2020-08: started getting getting cold, so let's do it:
2020-05 www.wiggle.co.uk/dhb-aeron-short-sleeve-jersey-4/ dhb Aeron Short Sleeve Jersey 100% polyester, Red Large. This one fit OK. Length feels right. When on cycling position, a bit baggy under arms though, but guessing M would be too short? Still already feels less baggy than the cheap muddy fox jersey. Aeron is the second lowest level of DHB top, after the super basic 25 pound one. Material is thin polyester, could be better, but OK.
2020-05 www.wiggle.co.uk/castelli-perfetto-light-2-short-sleeve-jersey/ Castelli Perfetto Light 2 Short Sleeve Jersey 84% Nylon, 16% Lycra. When it arrived, was WAY too small, so returned. Material looked and felt amazing.
2019-12 www.wiggle.co.uk/dhb-merino-long-sleeve-base-layer-1/?sku=5360752872 "dhb Merino Long Sleeve Base Layer", black, small, was right size, wool is a bit itchy, but does feel like it dries off more quickly on long rides than the cheap Muddy Fox polyester cycling Jersey. Pretty warm, too much for 15C.
2019-12 www.wiggle.co.uk/dhb-aeron-winter-weight-merino-sock/?sku=100335580 dhb Aeron Winter Weight Merino Sock, blue, UK 9.5-12. Did not seem to make much of a difference, feet still cold, not wet.
2019-11 Nike academy hyperwarm gloves: www.nike.com/gb/t/hyperwarm-academy-football-gloves-s9Dd8D/GS0373-013 (archive) for 17.99 Pounds from physical retailer. Good intermediate between the Extremities gloves when it gets a bit warmer. 60% polyester/27% nylon/5% rubber/4% elastane.
2019-10 XGC Men's Cycling Shorts/Bike Shorts And Cycling Underwear With High-Density High-Elasticity And Highly Breathable 4D Sponge Padded www.amazon.co.uk/dp/B07BDJP64W (archive). Grey color, red inner butt padding. 2020-08: after using it a lot, noticed that the padding stiches started to come off a bit.
2018 (?) Extremities XDRY gloves Looks like: www.sportsdirect.com/extremities-wp-p/line-glove-91-907293 (archive) Gets wet after a few minutes of medium rain. But does dry quickly. Baggy, multilayer. Says 40 pounds, but always at 20 pound discount, so it is just a marketing trick. On website: Outershell 96% Polyester/4% Lycra (Spandex)Palm 45% Polyester/55% PolyurethaneLining 100% Polyester
2017-09 Trespass Cruzado Male Gloves size S. www.trespass.com/cruzado-unisex-gloves (archive) Markings: crossover gloves. Technical Performance TP75: www.trespass.com/advice/trespass-tp-ratings-guide/ Lost right hand around 2018/2019.
2017 Muddy fox cycling Jersey, orange, polyester, Large, cheap. Works well enough I guess. Could be a bit more tight fitting.
2017 www.ebay.co.uk/itm/254646634761 Karrimor X Lite Run Black Headband. I think I lost it 2022-04, already had a hole in one ear.
2015 UNIQLO tights 53% cotton, 32% polyester, 15% elastane. 2020-08: after riding it a lot, it ripped a bit near upper inner tights.
2015 Odlo top and tights, polyester. Not sure exact model, not necessarily meant for cycling. Top does not fit tightly, did not feel like it was removing sweat effectively.
Read the full article
dhb Dorica MTB Shoe (2020-12) Updated 2024-12-15 +Created 1970-01-01
View more
Black EUR 44, 1 smaller than normal size as recommended by website.
Bought SM-SH56 cleat to accompany.
When it arrived, it felt a bit too long, around 2cm maybe free space after toe, and when I walk and the front part touches ground, heel comes off a bit, which is annoying. But I was too lazy to give it back and take the risk of a second try, also it felt correctly tight on sides. During first test ride it felt good.
It is slightly water proof. But if it rains a lot, it will get soaking wet. And once it does get wet, it feels like it is very very hard to dry, there don't seem to be any holes underneath.
Read the full article
Kross bicycle (2017) Updated 2024-12-15 +Created 1970-01-01
View more
Trekking bike bought second hand in 2017. Seller confirmed it is this one www.kross.pl/en/2012/trans-alp (archive) but male version (now shown clearly on website, but both exist).
