 Measuring transducer

A measuring transducer is a device whose output quantity has a specified relation to its input quantity and is used in measurement. VIM examples include a thermocouple, a strain gauge and a Bourdon tube.^[ref] A measuring transducer provides a link in a measuring chain; it need not itself display a finished measurement result.

For an original pressure readout, choose a linear modelwith pressure $p$, output electric potential difference $V$, transducer sensitivity $S=2\mathrm{mV}\mathrm{kP}{\mathrm{a}}^{-1}$, and offset $V_0=1\mathrm{mV}$. An output $V=201\mathrm{mV}$ then corresponds to $p=100\mathrm{kPa}$. An amplifier, analog-to-digital converter and display can follow the transducer, each contributing to the whole measuring system.

The inverse calculation $p=(V-V_0)/S$ exposes distinct uncertainty contributions. Holding the other inputs fixed, a small output change $\delta V$ changes inferred pressure by $\delta V/S$; a small offset error changes it by $-\delta V_0/S$. An output increment $0.2\mathrm{mV}$ corresponds to $0.1\mathrm{kPa}$ for the stipulated sensitivity, but does not establish a total measurement uncertainty of that size.

Characterize the relevant range, temperature conditions, response time and possible instrumental drift during measurement calibration. The relation can be nonlinear, in which case local transducer sensitivity is the appropriate derivative rather than one gain valid everywhere. The definition also allows input and output quantities of the same kind; it does not require changing from a mechanical quantity to an electrical one. A sensor denotes the part directly affected by the phenomenon being sensed, whereas a complete measuring chain can contain further measuring transducers.