 Joule heating

Joule heating is the dissipative conversion of electrical work into internal energy in an electrical conductor. In a metal, the electric field supplies energy to charge carriers, which transfer it to the material. This makes an immersed resistor a useful calibrated heater and makes electrical resistance a source of losses in wiring. Wind-driven electric currents are a proposed source of heating of an inflated giant planet.

For a stationary, purely resistive Ohmic conductor, use the passive sign convention: $V$ is the terminal electric potential difference from the entry to the exit of positive electric current $I$. The absorbed electrical power and Ohm's law giveThe last two expressions assume $V=IR$ at the relevant material temperature. For constant electrical resistance and electric current over a duration $\Delta t$, the dissipated energy is $E_{\mathrm{diss}}=I^{2}R\Delta t$; otherwise use $E_{\mathrm{diss}}=\int V(t)I(t)dt$. In SI, $\mathrm{V}\mathrm{A}=\mathrm{W}=J/s$.^[ref]

Absorbed electrical power $VI$ is more general than Joule heating: a capacitor can store energy, a battery can change its chemical energy, and an electrical circuit can deliver mechanical work or emit light. Even a heated resistor need not show an indefinitely rising temperature: in a thermal steady state, its dissipated power leaves by heat transfer. With the heater inside a calorimeter boundary, electrical input crosses as work; the subsequent heat transfer to the room is a different term in the first law of thermodynamics.

Joule heating, also known as resistive heating or ohmic heating, is a process in which the energy of an electric current is converted into heat as it flows through a conductor. This phenomenon occurs due to the resistance of the material to the flow of electric charge.