2024-02: noticed pump was finally stolen. Certainly the drug addicts can't even get 1 dollar for it. TODO identify and rebuy.
2023-08: redoing drivetrain: Shimano HG51 8 Speed cassette 11-32t, Shimano HG40 8-speed chain, Shimano FC-M311 48T/38T/28T 175mm cranckset, first two from Amazon, last from www.santafixie.co.uk/shimano-altus-fc-m311-175-mm-crankset-black.html does not include elivery but still was the cheapest I could find, 4 pounds. Likely not worth the signup effort, but we gotta fight Amazon when they are beaten on prices for moral reasons...
2023-03: Rebuying HG40 8 speed chain 116L, Never paid attention to link counts before, dude said I might have to remove two. There are three options 114L, 116L and 118L
2022-08 I can't take the cassette out anymore again... first tried to remove correct side, didn't manage. Tried the other side, wrong one, and it ticked about 10 times. Then saw video, and initial side was correct. That piece is extremely asymmetric... it is a problem.
2022-08: front mudgard was unbearably noisy, put on the new one I had bought long ago. Asked bike shope person to cut 2.5cm from each metal stick which was way way too long, measured this quickly by placing the new one on top of the new one without attaching. After I got home, noticed it was still too long. At home I noticed one was better than the other, this is because the attach point is not centric on the wheel like on the back, so it requires different cuts. Going to cut again 1cm on one side, 2cm on the other, so total from start would have been 3.5cm and 4.5cm.
Got a puncture on back tire, perfect little point, but on the interior. Could not determine cause. Noticed that the "thumbs up" patch sets that came with the COZYROOMY tire lever were kind of crap, barely held. Made test to see if will deflat or not. Bought a Weldtite cure-c-cure puncture repair kit instead: www.amazon.co.uk/dp/B003GBBQGM. Looks good.
seatpost making clicking noises again... seems to be from collar area, since already changed several time seatpost. Went to shop and they: 1) cleaned surfaces with rag and some cleaning oil 2) aligned hole in tighenener thing with that of frame 3) tightened well. Let's see. People also recommend greasing the clamp bolt:
2022-08: Topeak Aero Wedge saddle bag stolen in city center, bought many years ago, don't have exact product. Quite incredible that something so cheap, unsellable, and unusable except by a sportsperson would be stolen. Looks like this: archive.ph/wip/atSJK, not like the identically named 2022 produc with two zippers. Rebuying the new two zipper model: www.wiggle.co.uk/topeak-aero-wedge-buckle-medium-saddle-bag Edit: was wrong one, medium is humongous, likely wanted small 18 - 11 - 8.5 instead, two zipper is not a new model, it is a medium vs small issue rather. Exchanged for the small.
Rebuying HG40 8 speed chain.
2022-05: weighed the bicycle for the first time. 17 kg without any optionals
Broke front part of front mudgard when trying to put bicycle in bike bag without front wheel. Fuck. Surprisingly brittle.
2022-04: could not remove pedals with small 10cm wrench, preparing for trip. Took it to mechanic, they removed without any problem with a Park Tool PW-4, and greased. Glad to see it was not stuck. After that, I was able to remove myself with my 10cm non specialized wrench. Considering getting the Park Tool PW-5 instead of PW-4 which is half the price and just a bit less long. OK Bought it.
2022-03: changed chain after it reached the limit. Very slight slippage on gear 6 as usual, but did not seem enough to require changing the cassette, but rebuying it as soon as I find a good price for next chain for sure, rebuying Shimano HG51 8 Speed 11-32t. OMG it is so expensive now, stocks our out everywhere!
Besides that, have been hearing some noises from the seat post that are worrying me... it never ends... rebuying a Brand-X Layback Seatpost 27.2 diameter 350mm length post to debug.
Also getting Shimano SM-SH56 cleat, there was a deal with 3 pairs so getting 3 pairs now.
2021-11: seatpost making noises again... going to try a Brand-X Layback Seatpost 27.2 diameter, which does not have the useless suspension, and has a double bolt system, and sells on wiggle which is a good sign.
2021-11: 3 days after a ride, tire was empty, thought it was vandalism. Inspected, could not see any issues, did a 75km ride, and left a gain, and again it lost air quickly. Opened up tire, and found a thorn of some plant pierced inside, almost invisible from the outside. It also feels like the thorn stuck in place and reduced the rate of air loss, after removing the tube it lost air quite quickly. Could not fully remove thorn, can still feel it with my finger, but too well stuck in tire, but I don't think it is enough to pierce again, I just put a patch set on top of it, and new tube Schwalbe 700C 28'' AV 17, got two of those.
