 Thermometer

A thermometer measures temperature through a physical response whose relation to temperature is known. Examples include the length change from thermal expansion, a change in electrical resistance, and the pressure of a gas thermometer. If the response function $X=f(T)$ is an injective function over the working range, its measured value determines $T=f^{-1}(X)$ through the inverse function. Thermometer calibration establishes that relation for the particular instrument and measurement conditions. Two matching readings are meaningful only after calibration to a common scale and with the probes sampling comparable equilibrium states. ^[ref]

For a contact thermometer, the sensing part must reach thermal equilibrium with the region being measured. That region may differ from the rest of the object: an immersed probe near a heater can read a local temperature while the surrounding water remains cooler. A stable reading can also be a steady state set by competing heat transfer paths to the sample and the room. Good contact, adequate immersion, mixing where appropriate, and checks for spatial differences help establish which temperature the reading represents. These are measurement controls inferred from the thermal equilibrium requirement, not a guarantee that every flat trace is equilibrium.

A thermometer also changes the sample it touches. Consider an original toy calculation with an initially uniform sample at $T_o=350\mathrm{K}$, a probe at $T_p=300\mathrm{K}$, and constant whole-body heat capacities $C_o=100\mathrm{J}{\mathrm{K}}^{-1}$ and $C_p=1\mathrm{J}{\mathrm{K}}^{-1}$. Suppose together they form an isolated system, with no work or phase transition and negligible contact energy. The first law of thermodynamics and thermal equilibrium giveThe final thermometer reading underestimates the sample's original temperature by about $0.495\mathrm{K}$, although it correctly measures their new common temperature. The disturbance becomes small when the participating probe heat capacity is small compared with the sample's. A large controlled heat bath is a different limit: it supplies or removes heat while approximately maintaining its own temperature.

Waiting time is a separate issue from disturbance. Under a toy Newton's law of cooling model for a uniform probe in a maintained heat bath, a constant contact conductance $G$ givesThe time constant $\tau$ controls this exponential decay. For stipulated values $T_b=350\mathrm{K}$, $T_p(0)=300\mathrm{K}$ and $\tau =5\mathrm{s}$, the probe reads about $331.61\mathrm{K}$ after one time constant and $347.51\mathrm{K}$ after three. These are calculated values, not an instrument specification or measured data. Real probes may have multiple relaxation times and additional heat transfer paths; choose an equilibration criterion from the required accuracy, rather than assuming that a fixed waiting time works universally.

A thermometer is an instrument used to measure temperature. It provides a quantitative value of heat or coldness and can be used in various applications, including weather measurement, scientific research, medical diagnostics, cooking, and industrial processes. There are several types of thermometers, each operating on different principles: 1. **Liquid-in-glass Thermometers**: These contain a liquid (often mercury or colored alcohol) that expands and contracts with temperature changes. The level of the liquid indicates temperature on a calibrated scale.