2021-11: trickling noise coming from front wheel. Going to get a new one without the generator which I have use anyways and see if it solves it: www.tredz.co.uk/.M-Part-Shimano-Deore-Hub-on-Mavic-A319-700c-Rim-Complete-Wheel_35638.htm M Part Shimano Deore Hub On Mavic A319 700c Rim Complete Wheel. Getting www.amazon.com/dp/B004TGL57S Raleigh TRT701 Wheel Rim Tape - Red, 700c
2021-10: changed chain for new one. Found out that the one I bought did not have a quicklink... Also, it did not come in the original package, but in a sealed plastic bag, presumably to reduce shipping costs. www.amazon.com/dp/B004XVQ2O0 have to be more careful next time. Lost the Shimano 500ml bottle, was strapped on back carrier of bike, but not safe enough, and I went through rough terrain. Had seen it fall off once before another time, but very rare. When I noticed, had no idea where it had fallen off and didn't go back for it. Buying:
Fit perfectly. Luckily Amazon made me buy two Versamounts, because I needed to use one for each bottle, as the holes on the frame were too close to the bottom and made it impossible to fit both otherwise.
2021-09-05: chain reached 0.75, rebuying HG40 8. Also buying second set of break pads, front is gone, and back almost, gonna swap both at once.
2021-08: back side of teeth of seat post wore off, and the seat is rotating vertically. Identification: markings: ELC (maybe middle letter worn off). 27.2 diameter / 350, 350 is the length from Googling. Has a simple shock absorber system and a single pin to attach the seat. OK, something very similar or the same: www.amazon.com/dp/B08N9ZTD22. BESNIN Suspension seatpost. Full markings are: HARD MDU INSIDE under seat clamp, these match exactly. Tube markings are a bit different.
2021-08: noticed that there was a stone stuck inside back tire. Luckily didn't puncture. TODO was it in the same place as the previous puncture? Not far from Schwalbe mark. Rebuying... and answering bicycles.stackexchange.com/questions/9827/when-should-you-replace-tires-after-getting-a-flat Going to buy Shoe Goo as well to see if it works: www.amazon.co.uk/Shoe-Goo-Crystal-Permanent-Adhesive/dp/B08P5V9GQV
2021-08-12: after putting new chain on, if I step hard on pedal on 6th gear, by far the most used, it skips. Seems to be the same symptom as 2020-12 when cassette was worn off, as the shifting itself seems fine. bicycles.stackexchange.com/questions/8378/difference-between-shimano-hg51-8-speed-cassette-and-shimano-hg50-8-speed-casset says hg51 is compatible, so getting that newer model. 11-34t was much more expensive/less common than 11-32, so getting 11-32. Managed to install it without any problems.
2021-08: bought Shimano HG40 8 speed chain and put it on bike
2021-07:
  • rear shift cable snapped inside shifter during rid, same as 2020-10, same symptom that could never index higher tension gears well bought new cable
  • chain reached 0.75+
  • tried to put front mudgard on, but several problems on this one. The screws needed are wider than those that come. Could keep old ones. But then on top of that, the metal bars are too long and would need cutting about 2 cm, so keeping the old front mudgard for now, which is working perfectly.
2021-06-05: finally removed the old bottom bracket and installed installed the one I had bought a few months back. What triggered this was the clicking noise back again. It appears that the noise got louder with the heat. The clicking noise went away after changing the new bottom bracket. The old bracket seemed fine after inspecting it closely after removal. There was a bit of dirt/earth inside, and some small chippings came out of one side, not sure if from BB or from the frame itself. There are still some other much less loud noises left however, but they are likely a different source, and not a big issue. The clicking noise: www.youtube.com/watch?v=rXBdPg1LhQU
2021-05: got the first flat tire ever on the back wheel! A perfectly shaped pointed triangular rock slotted perfectly into the thread and managed to perforate the inner tube. Managed to patch it up perfectly on the road, 2 hours away from home! The inside of the tire is basically intact, so I'm going to keep using it. The next day I put back an old intact inner tube I had replaced preemptively earlier on with this new one that was punctured.
2021-04: put on the Bluemels mudgard on the back. It wasn't hard, and their system seems quite easy to adjust. Chain reached 1.0 stretch, gotta get a new one.
2021-03: clicking noise when pedalling strong driving me crazy. Likely bottom bracket: bicycles.stackexchange.com/questions/41149/something-clicks-while-pedaling or maybe pedal. Re-buying the exact same Shimano BB-UN55 Bottom Bracket - Silver, 68-118: www.ebay.co.uk/itm/224364037969
2021-03: buying mudgard replacement, going for: SKS Bluemels Shiny 45 mm 28" Mudguard Set Silver www.deporvillage.net/sks-bluemels-shiny-45-mm-28-mudguard-set-silver 28 pounds with delivery, which looks like the most similar to the old one. Partially choosing that seller because they are the only ones capable of using the precise product name as shown on the SKS website so I'm sure what I'm getting. It does not have flaps though. But flaps fall off and get lost, so fuck it. SKS range: www.sks-germany.com/en/products/bluemels-series/
2021-03-07:
Only for side wall machined rims. Performs especially well in wet conditions and may pass DIN standard. Tend to be low noise, low rim wear and fade.
It appears that "non-machined rims" don't exist anymore: www.tetongravity.com/forums/showthread.php/183806-How-important-are-machine-sidewalls-vs-non-machined
  • buying another Schwalbe Men's Marathon Plus Tour Hs404 Performance Line Rigid Tires Size: 700 x 40C for the front wheel which is completely worn off like the back one was: www.amazon.co.uk/dp/B001IHUC0W?th=1&psc=1 33 pounds.
2021-03-07: one of the wires of the rear mudguard broke due to vibrations! It still kind of works, but gotta get a new one.
2021-02-20: replaced new wheel. Worked fine. Also measured chain stretch between 0.5 and 0.75.
2021-02-14: in preparation for wheel switch, also getting www.wiggle.co.uk/shimano-m-system-m600-pair-of-brake-blocks Shimano M-System M600 Pair Of Brake Blocks. More precise markings: M70T3 Deore LX, AL (aluminium) si.shimano.com/pdfs/ev/EV-BR-SHOE-ATB2-1414L.pdf Reads: "Performs especially well in wet conditions and may pass DIN standards. Gives off less noise, but the pad is heavier, faster rim wear and tends to fade. "
2021-02-11: tried to put the new wheel in. Made a few discoveries:
  • I can't take the cassette out anymore again, even though I put it on myself, and the day I put it on, I took it off once to check if I could, so rebuying Shimano Claris CS-HG50-8 11-34t www.ebay.co.uk/p/2252255352, and if I ever have to take the old one off, I'll take it to the store again
  • the tire on the old wheel was on the reverse direction, had been ridden for a very long time like that, and the threads are extremely worn
  • after making insane efforts earlier to put the tire on the wheel, and knowing about directionality, when I actually took it down I noticed I had at some point of my suffering swapped sides and put it on the wrong way in......
  • I weighted the wheel for fun, assembled with unfilled tire and without the cassette was about 2.5kg
2021-01: ETC Rim Tape 700 40C for the new wheel. No packaging, but possibly: www.amazon.co.uk/dp/B0063HIIOY
2021-01: moved the saddle forward a bit to 1.8cm was still feeling scapulas before, now seems perfect. Not much effort on hamstrings, but I don't know how to fix both, and not having pain is more important
2020-12: moved the saddle forward back to 2cm, was feeling too much pressure on lower back, and on previous ride, the most tired part of body was behind scapulas, so presumably due to overreach. Felt immediately better.
2020-12-22: felt like rear hub had a bit of friction, can't fix vibration, going to try the buying a new whole wheel:
  • www.bikeparts.co.uk/products/m-part-shimano-deore-mavic-a319-silver-dt-swiss-p-g-36-hole-rear-wheel Found by Googling same rim as original "Mavic A319". Site markings: WLC503 M PART SHIMANO DEORE / MAVIC A319 SILVER / DT SWISS P/G 36 HOLE 700C HYBRID REAR WHEEL. Cannot find a single website that gives exact rear hub model, but hopefully Deore will match, looks the same. 70 pounds. Does not come with rim tape.
  • Schwalbe Men's Marathon Plus Tour Hs404 Performance Line Rigid Tires Size: 700 x 40C. Just going to get the entire thing to have leave a backup wheel.
2020-12-21: put in the new cassette, chainring and chain. Shifting is amazing once again. When pedalling strong on the test run it felt like something on the back hub was vibrating... gotta debug that. Maybe not enough force on closing the cassette?
2020-12-20: tried to replace entire drive chain after over stretched chain destroyed teeth. Chainring and pedals came off nicely, but cassette was stuck, but I took it to the shop and they managed: bicycles.stackexchange.com/questions/18465/how-can-i-remove-a-stuck-rear-cassette/74041#74041
2020-12: moved saddle back to 2.5cm mark to try and get more hamstring action, but back started hurting. Moved to 2.2cm half way through ride, and it seemed perfect.
2020-12: moved seat post down after www.youtube.com/watch?v=FNGMRtJ5LIc mentioned that saddle too high causes greater asymmetries which I had felt. With dhb Dorica MTB Shoe (2020-12) with cleats straight on 2-mark. First down 15mm from max, but felt really too low. Then down only 7.5mm, and felt great, possibly better than before.
2020-12: moved 2020-04 Giro Rumble VR Off Road Shoe cleats all the way back, and turned the left one a bit outward to better fit let. Got more tired on hamstrings than on quads now, gotta improve that later on maybe for better balance.
2020-12: put more WD-40 on front shifter. Let it dry, then "WD-40 Bike, All Conditions Lube Bicycle". After next four hour ride, shift to 3rd was still working perfectly. Found the culprit.
Put back the rear mudguard. Wheel not hitting it for now. Lost the extra appended protector thingy, was sure I saw it during installation, so maybe it just fell off during next ride? Can't find it at home. Does not make much different for me, might help others behind me though.
2020-12-05: 4 hour ride, very wet and dirty, on start could get into third perfectly, but at end couldn't anymore!!! So it must have been an issue with lubrication on the bottom shift mechanism.
2020-12-01:
  • test rode 3rd gear shift, completely smooth now!
  • put back the new saddle Selle Royal Scientia, and inspired by www.youtube.com/watch?v=ZX3fKolI25Q moved the saddle to 2cm position because I had never felt my hamstrings. It did feel much better! I felt my hamstrigs more, and butt took much longer to get soggy, maybe only around 2 hour mark! Started feeling lower back more though.
2020-11-30:
  • fixed the can't get into 3rd gear problem. Did the following:
    • without cable tension, it changed easily
    • sprayed HD40 on shifter and hinges near bottom bracket
    • still didn't shift
    • reduced tension. This made me manage to change to the 3rd. It must be highlighted how sensitive this was to tension. 5 quarter screws on the shifter barrel were the difference between being able to shift or not
    • one more thing Ciro noticed, is that he had possibly previously held up the front gear before attaching the cable, therefore possibly overly tensioning it. It might be better to just instead pull the end of the cable with a pair of pliers to remove slack, but wihtout making the gear move up, that is enough. Then finish tuning on the shifter arrel adjuster
    • then since everything was out and ready, also changed shift cable just in case. The new one had a bit less friction, but not a lot less, so it did not feel like it was what solved the problem
  • also better inspected the chainrings. Middle one is visibly worn due to the century old chain, even more so than the teeth of the cassettes on the back.. so here we go again, more Shimano FC-M311: www.bikeparts.co.uk/products/shimano-fc-m311-altus-square-taper-chainset-48-38-28t-with-chainguard-175-mm Can't find how to buy just chainring itself.
2020-11-28: can't stand slippage anymore, going to change cassette too, rebuying Shimano Claris CS-HG50-8 11-34t: www.ebay.co.uk/p/2252255352 20 pounds
2020-11-26: left hand large gear almost impossibly hard to switch to largest gear. The gear switches on chainring, but it won't click and stay in place, related: bicycles.stackexchange.com/questions/46172/front-shifter-wont-shift-into-3rd
2020-11-22: put back old saddle, one inch from back, did 6 hour ride, it is more comfortable than new one. Butt was soggy at some points, but much less than new saddle.
2020-11-19: noticed that chain slips if I pedal very strongly, and especially if I try to stand up: bicycles.stackexchange.com/questions/7928/why-does-my-gear-slip-when-going-uphill-standing Does not happen on the largest chainring. Have to check the smallest one, as it is harder to check there. Took to shop, they said chain worn out with tool measurement, and cassette worn out.
Bought Shimano CN-HG71 8 speed chain 19 pounds, with quicklink: bike.shimano.com/en-EU/product/component/city---trekking-e-bike-e6100-series/CN-HG71.html | bike.shimano.com/en-EU/product/component/city---trekking-e-bike-e6100-series/CN-HG71.html, it is from the Acera line. The price in-store was good, on Amazon Prime, would have been 27 pounds! www.amazon.co.uk/dp/B00JJWR12U There were two chain options, a cheaper 12 pound one, and the more expensive. TODO difference? Maybe the cheap one is CN-HG40, which is from the Tourney line?
I inspected the cassette myself later on, but it did not appear significantly worn out in my newbie opinion.
2020-11-08: used park Tool PAW-12 adjustable wrench and park Tool BBT-22 to remove bottom bracket to debug noise. After putting everything together, it seemed gone on a very short test ride. The bottom bracket itself seemed fine. There was a bit of dirt, but didn't seem critical. What felt more off was that the drive side cranck arm came off much more easily than the non-drive side one, suggesting it was not tight enough. www.youtube.com/watch?v=cPQyQnNdews "Crank Removal and Installation - Three Piece Crankset (Square Spindle, ISIS, Octalink)" by Park Tool (2015) suggests that this is a common cause of noise, so maybe removing the bottom bracket wasn't needed after all this time. But it's done at least.
2020-11-05
  • moved saddle backwards a bit to 1 cm mark, was feeling like butt was falling off the back a bit at 0 cm. After this, it felt better, but still a bit mushy after 4 hour ride
  • been hearing a clicking noise when pedalling, left foot at about 7 o'clock. Going to open it up.
2020-10-04 bought a new inner shift cable for the rear derailleur from bike shop, bulk without visible branding. The plastic shifter casing screw was stripped, could not get it off. OMG I had done that just yesterday on the road for the diagnosis! How is it possible? So soft!!!! I just proped the plastic open with a flat screw driver and managed to insert the cable. However, the previous problem still remains: I can't get smooth shift to faster gears on the rear.
2020-10-03 was having rear shifting issues for a while, and today it stopped working completely. Opened and noticed that the shift cable had ruptured inside the shifter!!! Related: bicycles.stackexchange.com/questions/40536/shifter-cable-broke-down-misuse-lack-of-maintenance-shifter-or-regular-occurr This has been only 11 months since last change.
2020-08: buying Selle Royal Scientia M2 saddle: www.selleroyal.com/en/scientia-m-2 based on 60 degree riding position and 110mm sitbone distance Ciro Santilli's body. Had felt a little bit of pain on butt muscle but it passed. But also noticed that the UNICLO shorts ripped a bit, and it might be due to the terrible state of the saddle. Felt good on first ride around the block. Harder than previous, and narrower. Feels higher quality and better fitting.
2020-06-06: replaced front brake pads with the Jagire ones previously bought (one pair already been put on rear brakes)
2020-04-19: tried to remove left pedal again with 2020-04 DECARETA Pedal Spanner, put more force, and the tool itself actually got dented and started spinning freely around the pedal. I give up, will change crank arm. Can't find just the left crank arm, and not sure if 170/175, so just buying the entire thing: Shimano Altus FC-M311 Crank set 48T/38T/28T with chaingard: si.shimano.com/pdfs/si/SI-0094A-001-ENG.pdf | si.shimano.com/pdfs/ev/EV-FC-M311-2675A.pdf | www.deporvillage.net/shimano-altus-m311-175mm-78-speed-chain-set-483828-black at 175mm which is the correct one for my height as mentioned at: www.youtube.com/watch?v=vUygkHlcVMQ
2020-04: bought Shimano Deore PD-M324 pedals in preparation for flat to SPD switch: bike.shimano.com/en-EU/product/component/deore-t6000/PD-M324.html (archive) | www.wiggle.co.uk/shimano-m324-combination-pedals, since I'll remove the pedals at somepoint anyways, first learnt at: bicycles.stackexchange.com/questions/30662/can-i-use-normal-shoes-trainers-with-clipless-pedals/30720#30720 can be used with normal shoes too. SPD/plataform double side chosen to so I can both commute with on regular shoes and ride further for sport with SPD shoes. Cleat type: SM-SH56. Praying to God that the thread size is universal as mentioned at: bicycles.stackexchange.com/questions/10162/whats-difference-between-1-2-and-9-16-inch-pedals When they arrived noticed they felt quite heavy! 533g. Let's see. The non double sided is 455g though: www.wiggle.co.uk/shimano-m530-mtb-spd-trail-pedals/. And a full roadie one like PD-RS500 SPD-SL weights 320g.
2020-04: attempted to use 2020-04 DECARETA Pedal Spanner to remove left pedal that would not come off with generic short wrench and has been clicking a bit for several months, and now sometimes appears to do false spins! The think must be completely destroyed. Failed, too hard.
2020-04: was trying to remove left pedal with short wrench I had, impossible. Later noticed that the kick up stand was a bit bent! Tried to turn it around, but did not manage to make it improve much. Later during a ride, the new position was too close to the spokes, and started to hit the spokes! When I got home, tried to remove the fucking kickstand, but it had a flat bolt in a deep place between the rear tubes, and I couldn't do it with my simple wrenches. Went to bike shop next day, and they removed it, likely with a deep wrench. The piece was thrown away.
2020-03: finally installed the new derailleur after long suffering, including new cables and casing on front and back derailleurs and on back brake. Took 3 1-2 hour sessions, but it became amazing.
2020-03: screw on left shifter (yes, the bloody screw) broke when trying to open it to take out cable. Buying left and right since the right one was broken from previous fall. www.amazon.co.uk/dp/B073XQ8J78 SHIMANO ST-EF65-8 EZI FIRE STI SHIFTERS 24 SPEED (3 x 8), 25 pounds si.shimano.com/pdfs/ev/EV-ST-EF65-9R4-3257B.pdf
2020-02: Bought unbranded bike bell sold in bulk from bike shop, 1.50 pound. Markings: SX. Old bell made louder sound. This type of simple mechanism: www.amazon.co.uk/dp/B00GZ3TFFM
2020-01-13: Parked on city center, shitty low diagonal place, crowded. When came back, bike on floor, had dropped hard since front wheel twisted on axis, untwisted with leg. When got home, noticed that right gear shifter was half coming off. Later found out that the piece broken on one of the screws, hanging only by the other screw. Next day morning, noticed that the bell had come off, and was lost, went back on evening but obviously could not find it.
2019-11: Jagire brake pads 2x V 11.50 pounds: jagwire.com/products/brake-pads/cross-rim-brake-pads (archive)
2019-11: Can't index rear derailleur, buying:
TODO exact model. Polish brand. Hybrid style bike: en.wikipedia.org/wiki/Hybrid_bicycle
2019-08-29: rear derailleur fell off, later found it was bent: photos.app.goo.gl/yRgAc1FvKvcuCmcj7 Many bikes were parked together, I think other bikes put gear wires were a bit off, and I started pedalling very strong, and it immediately fell off. Went to repair shop, replaced it likely with: www.amazon.co.uk/dp/B01N51YIYZ (archive) "Shimano Cambio Post. 6/7v RD-TY300 Tourney TX Att. Dir.". Visible markings: "Shimano Tourney Paid 35 pounds, receipt said 25 for piece 10 for service, but piece actually cost 18 on Amazon, and with Prime / larger buys only 7 pounds. I'm also a bit worried because my back cassette is 8 speed, not 7... On official website RD-TY300-SGS: bike.shimano.com/en-EU/product/component/tourney/RD-TY300-SGS.html (archive)
2019-07-26: the front crank was sometimes making loud cracking noises when I pedalled hard. Then, after two weeks, it also started making very loud screeching noises, and then finally I couldn't pedal anymore, and I took it to the shop. They changed the bottom bracket, 45 pounds, 30 for the piece, a Shimano BB UN55 bottom bracket markings: SEALED CARTRIDGE UNIT, SHIMANAO BB-UN55, VIA INDONESIA, 68 QC BC1.37x24, L XL118 R:
Photo of the piece that was taken out, notice some broken metal pieces and one of the ball bearing that were left: photos.app.goo.gl/6sqbM4kgDG5Pm7p58 Replacement/servicing:
2019-08: front mudguards were making too much noise, cannot find brand. Removed them. Then in 2019-10 rain started, and I bought a new one.
2019-06-30: fill tires, using 90PSI, was TODO
2019-06-20: right gear wire broke, when opened for fixing was rusty near hand shifter
2019-04-07: fill tires, using 90PSI, was 40PSI. Also on Giant Flourish.
2019-03-30: repair bearings back wheel, true back wheel, remove rust from chain. Result: 50 pounds:
Tick on back wheel stopped. Back brake did not get better. Gears not improved. Rust remained, was told too hard to remove, and not on teeth, so should not matter.
2018-09-02: spoke www.dtswiss.com/en/products/spokes-nipples/spokes/dt-champion/ + minor brake work 41 pounds full work
2018: front tire blew up and was replaced by TODO.
2017: bought, specs:
Bottom bracket: TODO, have a picture after it broke later on and was removed by shop, but did not catch full markings, visible: JIS DIN EN-14777. JIS stands for Japanese Industry Standard (JIS), related: www.velodrome.shop/square-taper-jis/iso/
Saddle: completely destroyed when he decided to identify it for replacement in 2020. Website said "Selle Royal Freedom Royalgel". Markings (badly worn out): "yalgel", freeDom inscribed on saddle, so that's it.
Frame markings: Trekking (two stylized trees on left, one with two triangles and the other 3 triangles), Frame Size: M. Feels more or less the right size for me. Maybe L would be better, as my butt tends to go off the back of the saddle, which I always cranck to the most backward position possible. Markings under bottom bracket: on metal: LY2B 016042 KROSS EN1746. On a sticker, badly worn off: K828130 2?Z018 0004.
Gear shifters: don't know exact model since could not find markings (fuck you Shimano?) but from photos online, seems to be one of the ST-EF* family EZ FIRE, e.g. ST-EF65-8 or ST-EF500.
Back wheel: quick release.
Front wheel: no quick release, wrench size 15mm.
Back tire: Schwalbe Marathon Plus Tour 42-622 (28 x 1.60, 700x40C) www.schwalbe.com/en/unplattbar.html (archive)) Puncture resistant.
Back hub: Shimano FH-RM30, so possibly FH-RM30-8-QR mentioned at productinfo.shimano.com/download?path=pdfs/archive/2010_SPECIFICATION.pdf
Rear rim markings: Mavic, A319, Made in France, inserted in 36 hole marking, therefore presumably shop.mavic.com/en-gb/a-319-j24500.html#1028=3283&1035=3501 Aluminium alloy 6106
Back light: AXA Basta Ray LED Rear Light. Markings read: "basta X-Ray Steady STANDLICHT Z K 257 TP RBi 1017". Powered either by 2 AAA bareies in series or by the front hub dynamo: www.bike24.com/p213276.html | web.archive.org/web/20190821070347/https://www.bike24.com/p213276.html
Front tire: did not take note, was later changed.
Front light: AXA Sprint 10 Switch LED Front Light www.bike24.com/p213267.html Wire connector for back light: "Crimp Quick Disconnect Terminals". Tried 2.5mm but too large, size refers to each left/right wrinkle.
Grips: Herrmans Primergo, looks like this: www.amazon.co.uk/dp/B01LZSJ30Q
Pedal: flat/platform crap :-) Markings: "FP-910", exactly like the photo: www.ebay.co.uk/i/114124689225 (archive) but can't find the brand, very generic.
Crankset: markings "Shimano", "FC-M311", "Hyperdrive", "Dual SiS index", from Google part of Altus: si.shimano.com/pdfs/ev/EV-FC-M311-2675A.pdf (archive). There are two possible tooth counts, I counted 48T on largest, so it is the 48/38/28 one. There are two arm sizes though, 170mm vs 175mm, not sure which one mine is, very hard to measure, I think it was 170mm. Installation at: si.shimano.com/pdfs/si/SI-0094A-001-ENG.pdf (archive) says to use "8 mm Allen key or a cotterless crank extractor (TL-FC10)". Identification: youtu.be/VMV-SOIhM2c?t=258 "Three Piece Crank of type Square Tapered Spin"
Front derailleur: markings Shimano Altus, 66-69 degrees, blue circle with two balls hyperdrive logo on top. Possibly Shimano Altus Front Derailleur FD-M310: si.shimano.com/pdfs/ev/EV-FD-M310-2676B.pdf
Mudguards: markings "Orion"
Stem: it is a "adjustable quill style" stem, comparable to this one: www.youtube.com/watch?v=Tj_xaQ-o88o but not exactly the same thing. Another comparable one: www.amazon.co.uk/Raleigh-GNJ251-Adjustable-Quill-Handlebar/dp/B004XVPVI8/ Another: www.youtube.com/watch?v=7aXu2J3m5ws very close to as shown on that video.
Read the full article
Shoes Updated 2024-12-15 +Created 1970-01-01
View more
For sizing see also: Ciro Santilli's body.
Read the full article